Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2017-07-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Introduction to Fluoropolymers written by Sina Ebnesajjad and published by William Andrew. This book was released on 2013-05-11 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fluoropolymers demystifies fluoropolymers for a wide audience of designers, engineers, sales staff and managers. This important group of high-performance polymers has applications across a wide range of market sectors, including automotive, aerospace, medical devices, high performance apparel, oil & gas, renewable energy / solar photovoltaics, electronics / semiconductor, pharmaceuticals, and chemical processing. Dr. Ebnesajjad covers the history and applications of a wide variety of materials, including expanded polytetrafluoroethylene, polyvinyl fluoride, vinylidene fluoride polymers and fluoroelastomers, just to name a few. Properties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellant and flame-retardant, with unrivalled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book. - Demystifies fluoropolymers for a broad audience of engineers in areas such as product design and manufacturing, as well as for non-engineers such as technical sales and management professionals - Explains the potential of fluoropolymers for a wide range of applications across sectors such as aerospace, energy and medical devices - Ideal for both recently qualified engineers and engineers with limited experience of fluoropolymers

Download or read book Troubleshooting Rubber Problems written by John G. Sommer and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-01-16 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many challenges confront the rubber technologist in the development, manufacture, and use of rubber products. These challenges include selecting and combining materials to form rubber compounds suitable for processing, successfully operating a range of manufacturing equipment, and meeting product performance in difficult and diverse environments. Case studies and literature references relate problem solutions to the everyday experience of the rubber technologist. From materials to processes to products, this book identifies many different rubber-related problems and suggests approaches to solve them. Contents: • TSE and TPE Materials, Compounds, Processes, and Products • TSE Materials and Compounds • TSE Processes and Equipment • TSE Products • TPE Materials and Compounds • TPE Processes and Equipment • TPE Products

Download or read book The Rubber Formulary written by Peter A. Ciullo and published by William Andrew. This book was released on 1999-12-31 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: A stable usage of rubber compounds in the production of components for almost every industry has created the need for this handbook and formulary. Convenience is the primary reason for such a book. With the variety of uses for rubber being as broad as the imagination, a formulary which includes an overview of the history of rubber, as well as sections on ingredients, processing methods, and testing, is a welcome addition to any manufacturer's library. Rubber products include seals and gaskets for windows, pressure and vacuum hoses for automotive and aerospace applications, bottle stoppers for medical and pharmaceutical products, center cores for all types of balls, belts for tools and machinery, shock and vibration absorbers for everything from motor mounts to sky scrapers, insulation for blankets, and even large film coatings for roofing applications. Additional industrial and consumer products are being designed out of rubber compounds every day.Whether you are involved with selling raw materials, producing rubber compounds, or designing rubber components and products, Rubber Formulary is the right sourcebook of data for your needs. This first-ever collection of 500 suggested formulas has been provided by raw materials suppliers around the world. Written for both technical and managerial personnel, this collection of formulas and basic texts will also benefit students and other individuals just entering the field.

Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book Advances in Elastomers I written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.

Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co

Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants

Download or read book Raw Materials Supply Chain for Rubber Products written by John S. Dick and published by Hanser Pub Incorporated. This book was released on 2014-06-30 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rubber industry is a vital part of the world economy. In this age of constantly changing economics and raw material "shortages of the week," this book should help the reader understand the overall technical and economic problems that are emerging which are beginning to affect the overall availability of many raw materials, chemical intermediates and final rubber products on the world scene. This book is truly unique in that it is the only one that traces all the important organic and inorganic synthesis routes for the manufacture of synthetic rubbers, various fillers, plasticizers, oils, curatives, antidegradants, adhesion promoters, flame retardants, tackifiers, and blowing agents through their respective intermediates to the base raw materials from earth extractions and agriculture.

Download or read book Multicomponent Polymeric Materials written by Jin Kuk Kim and published by Springer. This book was released on 2016-08-26 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers an in-depth review of the materials design and manufacturing processes employed in the development of multi-component or multiphase polymer material systems. This field has seen rapid growth in both academic and industrial research, as multiphase materials are increasingly replacing traditional single-component materials in commercial applications. Many obstacles can be overcome by processing and using multiphase materials in automobile, construction, aerospace, food processing, and other chemical industry applications. The comprehensive description of the processing, characterization, and application of multiphase materials presented in this book offers a world of new ideas and potential technological advantages for academics, researchers, students, and industrial manufacturers from diverse fields including rubber engineering, polymer chemistry, materials processing and chemical science. From the commercial point of view it will be of great value to those involved in processing, optimizing and manufacturing new materials for novel end-use applications. The book takes a detailed approach to the description of process parameters, process optimization, mold design, and other core manufacturing information. Details of injection, extrusion, and compression molding processes have been provided based on the most recent advances in the field. Over two comprehensive sections the book covers the entire field of multiphase polymer materials, from a detailed description of material design and processing to the cutting-edge applications of such multiphase materials. It provides both precise guidelines and general concepts for the present and future leaders in academic and industrial sectors.

Download or read book Handbook of Elastomers Second Edition written by Anil K. Bhowmick and published by CRC Press. This book was released on 2000-11-02 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides the latest authoritative research on the developments, technology, and applications of rubbery materials. Presents structures, manufacturing techniques, and processing details for natural and synthetic rubbers, rubber-blends, rubber composites, and thermoplastic elastomers. 80% revised and rewritten material covers major advances since publication of the previous edition."

Download or read book Tribological Applications of Composite Materials written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-14 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the current advances and practices in tribological applications of composite materials under various processes, presenting the development, characterization, and morphological properties of composite materials in tribological applications. It covers a wide range of subjects, extending from fundamental research on the tribological characteristics of various multi-phase materials to the final applications of composites in wear loaded, technical components. It brings together contributions from researchers who discusses innovative experimental approaches and analytical techniques, creating a reference with comprehensive coverage of modern research techniques and the potential application of tribological composites in biomedical, aerospace, automotive, marines and construction industries. This volume will be of interest to material science researchers working in both industry and academia

Download or read book Handbook of Building Materials for Fire Protection written by Charles A. Harper and published by McGraw Hill Professional. This book was released on 2003-09-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first handbook devoted to the coverage of materials in the field of fire engineering. Fire Protection Building Materials Handbook walks you through the challenging maze of choosing form the hundreds of commercially available materials used in buildings today and tells you which burn and /or are weakened during exposure to fire. It is the burning characteristics of materials, which usually allow fires to begin and propagate, and the degradation of materials that cause the most damage. Providing expert guidance every step of the way, Fire Protection Building Materials Handbook helps the architect, designers and fire protection engineers to design and maintain safer buildings while complying with international codes.

Download or read book Vehicular Engine Design written by Kevin Hoag and published by Springer Science & Business Media. This book was released on 2007-02-05 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical engineering curriculum in most universities includes at least one elective course on the subject of reciprocating piston engines. The majority of these courses today emphasize the application of thermodynamics to engine ef?ciency, performance, combustion, and emissions. There are several very good textbooks that support education in these aspects of engine development. However, in most companies engaged in engine development there are far more engineers working in the areas of design and mechanical development. University studies should include opportunities that prepare engineers desiring to work in these aspects of engine development as well. My colleagues and I have undertaken the development of a series of graduate courses in engine design and mechanical development. In doing so it becomes quickly apparent that no suitable te- book exists in support of such courses. This book was written in the hopes of beginning to address the need for an engineering-based introductory text in engine design and mechanical development. It is of necessity an overview. Its focus is limited to reciprocating-piston internal-combustion engines – both diesel and spa- ignition engines. Emphasis is speci?cally on automobile engines, although much of the discussion applies to larger and smaller engines as well. A further intent of this book is to provide a concise reference volume on engine design and mechanical development processes for engineers serving the engine industry. It is intended to provide basic information and most of the chapters include recent references to guide more in-depth study.

Download or read book Industrial Minerals and Their Uses written by Peter A. Ciullo and published by William Andrew. This book was released on 1996-12-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored handbook is a unique cross-industry resource for formulators and compounders, and an invaluable reference for the producers of formulated commodities and industrial minerals. Monographs on each of the common functional industrial mineralsùasbestos, barite, calcium carbonate, diatomite, feldspar, gypsum, hormite, kaolin, mica, nepheline syenite, perlite, pyrophyllite, silica, smectite, talc, vermiculite, wollastonite, and zeoliteùinclude an overview of natural and commercial varieties, market size, and application areas. These are supported by descriptions of mineral structures and the wedding of minerals and chemicals through mineral surface modification. This orientation to the minerals and their uses forms the foundation for chapters where they are presented in the context of the overall technology of various consuming industries. Each of these industry-specific presentations covers both the chemical and mineral raw materials used by the formulator, how these are combined, and relevant test methods. These chapters serve a dual purpose. Each clarifies for technologists the function and value of the mineral constituents of their products. Equally important, they provide a primer on the technology of industries other than their own, so that raw material, formulation, processing and testing considerations can be compared and contrasted.The book concludes with a formulary demonstrating how specific mineral and chemical ingredients are actually compounded in major application areas, and technical data on scores of commercial mineral products.