Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.
Download or read book Vibration Analysis of Rotors written by Chong-Won Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is intended for use as an advanced course in either rotordynamics or vibration at the graduate level. This text has mostly grown out of the research work in my laboratory and the lectures given to graduate students in the Mechanical Engineering Department, KAIST. The text contains a variety of topics not normally found in rotordynamics or vibration textbooks. The text emphasizes the analytical aspects and is thus quite different from conventional rotordynamics texts; potential readers are expected to have a firm background in elementary rotordynamics and vibration. In most previously published rotordynamics texts, the behavior of simple rotors has been of a primary concern, while more realistic, multi-degree-f-freedom or continuous systems are seldom treated in a rigorous way, mostly due to the difficulty of a mathematical treatment of such complicated systems. When one wanted to gain a deep insight into dynamic phenomena of complicated rotor systems, one has, in the past, either had to rely on computational techniques, such as the transfer matrix and finite element methods, or cautiously to extend ideas learned from simple rotors whose analytical solutions are readily available. The former methods are limited in the interpretation of results, since the calculations relate only to the simulated case, not to more general system behavior. Ideas learned from simple rotors can, fortunately, often be extended to many practical rotor systems, but there is of course no guarantee of their validity.
Download or read book Flywheel Rotor Safe Life Technology Literature Search Summary written by and published by DIANE Publishing. This book was released on with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.
Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.
Download or read book Dynamics of Rotors and Foundations written by Erwin Krämer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotordynamics are of great importance in the design, manufacture and assembly of turbomachines as well as in ensuring their safe operation. Also important are the dynamics of the foundation and its interaction with the dynamics of the rotor. This book is divided into four parts. Following a presentation of the basic theory the dynamics of rotors supported on several bearings. The third part describes the dynamics of foundations of turbine line-outs and the calculations for a turbomachine coupled with its foundation. The last part includes a section on estimation procedures, a comprehensive presentation of the theoryand practice of rotors having a transverse crack, a section on the mathematical fundamentals and a description of the computer program used for the examples in the book. The book addresses both the practical engineer and the theoretician and should provide manufacturers, operators, university and polytechnic lecturers and students with an understanding of the vibrations of turbomachines. The results are described in such a way that they can be easily understood and applied.
Download or read book Dynamics of Rotors written by O. Mahrenholtz and published by Springer. This book was released on 2014-05-04 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Helicopter Rotors written by Ranjan Ganguli and published by Springer. This book was released on 2015-12-16 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploiting the properties of piezoelectric materials to minimize vibration in rotor-blade actuators, this book demonstrates the potential of smart helicopter rotors to achieve the smoothness of ride associated with jet-engined, fixed-wing aircraft. Vibration control is effected using the concepts of trailing-edge flaps and active-twist. The authors’ optimization-based approach shows the advantage of multiple trailing-edge flaps and algorithms for full-authority control of dual trailing-edge-flap actuators are presented. Hysteresis nonlinearity in piezoelectric stack actuators is highlighted and compensated by use of another algorithm. The idea of response surfaces provides for optimal placement of trailing-edge flaps. The concept of active twist involves the employment of piezoelectrically induced shear actuation in rotating beams. Shear is then demonstrated for a thin-walled aerofoil-section rotor blade under feedback-control vibration minimization. Active twist is shown to be significant in reducing vibration caused by dynamic stall. The exposition of ideas, materials and algorithms in this monograph is supported by extensive reporting of results from numerical simulations of smart helicopter rotors. This monograph will be a valuable source of reference for researchers and engineers with backgrounds in aerospace, mechanical and electrical engineering interested in smart materials and vibration control. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book The Self Induced Oscillations of Rotors written by Mikhail Y. Kushul and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase in operating speeds of mechanisms and machines during the last few decades has posed mechanical and technical engineers aseries of new problems. One of these is that of the investigation of the dynamics of flexible rotors operating at speeds greater than the first- and higher-order critical speeds. In con temporary machine design we must cope with various machines and assemblies containing shafts which operate under such conditions: turbogenerators. gas and steam turbines. spinning shafts. high-capacity pumps, and a multitude of special-purpose machines. One of the problems in the dynamics of flexible rotors-the passage through the resonance state-has re cently been almost completely solved in the work of Yu. A. Mitropol'skii. F. M. Dirnentberg, V. O. Kononenko. A. P. Fillippov. and others. Much less attention has been devoted to two other interrelated problems in the dynamics of high-speed rotors: the loss of stability in regime-combining forced vibrations due to imbalance in the supercritical region, along with self-induced or self-exc1ted vibrations. These problems are rapidly becoming more important as self-induced vibrations occurring at speeds beyond the critical speed are being met with more and more often in practice [1-3]. One of the main causes for the loss of stability of a rotor in the supercritical region. as was first estab lished by Kimball in [4] and Newkirk in [5] during the ninteen-twenties, is the force due to interna1 friction.
Download or read book Dynamics and Fault Diagnosis of Nonlinear Rotors and Impellers written by Jiazhong Zhang and published by Springer Nature. This book was released on 2022-04-28 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume presents recent developments in nonlinear dynamics applied to engineering. Specifically, the authors address stability and bifurcation in large-scale, complex rotor dynamic systems; periodic motions and their bifurcations in nonlinear circuit systems, fault diagnosis of complex engineering systems with nonlinear approaches, singularities in fluid-machinery and bifurcation analysis, nonlinear behaviors in rotor dynamic system with multi-mistuned blades, mode localization induced by mistuning in impellers with periodical and cyclic symmetry, and nonlinear behaviors in fluid-structure interaction and their control. These new results will maximize reader understand on the recent progress in nonlinear dynamics applied to large-scale, engineering systems in general and nonlinear rotors and impellers in particular.
Download or read book Certain Brake Drums and Rotors from China written by United States International Trade Commission and published by . This book was released on 1996 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Critical speed Analysis of Flexibly Mounted Rigid Rotors written by Richard H. Cavicchi and published by . This book was released on 1968 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cracked Rotors written by Nicoló Bachschmid and published by Springer Science & Business Media. This book was released on 2010-07-12 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cracks can develop in rotating shafts and can propagate to relevant depths without affecting consistently the normal operating conditions of the shaft. In order to avoid catastrophic failures, accurate vibration analyses have to be performed for crack detection. The identification of the crack location and depth is possible by means of a model based diagnostic approach, provided that the model of the crack and the model of the cracked shaft dynamical behavior are accurate and reliable. This monograph shows the typical dynamical behavior of cracked shafts and presents tests for detecting cracks. The book describes how to model cracks, how to simulate the dynamical behavior of cracked shaft, and compares the corresponding numerical with experimental results. All effects of cracks on the vibrations of rotating shafts are analyzed, and some results of a numerical sensitivity analysis of the vibrations to the presence and severity of the crack are shown. Finally the book describes some crack identification procedures and shows some results in model based crack identification in position and depth. The book is useful for higher university courses in mechanical and energetic engineering, but also for skilled technical people employed in power generation industries.
Download or read book An Incidence Loss Model for Wave Rotors with Axially Aligned Passages written by Daniel E. Paxson and published by . This book was released on 1998 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Helicopter Blade Dynamic Loads Measured During Performance Testing of Two Scaled Rotors written by John D. Berry and published by . This book was released on 1987 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: A test to determine the performance differences between the 27-percent-scale models of two rotors for the U.S. Army AH-64 helicopter was conducted in the Langley 14- by 22-Foot Subsonic Tunnel. One rotor, referred to as the baseline rotor, simulated the geometry and dynamic characteristics of the production baseline rotor, and the other rotor, referred to as the advanced rotor, was designed to have improved hover performance. During the performance test, the dynamic pitch-link forces and blade bending and torsion moments were also measured. Dynamic data from the forward flight investigation have been reduced and are presented herein. The advanced blade set was designed to have dynamic characteristics similar to those of the baseline rotor so that test conditions would not be limited by potential rotor instability and blade resonances and so that the measured performance increments could be considered to be due purely to aerodynamic causes. Data show consistent trends with advance ratio for both blade sets with generally higher oscillatory loads occurring for the advanced blade set when compared with the baseline blade set.
Download or read book Three Dimensional Flow in the Root Region of Wind Turbine Rotors written by Galih Bangga and published by kassel university press GmbH. This book was released on 2018-06-20 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in the analyses of three-dimensional flow over rotating wind turbine blades. Systematic studies for wind turbine rotors with different sizes were carried out numerically employing three different simulation approaches, namely the Euler, URANS and DDES methods. The main mechanisms of the lift augmentation in the blade inboard region are described in detail. The physical relations between the inviscid and viscous effects are presented and evaluated, emphasizing the influence of the flow curvature on the resulting pressure distributions. Detailed studies concerning the lift augmentation for large wind turbine rotors are considered as thick inboard airfoils characterized by massive separation are desired to stronger contribute to power production. Special attention is given to the analyses of wind turbine loads and flow field that can be helpful for the interpretation of the occurring physical phenomena. The book is aimed at students, researchers, engineers and physicists dealing with wind engineering problems, but also for a wider audience involved in flow computations.
Download or read book Jet boundary Corrections for Lifting Rotors Centered in Rectangular Wind Tunnels written by Harry H. Heyson and published by . This book was released on 1960 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
