Download or read book Underbalanced Drilling Limits and Extremes written by Bill Rehm and published by Elsevier. This book was released on 2013-11-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology

Download or read book IADC Drilling Manual written by IADC Staff and published by . This book was released on 2014-12-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The IADC Drilling Manual, 12th edition, is the definitive manual for drilling operations, training, maintenance and troubleshooting. The two-volume, 26-chapter reference guide covers all aspects of drilling, with chapters on types of drilling rigs, automation, drill bits, casing and tubing, casing while drilling, cementing, chains and sprockets, directional drilling, downhole tools, drill string, drilling fluid processing, drilling fluids, hydraulics, drilling practices, floating drilling equipment and operations, high-pressure drilling hoses, lubrication, managed pressure drilling and related practices, power generation and distribution, pumps, rotating and pipehandling equipment, special operations, structures and land rig mobilization, well control equipment and procedures, and wire rope. A comprehensive glossary of drilling terms is also included. More than 900 color and black-and-white illustrations, 600 tables and thirteen videos. 1,158 pages. Copyright © IADC. All rights reserved.

Download or read book Sustainable Natural Gas Drilling written by David Wood and published by Elsevier. This book was released on 2024-03-13 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Natural Gas Drilling, the latest release in The Fundamentals and Sustainable Advances in Natural Gas Science and Engineering series, delivers many of the technical fundamentals needed in the natural gas industry with an additional sustainability lens. Introductory topics include underbalanced technologies, well integrity, and well trajectory. Advanced applications include utilizing nanoparticles to reduce environmental impact, and techniques to drill for underground gas storage and carbon capture operations. Supported by corporate and academic contributors along with two well-distinguished editors, Sustainable Natural Gas Drilling provides today's natural gas engineers the knowledge to adjust current drilling practices in a more environmentally sustainable way. - Accelerate emissions with case studies and visuals to illustrate how new principles can be applied in practical situations - Understand innovative advances that are leading to improved environmental performance - Bridge from theory to application with worldwide contributors representing academia and industry

Download or read book Fundamentals of Gas Shale Reservoirs written by Reza Rezaee and published by John Wiley & Sons. This book was released on 2015-07-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive information about the key exploration, development and optimization concepts required for gas shale reservoirs Includes statistics about gas shale resources and countries that have shale gas potential Addresses the challenges that oil and gas industries may confront for gas shale reservoir exploration and development Introduces petrophysical analysis, rock physics, geomechanics and passive seismic methods for gas shale plays Details shale gas environmental issues and challenges, economic consideration for gas shale reservoirs Includes case studies of major producing gas shale formations

Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal

Download or read book Proceedings of the International Field Exploration and Development Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2020-07-11 with total page 3907 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 8th International Field Exploration and Development Conference (IFEDC 2019) and addresses a broad range of topics, including: Low Permeability Reservoir, Unconventional Tight & Shale Oil Reservoir, Unconventional Heavy Oil and Coal Bed Gas, Digital and Intelligent Oilfield, Reservoir Dynamic Analysis, Oil and Gas Reservoir Surveillance and Management, Oil and Gas Reservoir Evaluation and Modeling, Drilling and Production Operation, Enhancement of Recovery, Oil and Gas Reservoir Exploration. The conference not only provided a platform to exchange experiences, but also promoted the advancement of scientific research in oil & gas exploration and production. The book is chiefly intended for industry experts, professors, researchers, senior engineers, and enterprise managers.

Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Download or read book Introduction to Directional and Horizontal Drilling written by J. A. Short and published by Pennwell Books. This book was released on 1993 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Short introduces the reader to directional and horizontal drilling. They are timely drilling techniques gaining increasing usage. This text is the fourth and latest book Short has written about the oil and gas industry. He shares with his readers the knowledge that he has acquired through years of experience.

Download or read book Applied Petroleum Geomechanics written by Test Test and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Petroleum Geomechanics provides a bridge between theory and practice as a daily use reference that contains direct industry applications. Going beyond the basic fundamentals of rock properties, this guide covers critical field and lab tests, along with interpretations from actual drilling operations and worldwide case studies, including abnormal formation pressures from many major petroleum basins. Rounding out with borehole stability solutions and the geomechanics surrounding hydraulic fracturing and unconventional reservoirs, this comprehensive resource gives petroleum engineers a much-needed guide on how to tackle today's advanced oil and gas operations. - Presents methods in formation evaluation and the most recent advancements in the area, including tools, techniques and success stories - Bridges the gap between theory of rock mechanics and practical oil and gas applications - Helps readers understand pore pressure calculations and predictions that are critical to shale and hydraulic activity

Download or read book Modern Shale Gas Development in the United States written by and published by . This book was released on 2009 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Drilling Engineering written by Adam T. Bourgoyne and published by . This book was released on 1986 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Drilling Engineering presents engineering science fundamentals as well as examples of engineering applications involving those fundamentals.

Download or read book DRILLING ENGINEERING written by M. Rafiqul Islam and published by Gulf Professional Publishing. This book was released on 2020-09-13 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Oil and Gas Development Series: Drilling Engineering delivers research materials and emerging technologies that conform sustainability drilling criteria. Starting with ideal zero-waste solutions in drilling and long-term advantages, the reference discusses the sustainability approach through the use of non-linear solutions and works its way through the most conventional practices and procedures used today. Step-by-step formulations and examples are provided to demonstrate how to look at conventional practices versus sustainable approaches with eventually diverging towards a more sustainable alternative. Emerging technologies are covered and detailed sustainability analysis is included. Economic considerations, analysis, and long-term consequences, focusing on risk management round out the with conclusions and a extensive glossary. Sustainable Oil and Gas Development Series: Drilling Engineering gives today's petroleum and drilling engineers a guide how to analyze and evaluate their operations in a more environmentally-driven way. - Proposes sustainable technical criteria and strategies for today's most common drilling practices such as horizontal drilling, managed pressure drilling, and unconventional shale activity - Discusses economic benefits and development challenges to invest in environmentally-friendly operations - Highlights the most recent research, analysis, and challenges that remain including global optimization

Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Drilling Manual written by Australian Drilling Industry Training Committee Limited and published by CRC Press. This book was released on 2015-04-01 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Invaluable Reference for Members of the Drilling Industry, from Owner–Operators to Large Contractors, and Anyone Interested In Drilling Developed by one of the world’s leading authorities on drilling technology, the fifth edition of The Drilling Manual draws on industry expertise to provide the latest drilling methods, safety, risk management, and management practices, and protocols. Utilizing state-of-the-art technology and techniques, this edition thoroughly updates the fourth edition and introduces entirely new topics. It includes new coverage on occupational health and safety, adds new sections on coal seam gas, sonic and coil tube drilling, sonic drilling, Dutch cone probing, in hole water or mud hammer drilling, pile top drilling, types of grouting, and improved sections on drilling equipment and maintenance. New sections on drilling applications include underground blast hole drilling, coal seam gas drilling (including well control), trenchless technology and geothermal drilling. It contains heavily illustrated chapters that clearly convey the material. This manual incorporates forward-thinking technology and details good industry practice for the following sectors of the drilling industry: Blast Hole Environmental Foundation/Construction Geotechnical Geothermal Mineral Exploration Mineral Production and Development Oil and Gas: On-shore Seismic Trenchless Technology Water Well The Drilling Manual, Fifth Edition provides you with the most thorough information about the "what," "how," and "why" of drilling. An ideal resource for drilling personnel, hydrologists, environmental engineers, and scientists interested in subsurface conditions, it covers drilling machinery, methods, applications, management, safety, geology, and other related issues.

Download or read book Reservoir Characterization written by Larry Lake and published by Elsevier. This book was released on 2012-12-02 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Characterization is a collection of papers presented at the Reservoir Characterization Technical Conference, held at the Westin Hotel-Galleria in Dallas on April 29-May 1, 1985. Conference held April 29-May 1, 1985, at the Westin Hotel—Galleria in Dallas. The conference was sponsored by the National Institute for Petroleum and Energy Research, Bartlesville, Oklahoma. Reservoir characterization is a process for quantitatively assigning reservoir properties, recognizing geologic information and uncertainties in spatial variability. This book contains 19 chapters, and begins with the geological characterization of sandstone reservoir, followed by the geological prediction of shale distribution within the Prudhoe Bay field. The subsequent chapters are devoted to determination of reservoir properties, such as porosity, mineral occurrence, and permeability variation estimation. The discussion then shifts to the utility of a Bayesian-type formalism to delineate qualitative ""soft"" information and expert interpretation of reservoir description data. This topic is followed by papers concerning reservoir simulation, parameter assignment, and method of calculation of wetting phase relative permeability. This text also deals with the role of discontinuous vertical flow barriers in reservoir engineering. The last chapters focus on the effect of reservoir heterogeneity on oil reservoir. Petroleum engineers, scientists, and researchers will find this book of great value.

Download or read book Well Logging and Formation Evaluation written by Toby Darling and published by Elsevier. This book was released on 2005-05-26 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hand guide in the Gulf Drilling Guides series offers practical techniques that are valuable to petrophysicists and engineers in their day-to-day jobs. Based on the author's many years of experience working in oil companies around the world, this guide is a comprehensive collection of techniques and rules of thumb that work.The primary functions of the drilling or petroleum engineer are to ensure that the right operational decisions are made during the course of drilling and testing a well, from data gathering, completion and testing, and thereafter to provide the necessary parameters to enable an accurate static and dynamic model of the reservoir to be constructed. This guide supplies these, and many other, answers to their everyday problems. There are chapters on NMR logging, core analysis, sampling, and interpretation of the data to give the engineer a full picture of the formation. There is no other single guide like this, covering all aspects of well logging and formation evaluation, completely updated with the latest techniques and applications.·A valuable reference dedicated solely to well logging and formation evaluation.·Comprehensive coverage of the latest technologies and practices, including, troubleshooting for stuck pipe, operational decisions, and logging contracts.·Packed with money-saving and time saving strategies for the engineer working in the field.

Download or read book Proceedings of the International Field Exploration and Development Conference 2021 written by Jia'en Lin and published by Springer Nature. This book was released on 2022-09-07 with total page 5829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on reservoir surveillance and management, reservoir evaluation and dynamic description, reservoir production stimulation and EOR, ultra-tight reservoir, unconventional oil and gas resources technology, oil and gas well production testing, and geomechanics. This book is a compilation of selected papers from the 11th International Field Exploration and Development Conference (IFEDC 2021). The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers, senior engineers as well as professional students.