Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-12-21 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability of rock slopes is an important issue in both civil and mining engineering. On civil projects, rock cuts must be safe from rock falls and large-scale slope instability during both construction and operation. In open pit mining, where slope heights can be many hundreds of meters, the economics of the operation are closely related to the steepest stable slope angle that can be mined. This extensively updated version of the classic text, Rock Slope Engineering by Hoek and Bray, deals comprehensively with the investigation, design and operation of rock slopes. Investigation methods include the collection and interpretation of geological and groundwater data, and determination of rock strength properties, including the Hoek Brown rock mass strength criterion. Slope design methods include the theoretical basis for the design of plane, wedge, circular and toppling failures, and design charts are provided to enable rapid checks of stability to be carried out. New material contained in this book includes the latest developments in earthquake engineering related to slope stability, probabilistic analysis, numerical analysis, blasting, slope movement monitoring and stabilization methods. The types of stabilization include rock anchors, shotcrete, drainage and scaling, as well as rock fall protecting methods involving barriers, ditches, nets and sheds. Rock Slopes: Civil and Mining Engineering contains both worked examples illustrating data interpretation and design methods, and chapters on civil and mining case studies. The case studies demonstrate the application of design methods to the construction of stable slopes in a wide variety of geological conditions. The book provides over 300 carefully selected references for those who wish to study the subject in greater detail. It also includes an introduction by Dr. Evert Hoek.
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.
Download or read book Rock Slope Engineering written by Evert Hoek and published by CRC Press. This book was released on 1981-06-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical properties of rock.
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering. It has been heavily updated and now covers weathered rock, remote sensing, seismic design, and numerical analysis using FLAC and UDEC.
Download or read book Rock Fall Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2014-09-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock falls can be a public safety issue. This book provides comprehensive information on identification of these hazards, and design and construction of protection methods.Rock Fall Engineering describes first, the theoretical background to rock fall behavior in terms of the impact and trajectory phases of rock falls, and second, how this informati
Download or read book Rock Slope Engineering written by Evert Hoek and published by . This book was released on 1977 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations on Rock written by Duncan C. Wyllie and published by CRC Press. This book was released on 2003-09-02 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the successful Foundations on Rock presents an up-to-date practical reference book describing current engineering practice in the investigation, design and construction of foundations on rock. An extra chapter on Tension Foundations has been included. The methods set out are readily applicable to high rise buildings, bridges,
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability of rock slopes is an important issue in both civil and mining engineering.a On civil projects, rock cuts must be safe from rock falls and large-scale slope instability during both construction and operation. In open pit mining, where slope heights can be many hundreds of meters, the economics of the operation are closely related to the steepest stable slope angle that can be mined. a This extensively updated version of the classic text, Rock Slope Engineering by Hoek and Bray, deals comprehensively with the investigation, design and operation of rock slopes. Investigation methods.
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering in Rocks for Slopes Foundations and Tunnels written by T. Ramamurthy and published by PHI Learning Pvt. Ltd.. This book was released on 2010-08 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the ever-increasing developmental activities as diverse as the construction of dams, roads, tunnels, underground powerhouses and storage facilities, petroleum exploration and nuclear repositories, a more comprehensive and updated understanding of rock mass is essential for civil engineers, engineering geologists, geophysicists, and petroleum and mining engineers. Though some contents of this vast subject are included in undergraduate curriculum, there are full-fledged courses on Rock Mechanics/Rock Engineer-ing in postgraduate programmes in civil engineering and mining engineering. Much of the material presented in this book is also taught to geology and geophysics students. In addition, the book is suitable for short courses conducted for teachers, practising engineers and engineering geologists. This book, with contributions from a number of authors with expertise and vast experience in various areas of rock engineering, gives an in-depth analysis of the multidimensional aspects of the subject. The text covers a wide range of topics related to engineering behaviour of rocks and rock masses, their classifications, interpretation of geological mapping of joints through stereographic projection, in situ stress measurements, laboratory and field tests, stability of rock slopes, foundations of structures, including dams and support systems for underground excavations. The Second Edition has been enriched with new topics such as minimum overburden on pressure tunnels, pressure around vertical cylindrical shaft, thickness of steel lining, and penetration rate from joint factor. What distinguishes the text is the application of numerical methods to solve various problems by discrete element and equivalent material concepts, interpretations of geomechanics modelling test data, excavation methods, ground improving methods, and use of roadheaders and TBMs. The book provides an excellent understanding of how to solve problems in rock engineering and should immensely benefit students, teachers, professionals and designers alike.
Download or read book Engineering Geology written by F G Bell and published by Elsevier. This book was released on 2007-02-14 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every engineering structure, whether it's a building, bridge or road, is affected by the ground on which it is built. Geology is of fundamental importance when deciding on the location and design of all engineering works, and it is essential that engineers have a basic knowledge of the subject. Engineering Geology introduces the fundamentals of the discipline and ensures that engineers have a clear understanding of the processes at work, and how they will impact on what is to be built. Core areas such as stratigraphy, rock types, structures and geological processes are explained, and put in context. The basics of soil mechanics and the links between groundwater conditions and underlying geology are introduced. As well as the theoretical knowledge necessary, Professor Bell introduces the techniques that engineers will need to learn about and understand the geological conditions in which they intend to build. Site investigation techniques are detailed, and the risks and risk avoidance methods for dealing with different conditions are explained. * Accessible introduction to geology for engineers * Key points illustrated with diagrams and photographs * Teaches the impact of geology on the planning and design of structures
Download or read book Support of Underground Excavations in Hard Rock written by E. Hoek and published by CRC Press. This book was released on 2000-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and economical construction of tunnels, mines, and other subterranean works depends on the correct choice of support systems to ensure that the excavations are stable. These support systems should be matched to the characterstics of the rock mass and the excavation techniques adopted. Establishing the support requirements, designing support systems and installing these correctly are essential elements in safe underground construction. This is a comprehensive and practical work which also gives access to user-friendly computer programmes which enable the investigation and design of support techniques. Details on how to obtain this software are also included in the book.
Download or read book Landslides and Engineered Slopes Experience Theory and Practice written by Stefano Aversa and published by CRC Press. This book was released on 2018-04-17 with total page 2224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landslides and Engineered Slopes. Experience, Theory and Practice contains the invited lectures and all papers presented at the 12th International Symposium on Landslides, (Naples, Italy, 12-19 June 2016). The book aims to emphasize the relationship between landslides and other natural hazards. Hence, three of the main sessions focus on Volcanic-induced landslides, Earthquake-induced landslides and Weather-induced landslides respectively, while the fourth main session deals with Human-induced landslides. Some papers presented in a special session devoted to "Subareal and submarine landslide processes and hazard” and in a “Young Session” complete the books. Landslides and Engineered Slopes. Experience, Theory and Practice underlines the importance of the classic approach of modern science, which moves from experience to theory, as the basic instrument to study landslides. Experience is the key to understand the natural phenomena focusing on all the factors that play a major role. Theory is the instrument to manage the data provided by experience following a mathematical approach; this allows not only to clarify the nature and the deep causes of phenomena but mostly, to predict future and, if required, manage similar events. Practical benefits from the results of theory to protect people and man-made works. Landslides and Engineered Slopes. Experience, Theory and Practice is useful to scientists and practitioners working in the areas of rock and soil mechanics, geotechnical engineering, engineering geology and geology.
Download or read book Rock Slope Stability written by Charles A. Kliche and published by Society for Mining, Metallurgy, and Exploration, Incorporated. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide for mining and construction engineers responsible for rock slope stability. This book focuses on rock slope stability, with sections on geological data collection, geotechnical data collection and analysis, surface water and groundwater effects, kinematic and kinetic stability analysis, rock slope stabilization techniques, and rock slope instrumentation and monitoring. Because of the discontinuous nature of rock, the design of stable rock slopes is as much an art as it is applied engineering. Experience can only be achieved from the proper utilization of these theories of soil and rock mechanics, structural geology, and hydrology. Rock Slope Stability is invaluable for engineering geologists, geotechnical engineers, mining engineers, civil engineers, and mine managers-- as well as anyone else dedicated to engineering slopes that are stable and safe and that enable a financial return.
Download or read book Rock Mechanics written by Barry H.G. Brady and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been completely revised to reflect the notable innovations in mining engineering and the remarkable developments in the science of rock mechanics and the practice of rock angineering taht have taken place over the last two decades. Although "Rock Mechanics for Underground Mining" addresses many of the rock mechanics issues that arise in underground mining engineering, it is not a text exclusively for mining applications. Based on extensive professional research and teaching experience, this book will provide an authoratative and comprehensive text for final year undergraduates and commencing postgraduate stydents. For profesional practitioners, not only will it be of interests to mining and geological engineers, but also to civil engineers, structural mining geologists and geophysicists as a standard work for professional reference purposes.
Download or read book Engineering Rock Mass Classifications written by Z. T. Bieniawski and published by John Wiley & Sons. This book was released on 1989-08-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first authoritative reference on rock mass classification, consolidating into one handy source information once widely scattered throughout the literature. It includes new, previously unpublished material and case histories, presents the fundamental concepts of classification schemes, and critically appraises their practical application in industrial projects such as tunneling and mining.
