Download or read book Analysis of Rolling Element Bearings written by Wan Changsen and published by . This book was released on 1991 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Rolling Element Bearings provides a comprehensive introduction into the theory and design of rolling element bearings.
Download or read book Advanced Dynamics of Rolling Elements written by P.K. Gupta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: In any rotating machinery system, the bearing has traditionally been a crit ical member of the entire system, since it is the component that permits the relative motion between the stationary and moving parts. Depending on the application, a number of different bearing types have been used, such as oil-lubricated hydrodynamic bearings, gas bearings, magnetic suspensions, rolling element bearings, etc. Hydrodynamic bearings can provide any desired load support, but they are limited in stiffness and the associated power loss may be quite large. Gas bearings are used for high-precision applications where the supported loads are relatively light, bearing power losses are very low, and the rotating speeds generally high. For super precision components where no frictional dissipation or bearing power loss can be tolerated, magnetic suspensions are employed; again, the load support requirements are very low. Rolling element bearings have been widely used for those applications that require greater bearing versatility, due to the requirements for high-load and high-stiffness characteristics, while allowing moderate power loss and permitting variable speeds. A study of the dynamic interaction of rolling elements is, therefore, the subject of this text. Texts covering the analysis and design methodology of rolling elements are very limited. Notable works include Analysis of Stresses and Deflections (Jones, 1946, Vols. I and II), Ball and Roller Bearings, Their Theory, Design and Application (Eschmann, Hasbargen, and Weigand, 1958), Ball and Roller Bearing Engineering (Palmgren, 1959, 3rd ed. ), Advanced Bearing Technology (Bisson and Anderson, 1965), and Rolling Bearing Analysis (Harris, 1966).
Download or read book Computational Design of Rolling Bearings written by Hung Nguyen-Schäfer and published by Springer. This book was released on 2016-04-10 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.
Download or read book Grease Lubrication in Rolling Bearings written by Piet M. Lugt and published by John Wiley & Sons. This book was released on 2013-02-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal and dynamics properties. Later chapters cover the dynamics of greased bearings, including grease life, bearing life, reliability and testing. The final chapter covers lubrications systems – the systems that deliver grease to the components requiring lubrication. Grease Lubrication in Rolling Bearings: Describes the underlying physical and chemical properties of grease. Discusses the effect of load, speed, temperature, bearing geometry, bearing materials and grease type on bearing wear. Covers both bearing and grease performance, including thermo-mechanical ageing and testing methodologies. It is intended for researchers and engineers in the petro-chemical and bearing industry, industries related to this (e.g. wind turbine industry, automotive industry) and for application engineers. It will also be of interest for teaching in post-graduate courses.
Download or read book Rolling Bearing Tribology written by Gary L. Doll and published by Elsevier. This book was released on 2022-08-20 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling Bearing Tribology: Tribology and Failure Modes of Rolling Element Bearings discusses these machine elements that are used to accommodate motion on or about shafts in mechanical systems, with ball bearings, cylindrical roller bearings, spherical roller bearings, and tapered roller bearings reviewed. Each bearing type experiences different kinds of motion and forces with their respective raceway, retainers and guiding flanges. The material in this book identifies the tribology of the major bearing types and how that tribology depends upon materials, surfaces and lubrication. In addition, the book describes the best practices to mitigate common failure modes of rolling element bearings. - Discusses important tribological implications surrounding the performance and durability of rolling element bearings - Describes how the different types of roller bearings work - Explores the reasons behind the failure of roller bearings and presents information on how to mitigate those failures
Download or read book Computational Tapered and Cylinder Roller Bearings written by Hung Nguyen-Schäfer and published by Springer. This book was released on 2019-01-09 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents computational models that describe electro-mechanical characteristics of tapered and cylinder roller bearings in various industrial applications. Applying the Levenberg-Marquardt’s algorithm to solving strongly nonlinear coupled equation systems, the computational models consisting of many circular slices per rolling element enable computations of the local Hertzian pressures at the elastohydrodynamic (EHD) contact area, the relating oil-film thickness in elastohydrodynamic lubrication (EHL), the limiting voltage of electro-pitting, bearing frictions, and fatigue lifetimes of the bearings for various load spectra. Using the best-known machine-learning method for clustering, the load spectrum is clustered in k cluster means based on the invariant damage number to accelerate the load spectrum. Furthermore, the accelerated load spectrum is used for the testing procedure of the bearings to reduce the testing time and costs as well. The target audience of this book primarily comprises graduate students in mechanical engineering and practicing engineers of electro-machines and transmission systems who want to computationally design tapered and cylinder roller bearings for the automotive industry and other industries, and to deeply dive into these relating working fields.
Download or read book Rolling Bearings and Their Contribution to the Progress of Technology written by and published by . This book was released on 1986 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Monitoring of Induction Motors written by William T. Thomson and published by Cambridge University Press. This book was released on 2020-12-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of vibration monitoring of induction motors with this unique guide to on-line condition assessment and fault diagnosis, building on the author's fifty years of investigative expertise. It includes: *Robust techniques for diagnosing of a wide range of common faults, including shaft misalignment and/or soft foot, rolling element bearing faults, sleeve bearing faults, magnetic and vibrational issues, resonance in vertical motor drives, and vibration and acoustic noise from inverters. *Detailed technical coverage of thirty real-world industrial case studies, from initial vibration spectrum analysis through to fault diagnosis and final strip-down. *An introduction to real-world vibration spectrum analysis for fault diagnosis, and practical guidelines to reduce bearing failure through effective grease management. This definitive book is essential reading for industrial end-users, engineers, and technicians working in motor design, manufacturing, and condition monitoring. It will also be of interest to researchers and graduate students working on condition monitoring.
Download or read book Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1975 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Tribology of Bearings written by B C Majumdar and published by S. Chand Publishing. This book was released on 2008 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the basic principles and equations governing Hydrodynamic, Hydrostatic, Elastohydrodynamic and Gas Lubrication. The author has made an effort to explain the theory and present an exposition of the fundamentals of fluid film bearings, rolling element bearings, friction and wear of metals.
Download or read book Bearings written by Maurice L. Adams and published by CRC Press. This book was released on 2018-04-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearings: from Technoloogical Foundations to Practical Design Applications provides a modern study of bearing types, design factors, and industrial examples. The major classes of bearings are described, and design concepts are covered for rolling elements, surfaces, pivots, flexures, and compliance surfaces. Fluid film lubrication is presented, and the basics of tribology for bearings is explained. The book also looks at specific applications of bearing technology, including bearings in vehicles, rotating machinery, machine tools, and home appliances. Case studies are also included.
Download or read book Vibrations in Rotating Machinery written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.
Download or read book Advanced Concepts of Bearing Technology written by Tedric A. Harris and published by CRC Press. This book was released on 2006-10-09 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the fifth edition of the classic Rolling Bearing Analysis, this book examines bearing performance and service life for more complex loading, more extreme operating conditions, and higher-speed applications. Several topics are unique to this work, including mathematical relationships for internal load distribution under conditions of high speed, combined radial, axial, and moment loading, as well as the effects of various types of profiling. The authors also delve into the mathematical development of rolling element-raceway lubricant film thickness and contact friction, the stress-life method for calculating bearing fatigue, and the effects of shaft and supporting structure flexure on bearing loading and deflection.
Download or read book Bearing Design in Machinery written by Avraham Harnoy and published by CRC Press. This book was released on 2002-09-25 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamental principles of bearing selection, design, and tribology, this book discusses basic physical principles of bearing selection, lubrication, design computations, advanced bearings materials, arrangement, housing, and seals, as well as recent developments in bearings for high-speed aircraft engines. The author explores unique solutions to challenging design problems and presents rare case studies, such as hydrodynamic and rolling-element bearings in series and adjustable hydrostatic pads for large bearings. He focuses on the design considerations and calculations specific to hydrodynamic journal bearings, hydrostatic bearings, and rolling element bearings.
Download or read book Essential Concepts of Bearing Technology written by Tedric A. Harris and published by CRC Press. This book was released on 2006-10-09 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the fifth edition of the classic Rolling Bearing Analysis, this book builds a basic understanding of the fundamentals underlying the use, design, and performance of rolling bearings. It serves as a stand-alone introduction cutting across the array of disciplines necessary to evaluate and comprehend the performance and behavior of all types of rolling bearings. The authors derive the mathematics and theories underlying catalog values given by manufacturers and lead you from the various types of bearings through bearing geometry, applied loading, internal load distribution, deformation, functional performance, and structural materials. It makes an ideal introductory textbook as well as a practical field reference for professionals.
Download or read book Ball Bearing Lubrication written by Bernard J. Hamrock and published by John Wiley & Sons. This book was released on 1981 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ball and Roller Bearing Engineering written by Arvid Palmgren and published by . This book was released on 1959 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
