Download or read book Evaluation of Rolling Contacts in the Range of 550 F to 1000 F written by S. F. Murray and published by . This book was released on 1958 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental study was made on rolling contacts in the temperature range of 550© to 1000©F. Variables such as material composition, hardness, and operating conditions were investigated in a rolling test stand. Ball bearing tests were run to determine the effect of design parameters, bearing materials, lubricants, and operating conditions.
Download or read book Rolling Contact Phenomena written by Bo Jacobson and published by Springer. This book was released on 2014-05-04 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface.- Rolling Contact Phenomena - Linear Elasticity.- Finite Element Methods for Rolling Contact.- Plastic Deformation in Rolling Contact.- Non-Steady State Rolling Contact and Corrugations.- Modelling of Tyre Force and Moment Generation.- Rolling Noise.- Lubrication
Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2018-07-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understanding of the material discussed. The second edition has been extended with a more detailed exposition of elastohydrodynamic lubrication, an updated chapter on numerical simulation methods in contact mechanics, a new section on fretting in the chapter on wear, as well as numerous new exercises and examples, which help to make the book an excellent reference guide.
Download or read book Effect of Nine Lubricants on Rolling contact Fatigue Life written by Erwin V. Zaretsky and published by . This book was released on 1962 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three Dimensional Elastic Bodies in Rolling Contact written by J.J. Kalker and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for mechanicians, engineering mathematicians, and, generally for theoretically inclined mechanical engineers. It has its origin in my Master's Thesis (J 957), which I wrote under the supervision of Professor Dr. R. Timman of the Delft TH and Dr. Ir. A. D. de Pater of Netherlands Railways. I did not think that the surface of the problem had even been scratched, so I joined de Pater, who had by then become Professor in the Engineering Mechanics Lab. of the Delft TH, to write my Ph. D. Thesis on it. This thesis (1967) was weil received in railway circles, which is due more to de Pater's untiring promotion than to its merits. Still not satisfied, I feit that I needed more mathe matics, and I joined Professor Timman's group as an Associate Professor. This led to the present work. Many thanks are due to G. M. L. Gladwell, who thoroughly polished style and contents of the manuscript. Thanks are also due to my wife, herself an engineering mathematician, who read the manuscript through critically, and made many helpful comments, to G. F. M. Braat, who also read an criticised, and, in addition, drew the figures together with J. Schonewille, to Ms. A. V. M. de Wit, Ms. M. den Boef, and Ms. P. c. Wilting, who typed the manuscript, and to the Publishers, who waited patiently. Delft-Rotterdam, 17 July 1990. J. J.
Download or read book Rolling Bearing Analysis 2 Volume Set written by Tedric A. Harris and published by CRC Press. This book was released on 2006-11-02 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, Tedric Harris' Rolling Bearing Analysis has been the "bible" for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The answer is simple: because of its complete coverage from low- to high-speed applications and full derivations of the underlying mathematics from a leader in the field. Updated, revamped, and reorganized for the new millennium, the fifth incarnation of this classic reference is the most modern, flexible, and interactive tool in the field. What makes this edition so revolutionary? For starters, the coverage is split conveniently into two books: Essential Concepts of Bearing Technology introduces the fundamentals involved in the use, design, and performance of rolling bearings for more common applications; Advanced Concepts of Bearing Technology delves into more advanced topics involving more dynamic loading, more extreme conditions, and higher-speed applications. Furthermore, each book in this edition includes a CD-ROM that contains numerical examples as well as tables of dimensional, mounting, and life-rating data obtained from ABMA/ANSI standards. Whether you are interested in the mathematics behind the empirical values or methods for estimating the effects of complex stresses on fatigue endurance, Rolling Bearing Analysis, Fifth Edition compiles the techniques and the data that you need in a single, authoritative resource.
Download or read book Grease Lubrication in Rolling Bearings written by Piet M. Lugt and published by John Wiley & Sons. This book was released on 2013-02-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal and dynamics properties. Later chapters cover the dynamics of greased bearings, including grease life, bearing life, reliability and testing. The final chapter covers lubrications systems – the systems that deliver grease to the components requiring lubrication. Grease Lubrication in Rolling Bearings: Describes the underlying physical and chemical properties of grease. Discusses the effect of load, speed, temperature, bearing geometry, bearing materials and grease type on bearing wear. Covers both bearing and grease performance, including thermo-mechanical ageing and testing methodologies. It is intended for researchers and engineers in the petro-chemical and bearing industry, industries related to this (e.g. wind turbine industry, automotive industry) and for application engineers. It will also be of interest for teaching in post-graduate courses.
Download or read book Rolling Contact Fatigue Testing of Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1982 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atti del Workshop IGF Rolling contact fatigue applications and developments written by and published by Gruppo Italiano Frattura. This book was released on with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specifications and Drawings of Patents Relating to Electricity Issued by the U S written by and published by . This book was released on 1889 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rolling Bearing Tribology written by Gary L. Doll and published by Elsevier. This book was released on 2022-08-20 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling Bearing Tribology: Tribology and Failure Modes of Rolling Element Bearings discusses these machine elements that are used to accommodate motion on or about shafts in mechanical systems, with ball bearings, cylindrical roller bearings, spherical roller bearings, and tapered roller bearings reviewed. Each bearing type experiences different kinds of motion and forces with their respective raceway, retainers and guiding flanges. The material in this book identifies the tribology of the major bearing types and how that tribology depends upon materials, surfaces and lubrication. In addition, the book describes the best practices to mitigate common failure modes of rolling element bearings. Discusses important tribological implications surrounding the performance and durability of rolling element bearings Describes how the different types of roller bearings work Explores the reasons behind the failure of roller bearings and presents information on how to mitigate those failures
Download or read book Sliding rolling Contact And In hand Manipulation written by Lei Cui and published by World Scientific. This book was released on 2020-03-16 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robots interact with the world through curves and surfaces — the subjects of study in differential geometry. This book applies the moving-frame method, developed extensively by Élie Cartan, and the adjoint approach, conceived by Ernesto Cesàro, to study the kinematics of two surfaces subject to rolling contact and sliding-rolling contact to demonstrate the applications in robotic in-hand manipulation.Firstly, it explores two surfaces, and the geometry of both surfaces comes into play. Secondly, the book focuses on the geometry of the two surfaces within the encompassing space (extrinsic) rather than within the surfaces (intrinsic) because the book is concerned with the kinematics of one surface in three-dimensional Euclidean space — the real world. The book then concludes by applying this approach in robotic in-hand manipulation in the last chapter.
Download or read book Reevaluation of the Stress life Relation in Rolling element Bearings written by Richard Jay Parker and published by . This book was released on 1972 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Four groups of 12.7 millimeter diameter vacuum-degassed AISI 52100 balls were tested, each at a maximum Hertz stress in the range of 4.5 times 10 to 9th power to 6.0 times 10 to 9th power N/m2. Tests were run in the five-ball fatigue tester at a contact angle of 30 deg and a shaft speed of 10,000 rpm. The 10 percent fatigue lives at the four stress levels indicated that fatigue life is inversely proportional to maximum Hertz stress raised to the power of 12. This result agrees with a survey of the literature which suggests that a stress-life exponent of approximately 12 is typical of vacuum-processed bearing steels rather than the exponent of 9 which has been generally accepted by the bearing industry.
Download or read book Advanced Dynamics of Rolling Elements written by P.K. Gupta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: In any rotating machinery system, the bearing has traditionally been a crit ical member of the entire system, since it is the component that permits the relative motion between the stationary and moving parts. Depending on the application, a number of different bearing types have been used, such as oil-lubricated hydrodynamic bearings, gas bearings, magnetic suspensions, rolling element bearings, etc. Hydrodynamic bearings can provide any desired load support, but they are limited in stiffness and the associated power loss may be quite large. Gas bearings are used for high-precision applications where the supported loads are relatively light, bearing power losses are very low, and the rotating speeds generally high. For super precision components where no frictional dissipation or bearing power loss can be tolerated, magnetic suspensions are employed; again, the load support requirements are very low. Rolling element bearings have been widely used for those applications that require greater bearing versatility, due to the requirements for high-load and high-stiffness characteristics, while allowing moderate power loss and permitting variable speeds. A study of the dynamic interaction of rolling elements is, therefore, the subject of this text. Texts covering the analysis and design methodology of rolling elements are very limited. Notable works include Analysis of Stresses and Deflections (Jones, 1946, Vols. I and II), Ball and Roller Bearings, Their Theory, Design and Application (Eschmann, Hasbargen, and Weigand, 1958), Ball and Roller Bearing Engineering (Palmgren, 1959, 3rd ed. ), Advanced Bearing Technology (Bisson and Anderson, 1965), and Rolling Bearing Analysis (Harris, 1966).
Download or read book Power and the Engineer written by and published by . This book was released on 1921 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of Some Factors Affecting Rolling contact Fatigue Life written by Thomas L.. Carter and published by . This book was released on 1960 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
