Download or read book Rotational Moulding Cycle Time Reduction Through Exterior Mould Modification written by Mohamad Zaki Abdullah and published by . This book was released on 2005 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rotational Moulding of Plastics written by Roy James Crawford and published by Taylor & Francis Group. This book was released on 1996 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotational moulding has been available as a processing method for hollow plastic products for more than forty years, but for a long time it was regarded as a slow method limited to only a few plastics. Within the last ten to fifteen years there has been a dramatic change. Engineers and designers recognise the scope that rotational moulding offers for the production of relatively inexpensive, complex shapes with low levels of moulded-in stress. Materials suppliers are continually developing new grades of plastics as well as a wider selection of materials suited to the process. In addition, machinery suppliers are producing more sophisticated moulding equipment so that the moulder now has control over the process that was previously thought impossible. For its second edition, this book has been updated and expanded by the authors, who are leaders in their specialties within the field of rotational moulding. It continues to provide an introduction to the subject, as well as giving comprehensive coverage of the state-of-the-art. Two new chapters have been added. These cover the important areas of pin-hole removal from rotomoulded products and the rotational moulding of liquid polymers. In both cases the new material is the result of extensive research, and the results will be of considerable practical interest to moulders. The book will surely be welcomed again by moulders, materials and equipment suppliers, engineers and designers, and by lecturers looking for up-to-date information to include in their courses.

Download or read book Practical Guide to Rotational Moulding Second Edition written by Roy J Crawford and published by Smithers Rapra. This book was released on 2012-07-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotational moulding (also called rotomoulding or rotocasting), is a low pressure, high temperature manufacturing process that offers a very competitive alternative to blow moulding, thermoforming and injection moulding for the manufacture of hollow plastic parts. It offers designers the chance to produce relatively stress-free articles, with uniform wall thickness and potentially complex shapes. This second edition of the very popular Practical Guide to Rotational Moulding describes the basic aspects of the process and the latest state-of-the-art developments in the industry. It is completely revised and is extensively illustrated.This guide will be of interest both to students of polymer processing and those who work with rotational moulding equipment.

Download or read book The Reduction of Cycle Times in the Rotational Moulding of Plastics written by G. W. G. McDowell and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rotational Molding Technology written by R.J. Crawford and published by William Andrew. This book was released on 2001-12-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book clarifies and quantifies many of the technical interactions in the process. It distinguishes itself from other books on the subject by being a seamless story of the advanced aspects of the rotational molding process. There are seven chapters within the book. The US market for rotational molding products was one billion pounds in the year 2000. The growth of the rotational molding industry has grown at 10 to 15% per year. With this growth has come an increasing need for details on the complex, technical aspects of the process.

Download or read book Practical Guide to Rotational Moulding written by Roy J Crawford and published by Elsevier. This book was released on 2021-10-08 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Guide to Rotational Moulding, Third Edition, takes a step-by-step approach to rotomoulding, covering applications, moulds, machinery, materials, and design. This third edition has been thoroughly revised to include the latest advances, including novel materials and moulds, new products, and automation. The book begins with a chapter that introduces the rotational moulding process, analyses advantages and disadvantages, and explores common applications for rotomoulded products. The subsequent chapters provide detailed, methodical coverage of moulds, machinery, materials, and design for functionality, supported by clear illustrations and diagrams. Finally, challenges and future developments are discussed. This hands-on technical guide helps engineers, designers and practitioners to understand all aspects of rotomoulding, with the aim of producing performant end products and parts, with uniform wall thickness and potentially in complex shapes. The book is also of great interest to professionals across the plastics industry, as well as researchers and advanced students in plastics engineering, industrial design, mechanical engineering, chemical engineering, and materials science and engineering. Provides a strong fundamental understanding of all aspects of the rotational moulding process, from material to finished product Offers a highly practical combination of technical content and clear illustrations Covers the latest developments in rotomoulding, including novel materials and moulds, new products, and automated systems

Download or read book Rotational Molding Technology written by Roy J Crawford and published by William Andrew. This book was released on 2000-04-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book clarifies and quantifies many of the technical interactions in the process. It distinguishes itself from other books on the subject by being a seamless story of the advanced aspects of the rotational molding process. There are seven chapters within the book. The US market for rotational molding products was one billion pounds in the year 2000. The growth of the rotational molding industry has grown at 10 to 15% per year. With this growth has come an increasing need for details on the complex, technical aspects of the process.

Download or read book Rotational Molding written by Glenn Beall and published by Hanser Gardner Publications. This book was released on 1998 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: A highly versatile process, rotational molding allows for incredible design flexibility with the added benefit of low production costs. One of its advantages over other plastics processes is that one can mold more complex shapes with uniform wall thickness. This book provides an introduction to the design, materials, tooling, and process, and helps readers understand and apply the manufacturing techniques involved in rotational molding.

Download or read book Reducing Cycle Times in Rotational Moulding of Plastics written by R. M. Khouri and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by William Andrew. This book was released on 2007-08-11 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are few if any adequate guides to the properties, processing, and applications of thermoplastic elastomers, in spite the skyrocketing rise in the use of these materials. Until now. This new book sets the standard for a reference on these materials by compiling in one comprehensive volume an applicable knowledge of the chemistry, processing, and all properties, and uses of thermoplastic elastomers. Copiously illustrated and full of applicable processing and engineering data, this is the very definition of a ""definitive"" user's guide.

Download or read book Annual Technical Conference written by Society of Plastics Engineers. Technical Conference and published by . This book was released on 1978 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Virtual and Rapid Manufacturing written by Ljubomir Tanchev and published by CRC Press. This book was released on 2007-09-17 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key

Download or read book Engineering Design Handbook written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1996 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Improving Manufacturing Operations at Rubbermaid Cortland Mold change improvement program written by and published by . This book was released on 1995 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2011-07-20 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don’t teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb

Download or read book Total Quality Process Control for Injection Molding written by M. Joseph Gordon, Jr. and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales and marketing, then moving forward to cover finance, purchasing, design, tooling, manufacturing, assembly, decorating, and shipping, the book thoroughly covers each stage to illustrate how elevated standards across individual departments relate to result in the creation of a top-notch product. This Second Edition: Details ways to improve plastic part design and quality Includes material and process control procedures to monitor quality through the entire manufacturing system Offers detailed information on machinery and equipment and the implementation of quality assurance methods—content that is lacking in similar books Provides problem-analysis techniques and troubleshooting procedures Includes updates that cover Six Sigma, ISO 9000, and TS 16949, which are all critical for quality control; computer-guided process control techniques; and lean manufacturing methods With proven ways to problem-solve, increase performance, and ensure customer satis-faction, this valuable guide offers the vital information today's managers need to plan and implement quality process control—and produce plastic parts that not only meet, but surpass expectations.