Download or read book Proefschrift Groningen written by and published by . This book was released on 1932 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Gradient Tests of SLAC Linear Collider Accelerator Structures written by and published by . This book was released on 1994 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the current SLAC R & D program to develop room temperature accelerator structures for the Next Linear Collider (NLC). The structures are designed to operate at 11.4 GHz at an accelerating gradient in the range of 50 to 100 MV/m. In the past year a 26 cm constant-impedance traveling-wave section, a 75 cm constant-impedance traveling-wave section, and a 1.8 m traveling-wave section with detuned deflecting modes have been high-power tested. The paper presents a brief description of the RF test setup, the design and manufacturing details of the structures, and a discussion of test results including field emission, RF processing, dark current spectrum and RF breakdown.
Download or read book Extraction and Absorption of Higher Order Modes in Room Temperature Accelerators written by and published by . This book was released on 1993 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes methods for extracting and absorbing unwanted higher-order modes (HOMs) from normal-conducting accelerator structures. An introduction to the problems caused by HOMs is followed by a brief history of the development of techniques to suppress them, and some examples taken from existing and planned accelerators. These include damped radio frequency (RF) cavities for storage rings such as the proposed PEP-II B factory and accelerating structures for future linear collider projects.
Download or read book High Gradient Accelerating Structure Proceedings Of The Symposium On The Occasion Of 70th Birthday Of Junwen Wang written by Wei Gai and published by World Scientific. This book was released on 2014-10-24 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume, for the symposium in honor of Junwen Wang's 70th anniversary, is dedicated to his many important achievements in the field of accelerator physics.It includes the discussions of recent advances and challenging problems in the field of high gradient accelerating structure development.
Download or read book Gradient Limitations in Room Temperature and Superconducting Acceleration Structures written by and published by . This book was released on 2008 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerating gradient is a key parameter of the accelerating structure in large linac facilities, like future Linear Collider. In room temperature accelerating structures the gradient is limited mostly by breakdown phenomena, caused by high surface electric fields or pulse surface heating. High power processing is a necessary procedure to clean surface and improve the gradient. In the best tested X-band structures the achieved gradient is exceed 100 MV/m in of (almost equal to)200 ns pulses for breakdown rate of (almost equal to) 10−7. Gradient limit depends on number of factors and no one theory which can explain all sets of experimental results and predict gradient in new accelerating structure. In paper we briefly overview the recent experimental results of breakdown studies, progress in understanding of gradient limitations and scaling laws. Although superconducting rf technology has been adopted throughout the world for ILC, it has frequently been difficult to reach the predicted performance in these structures due to a number of factors: multipactoring, field emission, Q-slope, thermal breakdown. In paper we are discussing all these phenomena and the ways to increase accelerating gradient in SC cavity, which are a part of worldwide R & D program.
Download or read book Recent Progress in R D of Advanced Room Temperature Accelerator Structures written by and published by . This book was released on 2003 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NLC and JLC groups face two major challenges in designing X-Band accelerator structures for an electron-positron linear collider. The first is to demonstrate stable, long-term operation at a 70 MV/m gradient, which is required to keep the machine cost low, and the second is to strongly suppress the structure long-range wakefield, which is required to achieve high luminosity. During the past 2 years, the major emphasis has been on proving high gradient operation, although dipole wakefield suppression studies are continuing. This paper describes high gradient test results from a series of prototype TW and SW structures being developed for the NLC/JLC. Schemes for damping and detuning the dipole modes of these structures are also presented.
Download or read book International X Band Linear Collider Accelerator Structure R D written by and published by . This book was released on 2009 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than fifteen years before the International Technology Recommendation Panel (ITRP) decision in August, 2004, there were intensive R & D activities and broad international collaboration among the groups at SLAC, KEK, FNAL, LLNL and other labs for the room temperature X-Band accelerator structures. The goal was to provide an optimized design of the main linac structure for the NLC (Next Linear Collider) or GLC (Global Linear Collider). There have been two major challenges in developing X-band accelerator structures for the linear colliders. The first is to demonstrate stable, long-term operation at the high gradient (65 MV/m) that is required to optimize the machine cost. The second is to strongly suppress the beam induced long-range wakefields, which is required to achieve high luminosity. More than thirty X-band accelerator structures with various RF parameters, cavity shapes and coupler types have been fabricated and tested since 1989. A summary of the main achievements and experiences are presented in this talk including the structure design, manufacturing techniques, high power performance, and other structure related issues. Also, the new progress in collaborating with the CLIC, high gradient structures and X-Band structure applications for RF deflectors and others are briefly introduced.
Download or read book Handbook Of Accelerator Physics And Engineering Third Edition written by Alexander Wu Chao and published by World Scientific. This book was released on 2023-02-02 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing many new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to common formulae of previous compilations, hard to find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world's most able practioners of the art and science of accelerators.The seven chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities due to the various interactions mentioned. A chapter on operational considerations including discussions on the assessment and correction of orbit and optics errors, realtime feedbacks, generation of short photon pulses, bunch compression, phase-space exchange, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cryogenic vacuum systems, steady state microbuching, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes, machine learning, multiple frequency rf systems, FEL seeding, ultrafast electron diffraction, and Gamma Factory. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement, including undulators, and acceleration (both normal and superconducting) receive detailed treatment in a sub-systems chapter, beam measurement and apparatus being treated therein as well.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.
Download or read book Handbook of Accelerator Physics and Engineering written by Alexander Wu Chao and published by World Scientific. This book was released on 2013 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world''s most able practitioners of the art and science of accelerators.The eight chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities associated with the various interactions mentioned. A chapter on operational considerations includes discussions on the assessment and correction of orbit and optics errors, real-time feedbacks, generation of short photon pulses, bunch compression, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement and acceleration (both normal conducting and superconducting) receive detailed treatment in a subsystems chapter, beam measurement techniques and apparatus being treated therein as well. The closing chapter gives data and methods for radiation protection computations as well as much data on radiation damage to various materials and devices.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.
Download or read book Physics And Experiments With Linear Colliders Lcws95 Proceedings Of The Workshop In 2 Volumes written by Yoshiaki Fujii and published by World Scientific. This book was released on 1996-08-22 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collider experiments have become essential to studying elementary particles. In particular, lepton collisions such as e⁺e⁻ are ideal from both experimental and theoretical points of view, and are a unique means of probing the new energy region, sub-TeV to TeV. It is a common understanding that a next-generation e⁺e⁻ collider will have to be a linear machine that evades beam-energy losses due to synchrotron radiation. In this book, physics feasibilities at linear colliders are discussed in detail, taking into account the recent progress in high-energy physics.
Download or read book Report of the Special Technical Meeting on the Economic Aspects of the Rice Industry 3rd Bangkok Thailand 30 September 7 October 1955 written by and published by . This book was released on 1955 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reviews Of Accelerator Science And Technology Volume 5 Applications Of Superconducting Technology To Accelerators written by Alexander Wu Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several decades major advances in accelerators have resulted from breakthroughs in accelerator science and accelerator technology. After the introduction of a new accelerator physics concept or the implementation of a new technology, a leap in accelerator performance followed. A well-known representation of these advances is the Livingston chart, which shows an exponential growth of accelerator performance over the last seven or eight decades. One of the breakthrough accelerator technologies that support this exponential growth is superconducting technology. Recognizing this major technological advance, we dedicate Volume 5 of Reviews of Accelerator Science and Technology (RAST) to superconducting technology and its applications.Two major applications are superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities. SC magnets provide much higher magnetic field than their room-temperature counterparts, thus allowing accelerators to reach higher energies with comparable size as well as much reduced power consumption. SRF technology allows field energy storage for continuous wave applications and energy recovery, in addition to the advantage of tremendous power savings and better particle beam quality. In this volume, we describe both technologies and their applications. We also include discussion of the associated R&D in superconducting materials and the future prospects for these technologies.
Download or read book Comparative Study of Medium Damped and Detuned Linear Accelerator Structures written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Long range wakefields are a serious concern for a future linear collider based on room temperature accelerating structures. They can be suppressed either by detuning and or local damping or with some combination of both strategies. Detuning relies on precisely phasing the contributions of the dipole modes excited by the passage of a single bunch. This is accomplished by controlling individual mode frequencies, a process which dictates individual cell dimensional tolerances. Each mode must be excited with the correct strength; this in turn, determines cell-to-cell alignment tolerances. In contrast, in a locally damped structure, the modes are attenuated at the cell level. Clearly, mode frequencies and relative excitation become less critical in that context; mechanical fabrication tolerances can be relaxed. While local damping is ideal from the stand-point of long range wakefield suppression, this comes at the cost of reducing the shunt impedance and possibly unacceptable localized heating. Recently, the Medium Damped Structure (MDS), a compromise between detuning and local damping, has generated some interest. In this paper, we compare a hypothetical MDS to the NLC Rounded Damped Detuned Structure (RDDS) and investigate possible advantages from the standpoint fabrication tolerances and their relation to beam stability and emittance preservation.
Download or read book Frontiers Of Accelerator Technology Proceedings Of The Joint Us cern japan International School written by Melvin Month and published by World Scientific. This book was released on 1999-03-23 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motivation to conceive and build accelerators comes from a most fundamental need of man — to understand and control the world around us. With beams and their associated accelerators, scientists and engineers can gain understanding of the nature of matter and modify matter, which is not possible by other means. The areas already influenced by the developments in accelerator technology are high energy and nuclear physics, atomic and molecular physics, condensed matter physics and the biological sciences. There are also a growing number of applications in medicine and industry.This book summarizes all the currently available knowledge on the rf technology driving the development of particle beams for science, medicine and industry. It is a unique collection of information on this technology.
Download or read book Elementary Particles Accelerators and Colliders written by Ugo Amaldi and published by Springer. This book was released on 2013-03-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a historical consideration of the types and evolution of accelerators the physics of particle beams is provided in detail. Topics dealt with comprise linear and nonlinear beam dynamics, collective phenomena in beams, and interactions of beams with the surroundings. The design and principles of synchrotrons, circular and linear colliders, and of linear accelerators are discussed next. Also technological aspects of accelerators (magnets, RF cavities, cryogenics, power supply, vacuum, beam instrumentation, injection and extraction) are reviewed, as well as accelerator operation (parameter control, beam feedback system, orbit correction, luminosity optimization). After introducing the largest accelerators and colliders of their times the application of accelerators and storage rings in industry, medicine, basic science, and energy research is discussed, including also synchrotron radiation sources and spallation sources. Finally, cosmic accelerators and an outlook for the future are given.
Download or read book Progress Toward NLC written by and published by . This book was released on 2004 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accelerator structure groups for NLC (Next Linear Collider) and GLC (Global Linear Colliders) have successfully collaborated on the research and development of a major series of advanced accelerator structures based on room-temperature technology at X-band frequency. The progress in design, simulation, microwave measurement and high gradient tests are summarized in this paper. The recent effort in design and fabrication of the accelerator structure prototype for the main linac is presented in detail including HOM (High Order Mode) suppression and design of HOM couplers and fundamental mode couplers, optimized accelerator cavities as well as plans for future structures.
Download or read book Field Emission and Rf Breakdown in High gradient Room Temperature Linac Structures written by and published by . This book was released on 1997 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this article is to serve as a tutorial review on the subject of field emission and rf breakdown in high-gradient room-temperature accelerator structures and associated devices. The need to understand and control these two phenomena has become increasingly important because of the prospect of using high-gradient structures in future linear colliders. Electron field emission creates so-called dark current which parasitically absorbs rf energy, causes radiation, backgrounds, and possibly wakefields; it seems to be the precursor of rf breakdown, possibly in combination with local outgassing and plasma formation. In turn, rf breakdown limits the operation of accelerators and can cause irreversible damage to their physical structures. Research on these topics is interesting and challenging because it involves a mixture of disciplines such as surface physics, metallurgy, fabrication technologies, microwaves, beam dynamics and plasmas. This review consists of four parts: (1) field emission under dc, enhanced and rf conditions; (2) experimental set-ups; (3) prebreakdown stage--dark current and radiation; (4) experimental observations and analysis of rf breakdown. The review ends with conclusions and an outline of work that remains to be done.
