Download or read book Rotary Mode Core Sampling Control Decision Record written by and published by . This book was released on 2001 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: A control decision meeting was held on December 19, 2000, to analyze the rotary mode core sampling (RMCS) controls. The agenda for the control decision meeting is included in Appendix A, and the attendee list is included in Appendix B. The purpose of this control decision meeting was to reconcile the Los Alamos National Laboratories safety assessment control allocation for RMCS with the rest of the Tank Farms Authorization Basis (AB). In-mid 1998, calculation note HNF-3228, Rev. 0, Recalculation of Accident Consequences to Account for Rotary Mode Core Sampling, was generated to incorporate RMCS into HNF-SD-WM-B10-001, Tank Waste Remediation System Basis for Interim Operation (BIO), which was the current AB at that time. The Addendum 5 addition to the BIO was based on calculation note HNF-3228 and issued for approval in August 1998. Approval of Addendum 5 has been delayed. Since Addendum 5 was generated, the BIO has been superceded by HNF-SD-WM-SAR-067, Tank Farms Final Safety Analysis Report (FSAR); numerous changes have been made to the accident analyses; and considerable data have been gathered on aerosol experience during RMCS. These changes necessitated an update to HNF-3228, Rev. 0, to provide a current evaluation of the impact of RMCS activities on the accident analyses in the FSAR before RMCS is incorporated into the FSAR. The scope of this control decision is for RMCS activities only. The AB documents used for this control decision were Revision 2 of the FSAR and Revision 2 of HNF-SD-WM-TSR-006, Tank Farms Technical Safety Requirements, as well as supporting calculation notes HNF-3228, Rev. 1, HNF-4240, Rev. 1, Organic Solvent Topical Report, and HNF-3588, Rev. 1, Organic Complexant Topical Report. The control decision meeting was conducted in accordance with the established and approved process and criteria described in the FSAR. A summary of the control decision process and criteria was presented at the start of the control decision meeting and is included in Appendix C. Control decisions were based on Addendum 5 of the BIO, on the best available information from the hazard and accident analyses, and on the technical expertise and experience of the meeting participants. Decisions were made by consensus. Section 2.0 of this report provides an overview of the control decision meeting presentations made on December 19, 2000. The presentations mainly described the existing hazards identified in Addendum 5 of the BIO. Section 3.0 of this report summarizes the control decision discussion at the December 19, 2000, meeting. The discussion summary identifies the controls that were considered and the reasons why specific controls were (or were not) selected. Section 4.0 of this report provides a listing of the references that are cited in the preceding sections.

Download or read book The Office of Environmental Management Technical Reports written by and published by . This book was released on 1997 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book System Design Specification for Rotary Mode Core Sample Trucks No 2 3 and 4 Programmable Logic Controller written by and published by . This book was released on 1995 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The system this document describes controls several functions of the Core Sample Truck(s) used to obtain nuclear waste samples from various underground storage tanks at Hanford. The system will monitor the sampling process and provide alarms and other feedback to insure the sampling process is performed within the prescribed operating envelope. The intended audience for this document is anyone associated with rotary or push mode core sampling. This document describes the Alarm and Control logic installed on Rotary Mode Core Sample Trucks (RMCST) {number_sign}2, 3, and 4. It is intended to define the particular requirements of the RMCST alarm and control operation (not defined elsewhere) sufficiently for detailed design to implement on a Programmable Logic Controller (PLC).

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System 3 written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System 4 written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rotary Mode Core Sample System Availability Improvement written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radioactive Waste Management written by and published by . This book was released on 1995-08 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Office of Environmental Management Technical Reports written by and published by . This book was released on 1997 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System number sign 4 written by and published by . This book was released on 1995 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 4. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 4 will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ''Rock Slinger'' test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System number sign 3 written by and published by . This book was released on 1995 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 3. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 3, will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ''Rock Slinger'' test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Download or read book Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System written by and published by . This book was released on 2000 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System, Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Download or read book INIS Atomindex written by and published by . This book was released on 1995 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standard Methods for the Examination of Water and Wastewater written by American Public Health Association and published by . This book was released on 1981 with total page 1254 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by WCB/McGraw-Hill. This book was released on 1998 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Flight Stability and Automatic Control presents an organized introduction to the useful and relevant topics necessary for a flight stability and controls course. Not only is this text presented at the appropriate mathematical level, it also features standard terminology and nomenclature, along with expanded coverage of classical control theory, autopilot designs, and modern control theory. Through the use of extensive examples, problems, and historical notes, author Robert Nelson develops a concise and vital text for aircraft flight stability and control or flight dynamics courses.

Download or read book The Naval Aviation Maintenance Program NAMP Maintenance data systems written by United States. Office of the Chief of Naval Operations and published by . This book was released on 1990 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: