Download or read book Rotary Mode Core Sampling Approved Checklist written by and published by . This book was released on 1999 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safety assessment for rotary mode core sampling was developed using certain bounding assumptions, however, those assumptions were not verified for each of the existing or potential flammable gas tanks. Therefore, a Flammable Gas/Rotary Mode Core Sampling Approved Checklist has been completed for tank 241-TX-116 prior to sampling operations. This transmittal documents the dispositions of the checklist items from the safety assessment.

Download or read book Rotary Mode Core Sampling Approved Checklist written by and published by . This book was released on 1998 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safety assessment for rotary mode core sampling was developed using certain bounding assumptions, however, those assumptions were not verified for each of the existing or potential flammable gas tanks. Therefore, a Flammable Gas/Rotary Mode Core Sampling Approved Checklist has been completed for tank 241-TX-113 prior to sampling operations. This transmittal documents the dispositions of the checklist items from the safety assessment.

Download or read book DOE 6430 1a Compliance Checklist for the Rotary Mode Core Sampling Exhauster Flammable Gas Interlock written by and published by . This book was released on 1995 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document examines the Safety Class I criteria in DOE 6430.1a and determines applicability to the rotary mode core sampling exhauster flammable gas interlock. Purpose of the interlock is to prevent the design basis accident of deflagration in single shell flammable gas watchlist tank.

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System 3 written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rotary Mode Core Sampling Service Trailer Acceptance Test Plan written by and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System 4 written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System number sign 4 written by and published by . This book was released on 1995 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 4. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 4 will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ''Rock Slinger'' test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Download or read book Operability Test Procedure for Rotary Mode Core Sampling System number sign 3 written by and published by . This book was released on 1995 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 3. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 3, will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ''Rock Slinger'' test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Download or read book Rotary Mode Core Sample System Availability Improvement written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radioactive Waste Management written by and published by . This book was released on 1981 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System written by and published by . This book was released on 2000 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System, Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.

Download or read book Engineering Task Plan for the Annual Revision of the Rotary Mode Core Sampling System Safety Equipment List written by and published by . This book was released on 1999 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Engineering Task Plan addresses an effort to provide an update to the RMCS Systems 3 and 4 SEL and DCM in order to incorporate the changes to the authorization basis implemented by HNF-SD-WM-BIO-001, Rev. 0 (Draft), Addendum 5, Safety Analysis for Rotary Mode Core Sampling. Responsibilities, task description, cost estimate, and schedule are presented.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rotary Mode Core Sampling Control Decision Record written by and published by . This book was released on 2001 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: A control decision meeting was held on December 19, 2000, to analyze the rotary mode core sampling (RMCS) controls. The agenda for the control decision meeting is included in Appendix A, and the attendee list is included in Appendix B. The purpose of this control decision meeting was to reconcile the Los Alamos National Laboratories safety assessment control allocation for RMCS with the rest of the Tank Farms Authorization Basis (AB). In-mid 1998, calculation note HNF-3228, Rev. 0, Recalculation of Accident Consequences to Account for Rotary Mode Core Sampling, was generated to incorporate RMCS into HNF-SD-WM-B10-001, Tank Waste Remediation System Basis for Interim Operation (BIO), which was the current AB at that time. The Addendum 5 addition to the BIO was based on calculation note HNF-3228 and issued for approval in August 1998. Approval of Addendum 5 has been delayed. Since Addendum 5 was generated, the BIO has been superceded by HNF-SD-WM-SAR-067, Tank Farms Final Safety Analysis Report (FSAR); numerous changes have been made to the accident analyses; and considerable data have been gathered on aerosol experience during RMCS. These changes necessitated an update to HNF-3228, Rev. 0, to provide a current evaluation of the impact of RMCS activities on the accident analyses in the FSAR before RMCS is incorporated into the FSAR. The scope of this control decision is for RMCS activities only. The AB documents used for this control decision were Revision 2 of the FSAR and Revision 2 of HNF-SD-WM-TSR-006, Tank Farms Technical Safety Requirements, as well as supporting calculation notes HNF-3228, Rev. 1, HNF-4240, Rev. 1, Organic Solvent Topical Report, and HNF-3588, Rev. 1, Organic Complexant Topical Report. The control decision meeting was conducted in accordance with the established and approved process and criteria described in the FSAR. A summary of the control decision process and criteria was presented at the start of the control decision meeting and is included in Appendix C. Control decisions were based on Addendum 5 of the BIO, on the best available information from the hazard and accident analyses, and on the technical expertise and experience of the meeting participants. Decisions were made by consensus. Section 2.0 of this report provides an overview of the control decision meeting presentations made on December 19, 2000. The presentations mainly described the existing hazards identified in Addendum 5 of the BIO. Section 3.0 of this report summarizes the control decision discussion at the December 19, 2000, meeting. The discussion summary identifies the controls that were considered and the reasons why specific controls were (or were not) selected. Section 4.0 of this report provides a listing of the references that are cited in the preceding sections.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Test Plan for Rotary Mode Core Sample Truck Grapple Hoist Level Wind System written by and published by . This book was released on 1999 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Grapple Hoist Assembly is currently used on the Rotary Mode Core Sampling Trucks (RMCSTs) to actuate the sampler and retrieve the pintle rod during sampling operations. The hoist assembly includes a driven drum approximately two inches wide and six inches in diameter that rotates to pay out or reel in the 5/32-in. cable The current Grapple Hoist Assembly, detailed on drawing H-2-690057, is prone to ''bird nesting'' the cable on the drum. ''Bird nesting'' is a condition in which the cable does not wind onto the drum in a uniformly layered manner, but winds in a random fashion where the cable essentially ''piles up'' inappropriately on the drum and, on some occasions, winds on the drum drive shaft. A system to help control this ''bird nesting'' problem has been designed as an addition to the existing components of the Grapple Hoist Assembly. The new design consists of a mechanism that is timed with, and driven by, the shaft that drives the drum. This mechanism traverses back and forth across the width of the drum to lay the cable on the drum in a uniformly layered manner. This test plan establishes the acceptance criteria, test procedure and test conditions It also describes the test apparatus necessary to verify the adequacy of the level wind system design. The test is defined as qualification testing (LMHC 1999b) and as such will be performed at conditions beyond the parameters that the Grapple Hoist Assembly is allowed to operate by the Safety Equipment List (SEL)(LMHC 1998).

Download or read book The Office of Environmental Management Technical Reports written by and published by . This book was released on 1997 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: