Download or read book Machining of Ceramics and Composites written by Jahanmir and published by CRC Press. This book was released on 1999-01-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting modern advances in the machining of ceramics and composites, this work offers broadly based, fundamental information for selecting the appropriate machining processes and parameters, developing successful manufacturing strategies, and designing novel machining systems. It focuses on scientific and engineering developments affecting the present and future of machining processes.
Download or read book Rotary Ultrasonic Machining written by Marcel Kuruc and published by Springer Nature. This book was released on 2021-02-19 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the process and conditions of Rotary ultrasonic machining (RUM) of hard materials and summarizes the recommendation of proper machining parameters. The optimum conditions were applied for cutting edge preparation of CBN cutting inserts. The results presented in the book show that RUM is able to create controlled cutting edge preparation.
Download or read book Advances in Abrasive Based Machining and Finishing Processes written by S. Das and published by Springer Nature. This book was released on 2020-05-10 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the advances in abrasive based machining and finishing in broad sense. Specifically, the book covers the novel machining and finishing strategies implemented in various advanced machining processes for improving machining accuracy and overall quality of the product. This book presents the capability of advanced machining processes using abrasive grain. It also covers ways for enhancing the production rate as well as quality. It fulfills the gap between the production of any complicated components and successful machining with abrasive particles.
Download or read book Opportunities for Advanced Ceramics to Meet the Needs of the Industries of the Future written by Douglas W. Freitag and published by . This book was released on 1998 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.
Download or read book Developments in Ceramic Materials Research written by Dena Rosslere and published by Nova Publishers. This book was released on 2007 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics are refractory, inorganic, and non-metallic materials. They can be divided into two classes: traditional and advanced. Traditional ceramics include clay products, silicate glass and cement; while advanced ceramics consist of carbides (SiC), pure oxides (Al2O3), nitrides (Si3N4), non-silicate glasses and many others. Ceramics offer many advantages compared to other materials. They are harder and stiffer than steel; more heat and corrosion resistant than metals or polymers; less dense than most metals and their alloys; and their raw materials are both plentiful and inexpensive. Ceramic materials display a wide range of properties which facilitate their use in many different product areas. This new book presents leading-edge research in this field from around the world.
Download or read book Advances in Unconventional Machining and Composites written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-22 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Machining Technology for Composite Materials written by H Hocheng and published by Elsevier. This book was released on 2011-11-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials.The traditional methods of turning, drilling and grinding are discussed in part one, which also contains chapters analysing cutting forces, tool wear and surface quality. Part two covers non-traditional methods for machining composite materials, including electrical discharge and laser machining, among others. Finally, part three contains chapters that deal with special topics in machining processes for composite materials, such as cryogenic machining and processes for wood-based composites.With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. - Provides an extensive overview of machining methods for composite materials - Chapters analyse cutting forces, tool wear and surface quality - Cryogenic machining and processes for wood based composites are discussed
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Ceramic Materials and Components for Engines written by Jürgen G. Heinrich and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several ceramic parts have already proven their suitability for serial application in automobile engines in very impressive ways, especially in Japan, the USA and in Germany. However, there is still a lack of economical quality assurance concepts. Recently, a new generation of ceramic components, for the use in energy, transportation and environment systems, has been developed. The efforts are more and more system oriented in this field. The only possibility to manage this complex issue in the future will be interdisciplinary cooperation. Chemists, physicists, material scientists, process engineers, mechanical engineers and engine manufacturers will have to cooperate in a more intensive way than ever before. The R&D activities are still concentrating on gas turbines and reciprocating engines, but also on brakes, bearings, fuel cells, batteries, filters, membranes, sensors and actuators as well as on shaping and cutting tools for low expense machining of ceramic components. This book summarizes the scientific papers of the 7th International Symposium "Ceramic Materials and Components for Engines". Some of the most fascinating new applications of ceramic meterials in energy, transportation and environment systems are presented. The proceedings shall lead to new ideas for interdisciplinary activities in the future.
Download or read book Vibration Assisted Machining written by Lu Zheng and published by John Wiley & Sons. This book was released on 2021-02-16 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to comprehensively address the theory, kinematic modelling, numerical simulation and applications of vibration assisted machining Vibration Assisted Machining: Theory, Modelling and Applications covers all key aspects of vibration assisted machining, including cutting kinematics and dynamics, the effect of workpiece materials and wear of cutting tools. It also addresses practical applications for these techniques. Case studies provide detailed guidance on the design, modeling and testing of VAM systems. Experimental machining methods are also included, alongside considerations of state-of-the-art research developments on cutting force modeling and surface texture generation. Advances in computational modelling, surface metrology and manufacturing science over the past few decades have led to tremendous benefits for industry. This is the first comprehensive book dedicated to design, modelling, simulation and integration of vibration assisted machining system and processes, enabling wider industrial application of the technology. This book enables engineering students and professionals in manufacturing to understand and implement the latest vibration assisted machining techniques. Highlights include: Comprehensive coverage of the theory, kinematics modelling, numerical simulation and applications of vibration assisted machining (VAM) Case studies with detailed guidance on design, modelling and testing of VAM systems, as well as experimental machining methods Discussion of state-of-the-art research developments on cutting force modelling and surface texture generation Coverage of the history of VAM, its current applications and future directions for the technology Vibration Assisted Machining: Theory, Modelling and Applications provides engineering students, researchers, manufacturing engineers, production supervisors, tooling engineers, planning and application engineers and machine tool designers with the fundamentals of vibration assisted machining, along with methodologies for developing and implementing the technology to solve practical industry problems.
Download or read book Materials and Equipment Whitewares Refractory Ceramics Basic Science Volume 16 Issue 1 written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Tool and Manufacturing Engineers Handbook Plastic Part Manufacturing written by Philip Mitchell and published by Society of Manufacturing Engineers. This book was released on 1996-12-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.
Download or read book Advances in Manufacturing and Materials written by Ravinder Kumar and published by Springer Nature. This book was released on with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-26 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.
Download or read book Modern Manufacturing Systems written by Rajiv Kumar Garg and published by CRC Press. This book was released on 2022-12-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume explores recent research on advanced technologies and methods in production engineering, emphasizing effective overall process control and enhanced optimization. The authors include real-life case studies on advanced machining methods, traditional manufacturing technologies, advanced composite materials, processing with hybrid manufacturing techniques, various joining processes and their applications, micro-structure analysis, and more.
Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.
