Download or read book RTL Power Estimation of Sequential Circuits written by Sridhar Muthrasanallur and published by . This book was released on 1998 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timing Analysis and Optimization of Sequential Circuits written by Naresh Maheshwari and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen rapid strides in the level of sophistication of VLSI circuits. On the performance front, there is a vital need for techniques to design fast, low-power chips with minimum area for increasingly complex systems, while on the economic side there is the vastly increased pressure of time-to-market. These pressures have made the use of CAD tools mandatory in designing complex systems. Timing Analysis and Optimization of Sequential Circuits describes CAD algorithms for analyzing and optimizing the timing behavior of sequential circuits with special reference to performance parameters such as power and area. A unified approach to performance analysis and optimization of sequential circuits is presented. The state of the art in timing analysis and optimization techniques is described for circuits using edge-triggered or level-sensitive memory elements. Specific emphasis is placed on two methods that are true sequential timing optimizations techniques: retiming and clock skew optimization. Timing Analysis and Optimization of Sequential Circuits covers the following topics: Algorithms for sequential timing analysis Fast algorithms for clock skew optimization and their applications Efficient techniques for retiming large sequential circuits Coupling sequential and combinational optimizations. Timing Analysis and Optimization of Sequential Circuits is written for graduate students, researchers and professionals in the area of CAD for VLSI and VLSI circuit design.
Download or read book Low Power Design with High Level Power Estimation and Power Aware Synthesis written by Sumit Ahuja and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel research techniques, algorithms, methodologies and experimental results for high level power estimation and power aware high-level synthesis. Readers will learn to apply such techniques to enable design flows resulting in shorter time to market and successful low power ASIC/FPGA design.
Download or read book Integrated Circuit Design Power and Timing Modeling Optimization and Simulation written by Dimitrios Soudris and published by Springer. This book was released on 2003-06-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2000, held in Göttingen, Germany in September 2000. The 33 revised full papers presented were carefully reviewed and selected for inclusion in the book. The papers are organized in sections on RTL power modeling, power estimation and optimization, system-level design, transistor level design, asynchronous circuit design, power efficient technologies, design of multimedia processing applications, adiabatic design and arithmetic modules, and analog-digital circuit modeling.
Download or read book Computer Aided Design Techniques for Low Power Sequential Logic Circuits written by Jose Monteiro and published by . This book was released on 1996-11-01 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Intelligence in Digital and Network Designs and Applications written by Mourad Fakhfakh and published by Springer. This book was released on 2015-07-14 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the application of recent advances in computational intelligence – algorithms, design methodologies, and synthesis techniques – to the design of integrated circuits and systems. It highlights new biasing and sizing approaches and optimization techniques and their application to the design of high-performance digital, VLSI, radio-frequency, and mixed-signal circuits and systems. This second of two related volumes addresses digital and network designs and applications, with 12 chapters grouped into parts on digital circuit design, network optimization, and applications. It will be of interest to practitioners and researchers in computer science and electronics engineering engaged with the design of electronic circuits.
Download or read book Decision Diagram Techniques for Micro and Nanoelectronic Design Handbook written by Svetlana N. Yanushkevich and published by CRC Press. This book was released on 2018-10-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision diagram (DD) techniques are very popular in the electronic design automation (EDA) of integrated circuits, and for good reason. They can accurately simulate logic design, can show where to make reductions in complexity, and can be easily modified to model different scenarios. Presenting DD techniques from an applied perspective, Decision Diagram Techniques for Micro- and Nanoelectronic Design Handbook provides a comprehensive, up-to-date collection of DD techniques. Experts with more than forty years of combined experience in both industrial and academic settings demonstrate how to apply the techniques to full advantage with more than 400 examples and illustrations. Beginning with the fundamental theory, data structures, and logic underlying DD techniques, they explore a breadth of topics from arithmetic and word-level representations to spectral techniques and event-driven analysis. The book also includes abundant references to more detailed information and additional applications. Decision Diagram Techniques for Micro- and Nanoelectronic Design Handbook collects the theory, methods, and practical knowledge necessary to design more advanced circuits and places it at your fingertips in a single, concise reference.
Download or read book Advances in Neural Networks ISNN 2006 written by Jun Wang and published by Springer. This book was released on 2006-05-11 with total page 1429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Volume III of a three volume set constituting the refereed proceedings of the Third International Symposium on Neural Networks, ISNN 2006. 616 revised papers are organized in topical sections on neurobiological analysis, theoretical analysis, neurodynamic optimization, learning algorithms, model design, kernel methods, data preprocessing, pattern classification, computer vision, image and signal processing, system modeling, robotic systems, transportation systems, communication networks, information security, fault detection, financial analysis, bioinformatics, biomedical and industrial applications, and more.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Lars Svensson and published by Springer Science & Business Media. This book was released on 2009-02-13 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of 18th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2008, featuring Integrated Circuit and System Design, held in Lisbon, Portugal during September 10-12, 2008. The 31 revised full papers and 10 revised poster papers presented together with 3 invited talks and 4 papers from a special session on reconfigurable architectures were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on low-leakage and subthreshold circuits, low-power methods and models, arithmetic and memories, variability and statistical timing, synchronization and interconnect, power supplies and switching noise, low-power circuits; reconfigurable architectures, circuits and methods, power and delay modeling, as well as power optimizations addressing reconfigurable architectures.
Download or read book From ASICs to SOCs written by Farzad Nekoogar and published by Prentice Hall Professional. This book was released on 2003 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: From ASICs to SOCs: A Practical Approach, by Farzad Nekoogar and Faranak Nekoogar, covers the techniques, principles, and everyday realities of designing ASICs and SOCs. Material includes current issues in the field, front-end and back-end designs, integration of IPs on SOC designs, and low-power design techniques and methodologies. Appropriate for practicing chip designers as well as graduate students in electrical engineering.
Download or read book Computer Aided Design Techniques for Low Power Sequential Logic Circuits written by José Monteiro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid increases in chip complexity, increasingly faster clocks, and the proliferation of portable devices have combined to make power dissipation an important design parameter. The power consumption of a digital system determines its heat dissipation as well as battery life. For some systems, power has become the most critical design constraint. Computer-Aided Design Techniques for Low Power Sequential Logic Circuits presents a methodology for low power design. The authors first present a survey of techniques for estimating the average power dissipation of a logic circuit. At the logic level, power dissipation is directly related to average switching activity. A symbolic simulation method that accurately computes the average switching activity in logic circuits is then described. This method is extended to handle sequential logic circuits by modeling correlation in time and by calculating the probabilities of present state lines. Computer-Aided Design Techniques for Low Power Sequential Logic Circuits then presents a survey of methods to optimize logic circuits for low power dissipation which target reduced switching activity. A method to retime a sequential logic circuit where registers are repositioned such that the overall glitching in the circuit is minimized is also described. The authors then detail a powerful optimization method that is based on selectively precomputing the output logic values of a circuit one clock cycle before they are required, and using the precomputed value to reduce internal switching activity in the succeeding clock cycle. Presented next is a survey of methods that reduce switching activity in circuits described at the register-transfer and behavioral levels. Also described is a scheduling algorithm that reduces power dissipation by maximising the inactivity period of the modules in a given circuit. Computer-Aided Design Techniques for Low Power Sequential Logic Circuits concludes with a summary and directions for future research.
Download or read book Complete range Activity based RTL Power Estimation written by Nur Kurt-Karsilayan and published by . This book was released on 1998 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Power CMOS Circuits written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools addresses the design of low-power circuitry in deep submicron technologies. It provides a focused reference for specialists involved in designing low-power circuitry, from transistors to logic gates. The book is organized into three broad sections for convenient access. The first examines the history of low-power electronics along with a look at emerging and possible future technologies. It also considers other technologies, such as nanotechnologies and optical chips, that may be useful in designing integrated circuits. The second part explains the techniques used to reduce power consumption at low levels. These include clock gating, leakage reduction, interconnecting and communication on chips, and adiabatic circuits. The final section discusses various CAD tools for designing low-power circuits. This section includes three chapters that demonstrate the tools and low-power design issues at three major companies that produce logic synthesizers. Providing detailed examinations contributed by leading experts, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools supplies authoritative information on how to design and model for high performance with low power consumption in modern integrated circuits. It is a must-read for anyone designing modern computers or embedded systems.
Download or read book Proceedings of the ACM Great Lakes Symposium on VLSI written by and published by . This book was released on 2007 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Analysis Attacks written by Stefan Mangard and published by Springer Science & Business Media. This book was released on 2008-01-03 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power analysis attacks allow the extraction of secret information from smart cards. Smart cards are used in many applications including banking, mobile communications, pay TV, and electronic signatures. In all these applications, the security of the smart cards is of crucial importance. Power Analysis Attacks: Revealing the Secrets of Smart Cards is the first comprehensive treatment of power analysis attacks and countermeasures. Based on the principle that the only way to defend against power analysis attacks is to understand them, this book explains how power analysis attacks work. Using many examples, it discusses simple and differential power analysis as well as advanced techniques like template attacks. Furthermore, the authors provide an extensive discussion of countermeasures like shuffling, masking, and DPA-resistant logic styles. By analyzing the pros and cons of the different countermeasures, this volume allows practitioners to decide how to protect smart cards.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Jorge Juan Chico and published by Springer Science & Business Media. This book was released on 2003-09-03 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2003, held in Torino, Italy in September 2003. The 43 revised full papers and 18 revised poster papers presented together with three keynote contributions were carefully reviewed and selected from 85 submissions. The papers are organized in topical sections on gate-level modeling and characterization, interconnect modeling and optimization, asynchronous techniques, RTL power modeling and memory optimization, high-level modeling, power-efficient technologies and designs, communication modeling and design, and low-power issues in processors and multimedia.
Download or read book Low Power High Level Synthesis for Nanoscale CMOS Circuits written by Saraju P. Mohanty and published by Springer Science & Business Media. This book was released on 2008-05-31 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained book addresses the need for analysis, characterization, estimation, and optimization of the various forms of power dissipation in the presence of process variations of nano-CMOS technologies. The authors show very large-scale integration (VLSI) researchers and engineers how to minimize the different types of power consumption of digital circuits. The material deals primarily with high-level (architectural or behavioral) energy dissipation.
