Download or read book Raw Materials Supply Chain for Rubber Products written by John S. Dick and published by Hanser Pub Incorporated. This book was released on 2014-06-30 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rubber industry is a vital part of the world economy. In this age of constantly changing economics and raw material "shortages of the week," this book should help the reader understand the overall technical and economic problems that are emerging which are beginning to affect the overall availability of many raw materials, chemical intermediates and final rubber products on the world scene. This book is truly unique in that it is the only one that traces all the important organic and inorganic synthesis routes for the manufacture of synthetic rubbers, various fillers, plasticizers, oils, curatives, antidegradants, adhesion promoters, flame retardants, tackifiers, and blowing agents through their respective intermediates to the base raw materials from earth extractions and agriculture.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Rubber Products Manufacturing Technology written by AnilK. Bhowmick and published by Routledge. This book was released on 2018-10-03 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides authoritative coverage of compounding, mixing, calendering, extrusion, vulcanization, rubber bonding, computer-aided design and manufacturing, automation and control using microprocessors, just-in-time technology and rubber plant waste disposal.

Download or read book Engineered Rubber Products written by John G. Sommer and published by Hanser Gardner Publications. This book was released on 2009 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book covers the engineering of rubber products"--Provided by publisher.

Download or read book The Complete Book on Rubber Processing and Compounding Technology with Machinery Details 2nd Revised Edition written by NIIR Board of Consultants and Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2010-02-05 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of rubber and rubber products is a large and diverse industry. The rubber product manufacturing industry is basically divided into two major sectors: tyre and non-tyre. The tyre sector produces all types of automotive and nonautomotive tyres whereas the non-tyre sector produces high technology and sophisticated products like conveyor belts , rubber seals etc. The wide range of rubber products manufactured by the rubber industry comprises all types of heavy duty earth moving tyres, auto tyres, tubes, automobile parts, footwear, beltings etc. The rubber industry has been growing tremendously over the years. The future of the rubber industry is tied to the global economy. Rapidly growing automotive sector in developing economies and increased demand for high-performance tyres are expected to contribute to the growth of the global industrial rubber market. The current scenario reveals that there is a tremendous scope for the development of rubber processing industries. The global market for industrial rubber products is projected to increase 5.8 % per year. Investment in rubber industry is expected to offer significant opportunities in the near future and realizing returns to investors willing to explore this sector. This book deals with all aspects of rubber processing; mixing, milling, extrusion and molding, reclaiming and manufacturing process of rubber products. The major contents of the book are rubbers materials and processing, mixing technology of rubber, techniques of vulcanization, rubber vulcanization, rubber compounding, rubber reclaiming, manufacture of rubber products, latex and foam rubber, silicone rubber, polybutadiene and polyisoprene, styrene butadiene rubber, rubber natural etc. The book contains addresses of plant & machinery suppliers with their Photographs. It will be a standard reference book for professionals, entrepreneurs, those studying and researching in this important area and others interested in the field of rubber processing technology. TAGS Basic compounding and processing of rubber, Best small and cottage scale industries, Business guidance for rubber processing, Business guidance for rubber compounding, Business guidance to clients, Business Plan for a Startup Business, Business plan on Rubber, Business start-up, How is rubber made?, How to Start a Rubber business?, How to Start a Rubber Production Business, How to start a successful Rubber Processing business, How to Start Rubber processing Business, How to Start Rubber Processing Industry in India, Manufacture of Rubber Products, Modern small and cottage scale industries, Most Profitable Rubber Processing Business Ideas, Natural Rubber Processing Line, Natural rubber processing method, Natural Rubber Processing, New small scale ideas in Rubber processing industry, Opportunities in Rubber industries for new business, Processing and Profiting from Rubber, Processing methods for rubber materials, Profitable Rubber Business Ideas Small Scale Manufacturing, Profitable small and cottage scale industries, Profitable Small Scale Rubber Manufacturing, Rubber and Rubber Products, Rubber based Industries processing, Rubber Based Small Scale Industries Projects, Rubber business plan, Rubber Chemistry, Rubber compounding, Rubber Compounding & Mixing, Rubber compounding ingredients, Rubber compounding method, Rubber compounding process, Rubber compounding technology, Rubber Extrusion, Rubber Materials, Rubber mixing process, Rubber Mixing, Rubber Principles, Rubber processing, Rubber Processing & Rubber Based Profitable Projects, Rubber Processing and Profiting, Rubber Processing Business, Rubber Processing Industry in India, Rubber processing methods, Rubber Processing Projects, Rubber processing technology, Rubber Products manufacturing, Rubber Products, Rubber Reclaiming, Rubber technology, Rubber Technology and Manufacturing Process of Rubber Products, Rubber Vulcanization, Rubbers: materials and processing technology, Setting up of Rubber Processing Units, Small scale manufacturing business in rubber industry, Small Scale Rubber Processing Projects, Small scale Rubber production line, Small Start-up Business Project, Start up India, Stand up India, Starting a Rubber Processing Business, Startup, Start-up Business Plan for Rubber Processing, Startup ideas, Startup Project, Startup Project for Rubber processing and compounding, Startup project plan, Steps in processing of rubber, Vulcanization of rubber, Vulcanization of rubber compounds, Vulcanized rubber properties, Rubber processing and compounding

Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. - Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties - Explores novel applications of natural rubber across a range of industries, including current and potential uses - Discusses resources and utilization, and considers sustainable future development of natural rubber

Download or read book Analyzing Friction in the Design of Rubber Products and Their Paired Surfaces written by Robert Horigan Smith and published by CRC Press. This book was released on 2008-03-24 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a mechanistic approach that emphasizes the physical behavior of rubber as it slides, Analyzing Friction in the Design of Rubber Products and Their Paired Surfaces integrates the engineering and scientific evidence demonstrating that the laws of metallic friction do not apply to rubber. The book also presents a newly developed, scienti

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book Failure of Plastics and Rubber Products written by D. Wright and published by iSmithers Rapra Publishing. This book was released on 2001-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics and rubbers together make up the most adaptable and varied class of materials available to product designers. They may be transparent or opaque, rigid or flexible, lightweight, insulating, and weatherproof. They are used in almost every industry, and in every part of the home. Applications range from the humble hot water bottle to the sheathing on a high voltage cable, and from a simple scrubbing brush to a tank for storing hydrochloric acid. Products may be disposable (e.g. packaging goods) or intended to last for decades, such as a buried sewage pipe. However, it is this very diversity which makes materials selection so difficult, and appropriate design so important. Indeed the one thing that all these particular products have in common is their presence in this book of failures. Failures due to degradation may result from exposure to the weather or an aggressive operating environment. Alternatively they may be caused by the introduction of an external agent unforeseen by the product designer. They may be rapid or very slow, and they may result from a combination of factors. In this book Dr. Wright describes the following mechanisms of polymer degradation, and then illustrates each failure mechanism with a number of case studies: Thermo-oxidation, Photo-oxidation, Degradation due to ionising radiation, Chemical attack, Environmental stress cracking, Other miscellaneous effects, including treeing, electrochemical degradation and biodegradation. Many of the case studies are based on Dr. Wrights own experiences whilst working at Rapra. In each case he describes the circumstances of the failure, and discusses both the consequences of the failure and the lessons that may be learned from it. Most of the failed products are familiar to us all, and his style is both readable and informative. Photographs are included where available. The book will be essential reading for designers, engineers, product specifiers and forensic engineers. Materials suppliers and processors will also benefit from the pragmatic analysis and advice it contains. It will also be of value to all students of polymer science and technology, providing an essential insight into the practical application of plastics and rubbers and the potential problems. Finally, it will be of interest to a much broader readership, including anyone who ever wondered why things break, and it should become a standard reference work in all technical libraries. This book was written with the support of the UK Department of Trade and Industry. It is intended to raise awareness of the causes and consequences of polymer product failures, in order to reduce the future incidences of such failures, and their considerable costs to industry

Download or read book Hand Book of Rubber Formulations written by Shrikant P. Athavale and published by Notion Press. This book was released on 2018-11-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The core content of this book is derived from the author’s experience as a Senior Technocrat, associated with the rubber industry in the aspects of Production, R&D and new plant erection and commissioning. This book is dedicated to a variety of Rubber Starting Point Formulations that could be very useful for the rubber industry. The rubber industry is an important resource-based industry in India. Over many decades, the rubber industry has witnessed steady and strong growth. Rubber can be processed in many ways to manufacture a wide range of products. This book provides the starting point formulations that cover the manufacturing processes of rubber products such as calendaring, extrusion and molding. Thus, the book is very useful for new entrepreneurs, existing units, technical institutions and technocrats. These formulations are based on General Compounding Principles and properties such as Tensile Strength, Tear Resistance, The Crescent Tear Test, The Hardness of Rubber, Abrasion Resistance, Flex Cracking Resistance, Resilience, Heat Build-up, and Temperature Resistance. The formulations are aimed at products like Retreading Materials, Conveyor Belting, Transmission Belting and Hose, Footwear, Rubber Roller, Medical Applications, O rings and Seals, Rubber Blends and Manufacture of Latex Products.

Download or read book Rubber Manufacturing in Malaysia written by Christopher C. Goldthorpe and published by . This book was released on 2015 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber to Rubber Adhesion written by Dinesh Kumar Kotnees and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: RUBBER TO RUBBER ADHESION Readers will get helpful ideas and in-depth knowledge about various aspects of rubber to rubber adhesion with particular reference to theory and practice. This book covers various aspects of rubber to rubber adhesion which is important theoretically, as well as having practical implications. Rubber is a polymer whose glass transition temperature is well below the room temperature and hence the chains are very mobile at room and higher temperatures, making the material very versatile. Rubber is used in a large number of applications ranging from underground mining to tire to space vehicles. In all these cases, compounded rubbers are used in laminates and joined. The higher the adhesion, the higher will be the joint strength. The principles taught in adhesion science and technology are extensively used to prepare better joints and more useful products. The book serves to satisfy a wide range of disciplines (polymers, materials, chemical, chemistry, mechanical, etc.) and starts with an introduction on rubber, then characterization of rubber, rubber surface and joints and, finally, other chapters on rubber to rubber adhesion. Scientific aspects to understand the technology are highlighted. It gives a comprehensive treatment on adhesion between unvulcanized elastomers, self-healing of elastomers, adhesion between compounded elastomers by co-crosslinking, adhesion between partially vulcanized compounded rubber and partially vulcanized compounded rubber, adhesion between vulcanized rubber and unvulcanized rubber- or partially vulcanized rubber, and adhesion between vulcanized rubber and vulcanized rubber. Audience The book will be used by academicians in polymer science, materials science, chemical and mechanical engineering, chemistry, R & D personnel, industry people, as well as rubber and adhesion practitioners.

Download or read book Rubber Processing written by Peter S. Johnson and published by Hanser Gardner Publications. This book was released on 2001 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Overview of Rubber Processing p. 1 1.1 Introduction p. 1 1.2 Testing p. 2 1.2.1 Raw Materials Quality Assurance p. 2 1.2.2 Processability Testing of Mixed Compounds p. 2 1.2.3 End Product Testing p. 3 1.3 Conclusion p. 3 References p. 4 2 Raw Materials Acceptance and Specifications p. 5 2.1 Introduction p. 5 2.2 Raw Materials Specifications p. 5 2.2.1 Elastomers p. 6 2.2.2 Fillers p. 7 3 Mixing of Rubber Compounds p. 9 3.1 Introduction p. 9 3.2 Material Flow to the Mixer p. 10 3.2.1 Receipt and Storage of Raw Materials p. 11 3.2.2 Feeding, Weighing, and Charging Raw Materials p. 12 3.2.2.1 Weighing Major Ingredients p. 14 3.2.2.2 Small Component Weighing p. 14 3.3 The Mixing Process p. 15 3.3.1 Incorporation p. 16 3.3.2 Dispersion p. 17 3.3.3 Distribution p. 19 3.3.4 Plasticization p. 20 3.3.5 Natural Rubber Mastication p. 20 3.3.6 Flow Visualization and Modeling of the Mixing Process p. 20 3.3.6.1 Flow Visualization p. 21 3.3.6.2 Modeling p. 21 3.3.7 Flow Behavior on Mills p. 24 3.4 Internal Mixers p. 26 3.4.1 Developments in Internal Mixers p. 29 3.4.1.1 Farrel Mixers p. 29 3.4.1.2 Kobelco Stewart Bolling Mixers p. 30 3.4.1.3 Krupp-Midwest Werner und Pfleiderer Mixers p. 31 3.4.1.4. Pomini Mixers p. 31 3.4.2 Choosing a Mixer p. 32 3.4.3 Inspection and Preventative Maintenance of Mixers p. 32 3.4.4 Internal Mixer Operation p. 33 3.4.4.1 Mixing Procedures p. 33 3.4.4.2 Temperature Control in Internal Mixers p. 37 3.4.4.3 Rotor Speed p. 37 3.4.4.4 Ram Pressure p. 38 3.4.4.5 Batch Size p. 38 3.4.4.6 Dump Criteria p. 40 3.4.5 Control of the Mixing Process p. 41 3.4.6 Scale-Up p. 41 3.5 Take-Off Systems p. 43 3.5.1 Dump Mills p. 43 3.5.2 Packaging p. 44 3.5.3 Single Pass Mixing p. 45 3.6 Other Mixing Equipment p. 45 3.6.1 Mill Mixing p. 45 3.6.2 Continuous Mixing p. 47 3.7 Custom Compounding p. 47 3.8 Troubleshooting the Mixing Process p. 48 3.8.1 Inadequate Dispersion or Distribution p. 49 3.8.2 Scorchy Compound p. 49 3.8.3 Contamination p. 49 3.8.4 Poor Handling on Dump Mill p. 49 3.8.5 Batch-to-Batch Variation p. 49 3.9 Concluding Comments p. 50 References p. 50 4 Flow Behavior of Compounds p. 53 4.1 Introduction p. 53 4.2 Fundamentals of Rheology p. 53 4.3 Effect of Compounding Ingredients on Processing Behavior p. 58 4.3.1 Elastomers p. 58 4.3.2 Fillers p. 59 4.3.2.1 Carbon Blacks p. 59 4.3.3 Plasticizers and Processing Aids p. 60 4.3.3.1 Plasticizers p. 61 4.3.3.2 Processing Aids p. 62 4.3.4 Elasticity p. 63 4.3.5 Conclusion p. 64 References p. 64 5 Testing of Compounds After Mixing p. 65 5.1 Introduction p. 65 5.2 Processability Test Instruments p. 68 5.2.1 The Mooney Viscometer p. 68 5.2.1.1 Delta Mooney p. 69 5.2.1.2 TMS Rheometer p. 70 5.2.2 Capillary Rheometers p. 80 5.2.3 Oscillating Disk Curemeters p. 73 5.2.4 Rotorless Curemeters p. 75 5.2.5 Dynamic Mechanical Rheological Testers p. 75 5.2.6 Stress Relaxation Instruments p. 75 5.2.7 ODR Cure Times Correlation with MDR p. 77 5.3 Comparison of Alpha Technologies Processability Test Instruments p. 78 5.4 Conclusion p. 80 References p. 80 6 The Curing Process p. 83 6.1 Introduction p. 84 6.2 Scorch or Premature Vulcanization p. 84 References p. 85 7 Calendering of Rubber p. 87 7.1 Introduction p. 87 7.2 Equipment p. 87 7.3 Processes p. 88 7.3.1 Feeding p. 88 7.3.2 Sheeting p. 88 7.3.3 Frictioning p. 88 7.3.4 Coating p. 89 7.3.5 Roller Dies p. 89 7.3.6 Downstream Processes p. 90 7.4 Modeling the Calendering Process p. 90 7.5 Troubleshooting Problems in Calendering p. 91 7.5.1 Scorch p. 91 7.5.2 Blistering p. 91 7.5.3 Rough or Holed Sheet p. 91 7.5.4 Tack p. 91 7.5.5 Bloom p. 91 7.6 Conclusions p. 91 References p. 92 8 Extrusion of Rubber p. 93 8.1 Introduction p. 93 8.2 Feeding p. 93 8.2.1 Cold-Feed versus Hot-Feed Extruders p. 94 8.3 Mass Transfer, Conveying, or Pumping p. 96 8.3.1 Flow Mechanism p. 97 8.3.2 Extruder Designs p. 98 8.3.2.1 The Maillefer Screw p. 99 8.3.2.2 The Iddon Screw p. 100 8.3.2.3 The Transfermix p. 101 8.3.2.4 The EVK Screw p. 101 8.3.2.5 The Pin Barrel Extruder p. 101 8.3.2.6 The Cavity Transfer Mixer p. 102 8.3.2.7 Vented Extruders p. 104 8.3.2.8 Dump Extruders p. 104 8.3.2.9 Strainers p. 105 8.3.2.10 Extruder Barrels p. 105 8.4 Extruder Operation and Control p. 105 8.5 Shaping p. 108 8.5.1 Extruder Heads p. 108 8.5.1.1 Coextrusion p. 109 8.5.1.2 Crossheading p. 109 8.5.1.3 Shear Heads p. 109 8.5.2 Dies p. 111 8.5.2.1 Pressure Drop p. 111 8.5.2.2 Die Swell p. 111 8.6 Take-Off and Curing p. 112 8.6.1 Continuous Vulcanization Systems p. 113 8.6.1.1 Pressurized Steam Systems p. 113 8.6.1.2 Hot Air Curing Systems p. 113 8.6.1.3 Hot Air Fluidized Bed Systems p. 114 8.6.1.4 Liquid Salt Bath Systems p. 114 8.6.1.5 Microwave Systems p. 114 8.6.1.6 Shear Head Systems p. 115 8.6.1.7 Electron Beam Systems p. 115 8.6.1.8 Steel Belt Presses p. 116 8.6.1.9 Ultrasonic Vulcanization p. 116 8.7 Troubleshooting the Extrusion Process p. 116 8.7.1 Low Output Rate p. 116 8.7.2 Poor Dimensional Stability of Extrudate p. 117 8.7.3 Excessive Heat Buildup in Compound p. 117 8.7.4 Rough Surface on Extrudate p. 117 8.7.5 Contamination p. 117 8.7.6 Porosity in Extrudate p. 117 8.7.7 Strip Difficult to Feed p. 117 8.7.8 Surging Output p. 118 8.8 Concluding Comments p. 118 References p. 118 9 Molding of Rubber p. 119 9.1 Introduction p. 119 9.2 Compression and Transfer Molding p. 120 9.3 Injection Molding of Rubber p. 122 9.3.1 Injection Molding Equipment p. 125 9.3.1.1 Delivery Systems p. 125 9.3.1.2 Nozzles, Runners, and Gates p. 127 9.3.1.3 Molds p. 128 9.3.1.4 Automatic Ejection p. 129 9.3.1.5 Deflashing p. 129 9.3.2 The Injection Molding Process p. 130 9.3.2.1 Injection Temperature p. 130 9.3.2.2 Screw Speed p. 131 9.3.2.3 Back Pressure p. 131 9.3.2.4 Injection Pressure p. 131 9.3.2.5 Summary p. 131 9.3.3 Monitoring and Modeling the Injection Molding Process p. 131 9.3.4 Control of the Injection Molding Process p. 132 9.3.5 Compounds for Injection Molding p. 133 9.3.6 Problems in Injection Molding of Rubber p. 133 References p. 136 10 Finished Product Testing p. 137 10.1 Introduction p. 137 10.2 Test of Filler Distribution and Dispersion p. 138 10.2.1 Microscopy p. 138 10.2.2 Surface Roughness p. 138 10.3 Tests on Cured Specimens p. 138 10.3.1 Tensile Tests p. 139 10.3.2 Hardness p. 139 10.3.3 Compression Set p. 139 10.3.4 Solvent Resistance p. 140 10.3.5 Aging p. 140 10.3.6 Ozone Cracking p. 140 References p. 140 Index p. 143.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.

Download or read book The Rise and Fall of the Amazon Rubber Industry written by Stephen Nugent and published by Routledge. This book was released on 2017-12-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this engaging book, Stephen Nugent offers an in-depth historical anthropology of a widely recognised feature of the Amazon region, examining the dramatic rise and fall of the rubber industry. He considers rubber in the Amazon from the perspective of a long-term extractive industry that linked remote forest tappers to technical innovations central to the industrial transformation of Europe and North America, emphasizing the links between the social landscape of Amazonia and the global economy. Through a critical examination focused on the rubber industry, Nugent addresses myths that continue to influence perceptions of Amazonia. The book challenges widely held assumptions about the hyper-naturalism of the ‘lost world’ of the Amazon where ‘the challenge of the tropics’ is still to be faced and the ‘frontiers of development’ are still to be settled. It is relevant for students and scholars of anthropology, Latin American studies, history, political ecology, geography and development studies.

Download or read book Seals and Sealing Handbook written by Robert K. Flitney and published by Elsevier. This book was released on 2014-06-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seals and Sealing Handbook, Sixth Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices.Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failure Guide', the factors to consider should anything go wrong. Building on the practical, stepped approach of its predecessor, Seals and Sealing Handbook, 6th Edition remains an essential reference for any engineer or designer who uses seals in their work. - A comprehensive reference covering a broad range of seal types for all situations, to ensure that you are able to select the most appropriate seal for any given task - Includes supporting case studies and a unique 'Failure Guide' to help you troubleshoot if things go wrong - New edition includes the most up-to-date information on sealing technology, making it an essential reference for anyone who uses seals in their work