Download or read book RTCA Inc Document RTCA DO 254 Design Assurance Guidance for Airborne Electronic Hardware written by United States. Federal Aviation Administration and published by . This book was released on 2005 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Airborne Electronic Hardware Design Assurance written by Randall Fulton and published by CRC Press. This book was released on 2017-08-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a Federal Aviation Administration (FAA) consultant designated engineering representative (DER) and an electronics hardware design engineer who together taught the DO-254 class at the Radio Technical Commission for Aeronautics, Inc. (RTCA) in Washington, District of Columbia, USA, Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 is a testimony to the lessons learned and wisdom gained from many years of first-hand experience in the design, verification, and approval of airborne electronic hardware. This practical guide to the use of RTCA/DO-254 in the development of airborne electronic hardware for safety critical airborne applications: Describes how to optimize engineering processes and practices to harmonize with DO-254 Addresses the single most problematic aspect of engineering and compliance to DO-254—poorly written requirements Includes a tutorial on how to write requirements that will minimize the cost and effort of electronic design and verification Discusses the common pitfalls encountered by practitioners of DO-254, along with how those pitfalls occur and what can be done about them Settles the ongoing debate and misconceptions about the true definition of a derived requirement Promotes embracing DO-254 as the best means to achieve compliance to it, as well as the best path to high-quality electronic hardware Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 offers real-world insight into RTCA/DO-254 and how its objectives can be satisfied. It provides engineers with valuable information that can be applied to any project to make compliance to DO-254 as easy and problem-free as possible.
Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 1185 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.
Download or read book Aircraft System Safety written by Duane Kritzinger and published by Woodhead Publishing. This book was released on 2016-09-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft System Safety: Assessments for Initial Airworthiness Certification presents a practical guide for the novice safety practitioner in the more specific area of assessing aircraft system failures to show compliance to regulations such as FAR25.1302 and 1309. A case study and safety strategy beginning in chapter two shows the reader how to bring safety assessment together in a logical and efficient manner. Written to supplement (not replace) the content of the advisory material to these regulations (e.g. AMC25.1309) as well as the main supporting reference standards (e.g. SAE ARP 4761, RTCA/DO-178, RTCA/DO-154), this book strives to amalgamate all these different documents into a consolidated strategy with simple process maps to aid in their understanding and optimise their efficient use. Covers the effect of design, manufacturing, and maintenance errors and the effects of common component errors Evaluates the malfunctioning of multiple aircraft components and the interaction which various aircraft systems have on the ability of the aircraft to continue safe flight and landing Presents and defines a case study (an aircraft modification program) and a safety strategy in the second chapter, after which each of the following chapters will explore the theory of the technique required and then apply the theory to the case study
Download or read book Advances in Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear system is relatively unique on board an aircraft—it is both structure and machine, supporting the aircraft on the ground, yet providing functions such as energy absorption during landing, retraction, steering, and braking. Advances in Aircraft Landing Gear is a collection of eleven hand-picked technical papers focusing on the significant advancements that have occurred in this field concerning numeric modeling, electric actuation, and composite materials. Additionally, papers discussing self-powered landing gear and more electrical overall aircraft architectures have been included. The content of Advances in Aircraft Landing Gear is divided into two sections: Analysis and Design Methods; and Electric Actuation, Control, and Taxi. For those looking for more information on aircraft landing gears, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by this committee appears in the appendix.
Download or read book Digital Avionics Handbook Third Edition written by Cary Spitzer and published by CRC Press. This book was released on 2014-09-03 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.
Download or read book Civil Aircraft Electrical Power System Safety Assessment written by Peng Wang and published by Butterworth-Heinemann. This book was released on 2017-06-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Aircraft Electrical Power System Safety Assessment: Issues and Practices provides guidelines and methods for conducting a safety assessment process on civil airborne systems and equipment. As civil aircraft electrical systems become more complicated, electrical wiring failures have become a huge concern in industry and government—especially on aging platforms. There have been several accidents (most recently battery problems on the Boeing 777) with some of these having a relationship to wiring and power generation. Featuring a case study on the continuous safety assessment process of the civil airborne electrical power system, this book addresses problems, issues and troubleshooting techniques such as single event effects (SEE), the failure effects of electrical wiring interconnection systems (EWIS), formal theories and safety analysis methods in civil aircrafts. Introduces how to conduct assignment of development assurance levels for the electrical power system Includes safety assessments of aging platforms and their respective Electrical Wiring Interconnection System (EWIS) Features material on failure mechanisms for wiring systems and discussion of Failure Modes and Effects Analysis (FMEA) sustainment
Download or read book Mission Critical and Safety Critical Systems Handbook written by Kim Fowler and published by Newnes. This book was released on 2009-11-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a consolidated, comprehensive information resource for engineers working with mission and safety critical systems. Principles, regulations, and processes common to all critical design projects are introduced in the opening chapters. Expert contributors then offer development models, process templates, and documentation guidelines from their own core critical applications fields: medical, aerospace, and military. Readers will gain in-depth knowledge of how to avoid common pitfalls and meet even the strictest certification standards. Particular emphasis is placed on best practices, design tradeoffs, and testing procedures. *Comprehensive coverage of all key concerns for designers of critical systems including standards compliance, verification and validation, and design tradeoffs *Real-world case studies contained within these pages provide insight from experience
Download or read book Dependable Computing written by Carlos Alberto Maziero and published by Springer Science & Business Media. This book was released on 2005-10-11 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second Latin-American Symposium on Dependable Computing, LADC 2005, held in Salvador, Brazil, in October 2005. The 16 revised full papers presented together with 3 invited talks, and outlines of 2 workshops and 3 tutorials, were carefully reviewed and selected from 39 submissions. The papers are organized in topical sections on evaluation, certification, modelling, embedded systems, time, and distributed systems algorithms.
Download or read book Advances in Microelectronics Reviews Vol 1 written by Sergey Yurish and published by Lulu.com. This book was released on 2018-01-12 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st volume of 'Advances in Microelectronics: Reviews' Book Series contains 19 chapters written by 72 authors from academia and industry from 16 countries. With unique combination of information in each volume, the 'Advances in Microelectronics: Reviews' Book Series will be of value for scientists and engineers in industry and at universities. In order to offer a fast and easy reading of the state of the art of each topic, every chapter in this book is independent and self-contained. All chapters have the same structure: first an introduction to specific topic under study; second particular field description including sensing applications. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
Download or read book Applied Embedded Electronics written by Jerry Twomey and published by "O'Reilly Media, Inc.". This book was released on 2023-11-14 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded controller electronics are at the heart of virtually all modern electronic devices today with a market of more than $86 billion per year and growing. To serve the needs of designers creating products for this huge market, this practical book covers topics crucial for modern electronics design. Author Jerry Twomey examines the methods necessary to help you create a trouble-free integrated system for your product, with an emphasis on hardware design. You'll explore topics from the perspective of real-world applications, including discussions about non-ideal components, noise, and methods for avoiding problematic scenarios. Topics include: Ideal versus actual connections, components, digital, signals Architecting an embedded system Digital interface selection by application, speed, distance Multivoltage power supplies High frequency power integrity Battery and charging systems EMI reduction and ESD protection Driving and sensing peripherals Digital feedback control Optimization of power consumption and cost Specialty systems: medical, industrial, aerospace PCB design including manufacturability, yield, and low noise This book guides you through all of the techniques listed, which are required for a reliable integrated system. Through extensive illustrations and minimal equations, anyone with an interest in electronics will quickly grasp the ideas discussed.
Download or read book Systems Engineering for Commercial Aircraft written by Scott Jackson and published by Ashgate Publishing, Ltd.. This book was released on 2015-03-28 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key principle of systems engineering is that an aircraft should be considered as a whole and not as a collection of parts. Another principle is that the requirements for the aircraft and its subsystems emanate from a logical set of organized functions and from economic or customer-oriented requirements as well as the regulatory requirements for certification. The resulting process promises to synthesize and validate the design of aircraft which are higher in quality, better meet customer requirements and are most economical to operate. This book is more of a how and a why guide rather than a what guide. It stresses systems engineering is an integrated technical-managerial process that can be adapted without sacrificing quality in which risk handling and management is a major part. It explains that the systems view applies to both the aircraft and the entire air transport system. The book emphasizes that system engineering is not an added layer of processes on top of the existing design processes; it is the glue that holds all the other processes together. The readership includes the aircraft industry, suppliers and regulatory communities, especially technical, program and procurement managers; systems, design and specialty engineers (human factors, reliability, safety, etc.); students of aeronautical and systems engineering and technical management; and government agencies such as FAA and JAA.
Download or read book Applications of statistical methods and machine learning in the space sciences written by Bala Poduval and published by Frontiers Media SA. This book was released on 2023-04-12 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effective Model Based Systems Engineering written by John M. Borky and published by Springer. This book was released on 2018-09-08 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a proven, mature Model-Based Systems Engineering (MBSE) methodology that has delivered success in a wide range of system and enterprise programs. The authors introduce MBSE as the state of the practice in the vital Systems Engineering discipline that manages complexity and integrates technologies and design approaches to achieve effective, affordable, and balanced system solutions to the needs of a customer organization and its personnel. The book begins with a summary of the background and nature of MBSE. It summarizes the theory behind Object-Oriented Design applied to complex system architectures. It then walks through the phases of the MBSE methodology, using system examples to illustrate key points. Subsequent chapters broaden the application of MBSE in Service-Oriented Architectures (SOA), real-time systems, cybersecurity, networked enterprises, system simulations, and prototyping. The vital subject of system and architecture governance completes the discussion. The book features exercises at the end of each chapter intended to help readers/students focus on key points, as well as extensive appendices that furnish additional detail in particular areas. The self-contained text is ideal for students in a range of courses in systems architecture and MBSE as well as for practitioners seeking a highly practical presentation of MBSE principles and techniques.
Download or read book Computer Safety Reliability and Security written by Frank Ortmeier and published by Springer. This book was released on 2012-09-07 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 31st International Conference on Computer Safety, Reliability, and Security, SAFECOMP 2012, held in Magdeburg, Germany, in September 2012. The 33 revised full papers presented were carefully reviewed and selected from more than 70 submissions. The papers are organized in topical sections on tools, risk analysis, testing, quantitative analysis, security, formal methods, aeronautic, automotive, and process. Also included are 4 case studies.
Download or read book Developing Safety Critical Software written by Leanna Rierson and published by CRC Press. This book was released on 2017-12-19 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount of software used in safety-critical systems is increasing at a rapid rate. At the same time, software technology is changing, projects are pressed to develop software faster and more cheaply, and the software is being used in more critical ways. Developing Safety-Critical Software: A Practical Guide for Aviation Software and DO-178C Compliance equips you with the information you need to effectively and efficiently develop safety-critical, life-critical, and mission-critical software for aviation. The principles also apply to software for automotive, medical, nuclear, and other safety-critical domains. An international authority on safety-critical software, the author helped write DO-178C and the U.S. Federal Aviation Administration’s policy and guidance on safety-critical software. In this book, she draws on more than 20 years of experience as a certification authority, an avionics manufacturer, an aircraft integrator, and a software developer to present best practices, real-world examples, and concrete recommendations. The book includes: An overview of how software fits into the systems and safety processes Detailed examination of DO-178C and how to effectively apply the guidance Insight into the DO-178C-related documents on tool qualification (DO-330), model-based development (DO-331), object-oriented technology (DO-332), and formal methods (DO-333) Practical tips for the successful development of safety-critical software and certification Insightful coverage of some of the more challenging topics in safety-critical software development and verification, including real-time operating systems, partitioning, configuration data, software reuse, previously developed software, reverse engineering, and outsourcing and offshoring An invaluable reference for systems and software managers, developers, and quality assurance personnel, this book provides a wealth of information to help you develop, manage, and approve safety-critical software more confidently.
Download or read book Computer Safety Reliability and Security written by Andrea Bondavalli and published by Springer. This book was released on 2014-08-27 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of 6 workshops co-located with SAFECOMP 2014, the 33rd International Conference on Computer Safety, Reliability, and Security, held in Florence, Italy, in September 2014. The 32 revised full and 10 short papers presented were carefully reviewed and selected from 58 submissions. They are complemented with 6 introduction to each of the workshops: Architecting Safety in Collaborative Mobile Systems, ASCoMS'14; ERCIM/EWICS/ARTEMIS Workshop on Dependable Embedded and Cyberphysical Systems and Systems-of-Systems, DECSoS'14; DEvelopment, Verification and VAlidation of cRiTical Systems, DEVVARTS'14; Integration of Safety and Security Engineering, ISSE'14; Reliability and Security Aspects for Critical Infrastructure Protection, ReSA4CI'14; Next Generation of System Assurance Approaches for Safety-Critical Systems, SASSUR'14.
