Download or read book Robust Scheduling of Real time Applications on Efficient Embedded Multicore Systems written by Michael Deubzer and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiprocessor Scheduling for Real Time Systems written by Sanjoy Baruah and published by Springer. This book was released on 2015-01-02 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of both theoretical and pragmatic aspects of resource-allocation and scheduling in multiprocessor and multicore hard-real-time systems. The authors derive new, abstract models of real-time tasks that capture accurately the salient features of real application systems that are to be implemented on multiprocessor platforms, and identify rules for mapping application systems onto the most appropriate models. New run-time multiprocessor scheduling algorithms are presented, which are demonstrably better than those currently used, both in terms of run-time efficiency and tractability of off-line analysis. Readers will benefit from a new design and analysis framework for multiprocessor real-time systems, which will translate into a significantly enhanced ability to provide formally verified, safety-critical real-time systems at a significantly lower cost.
Download or read book Self Organization in Embedded Real Time Systems written by M. Teresa Higuera-Toledano and published by Springer Science & Business Media. This book was released on 2012-11-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the emerging field of self-organizing, multicore, distributed and real-time embedded systems. Self ‐organization of both hardware and software can be a key technique to handle the growing complexity of modern computing systems. Distributed systems running hundreds of tasks on dozens of processors, each equipped with multiple cores, requires self‐organization principles to ensure efficient and reliable operation. This book addresses various, so-called Self‐X features such as self-configuration, self‐optimization, self‐adaptation, self‐healing and self‐protection.
Download or read book Real Time Embedded Systems written by Meikang Qiu and published by CRC Press. This book was released on 2011-06-01 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ubiquitous in today's consumer-driven society, embedded systems use microprocessors that are hidden in our everyday products and designed to perform specific tasks. Effective use of these embedded systems requires engineers to be proficient in all phases of this effort, from planning, design, and analysis to manufacturing and marketing.Taking a sys
Download or read book Reverse Engineering of Real Time System Models From Event Trace Recordings written by Sailer, Andreas and published by University of Bamberg Press. This book was released on 2019 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Efficient and Robust Dynamic Scheduling and Synchronization in Practical Embedded Real time Multiprocessor Systems written by Martin Alfranseder and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Real Time Computing written by Yu-Chu Tian and published by Springer Nature. This book was released on 2022-08-08 with total page 1511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this handbook is to summarize the recent rapidly developed real-time computing technologies, from theories to applications. This handbook benefits the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications. In general, the handbook is divided into three main parts (subjected to be modified): theory, design, and application covering different but not limited to the following topics: - Real-time operating systems - Real-time scheduling - Timing analysis - Programming languages and run-time systems - Middleware systems - Design and analysis tools - Real-time aspects of wireless sensor networks - Energy aware real-time methods
Download or read book Improving Disaster Resilience and Mitigation IT Means and Tools written by Horia-Nicolai Teodorescu and published by Springer. This book was released on 2014-09-08 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this volume is comprised of the fundamentals, models, and information technologies (IT) methods and tools for disaster prediction and mitigation. A more detailed list of topics includes mathematical and computational modeling of processes leading to or producing disasters, modeling of disaster effects, IT means for disaster mitigation, including data mining tools, knowledge-based and expert systems for use in disaster circumstances, GIS-based systems for disaster prevention and mitigation and equipment for disaster-prone areas. A specific type or class of disasters (natural or human-made), however will not be part of the main focus of this work. Instead, this book was conceived to offer a comprehensive, integrative view on disasters, seeking to determine what various disasters have in common. Because disaster resilience and mitigation involve humans, societies and cultures, not only technologies and economic models, special attention was paid in this volume to gain a comprehensive view on these issues, as a foundation of the IT tool design.
Download or read book Scratchpad Memory Management for Multicore Real time Embedded Systems written by Saud Wasly and published by . This book was released on 2018 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multicore systems will continue to spread in the domain of real-time embedded systems due to the increasing need for high-performance applications. This research discusses some of the challenges associated with employing multicore systems for safety-critical real-time applications. Mainly, this work is concerned with providing: 1) efficient inter-core timing isolation for independent tasks, and 2) predictable task communication for communicating tasks. Principally, we introduce a new task execution model, based on the 3-phase execution model, that exploits the Direct Memory Access (DMA) controllers available in modern embedded platforms along with ScratchPad Memories (SPMs) to enforce strong timing isolation between tasks. The DMA and the SPMs are explicitly managed to pre-load tasks from main memory into the local (private) scratchpad memories. Tasks are then executed from the local SPMs without accessing main memory. This model allows CPU execution to be overlapped with DMA loading/unloading operations from and to main memory. We show that by co-scheduling task execution on CPUs and using DMA to access memory and I/O, we can efficiently hide access latency to physical resources. In turn, this leads to significant improvements in system schedulability, compared to both the case of unregulated contention for access to physical resources and to previous cache and SPM management techniques for real-time systems. The presented SPM-centric scheduling algorithms and analyses cover single-core, partitioned, and global real-time systems. The proposed scheme is also extended to support large tasks that do not fit entirely into the local SPM. Moreover, the schedulability analysis considers the case of recovering from transient soft errors (bit flips caused by a single event upset) in several levels of memories, that cannot be automatically corrected in hardware by the ECC unit. The proposed SPM-centric scheduling is integrated at the OS level; thus it is transparent to applications. The proposed scheme is implemented and evaluated on an FPGA platform and a Commercial-Off-The-Shelf (COTS) platform. In regards to real-time task communication, two types of communication are considered. 1) Asynchronous inter-task communication, between either sequential tasks (single-threaded) or parallel tasks (multi-threaded). 2) Intra-task communication, where parallel threads of the same application exchange data. A new task scheduling model for parallel tasks (Bundled Scheduling) is proposed to facilitate intra-task communication and reduce synchronization overheads. We show that the proposed bundled scheduling model can be applied to several parallel programming models, such as fork-join and DAG-based applications, leading to improved system schedulability. Finally, intra-task communication is governed by a predictable inter-core communication platform. Specifically, we propose HopliteRT, a lean and predictable Network-on-Chip that connects the private SPMs.
Download or read book Real time Operating System Services for Networked Embedded Systems written by Khawar M. Zuberi and published by . This book was released on 1998 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real time Systems Scheduling 1 written by Maryline Chetto and published by John Wiley & Sons. This book was released on 2014-11-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time systems are used in a wide range of applications, including control, sensing, multimedia, etc. Scheduling is a central problem for these computing/communication systems since responsible of software execution in a timely manner. This book provides state of knowledge in this domain with special emphasis on the key results obtained within the last decade. This book addresses foundations as well as the latest advances and findings in Real-Time Scheduling, giving all references to important papers. But nevertheless the chapters will be short and not overloaded with confusing details. Coverage includes scheduling approaches for mono-core as well as multi-core platforms, dependent tasks, networks, and notably very tremendous recent advances in scheduling of energy constrained embedded systems. Other sophisticated issues such as feedback control scheduling and timing analysis of critical applications are also addressed. This volume can serve as a textbook for courses on the topic in bachelor and in more advanced master programs. It also provides a reference for computer scientists and engineers involved in the design or the development of Cyber-Physical Systems which require up-to-date real-time scheduling solutions.
Download or read book Reliable and Energy Efficient Streaming Multiprocessor Systems written by Anup Kumar Das and published by Springer. This book was released on 2018-01-03 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses analysis, design and optimization techniques for streaming multiprocessor systems, while satisfying a given area, performance, and energy budget. The authors describe design flows for both application-specific and general purpose streaming systems. Coverage also includes the use of machine learning for thermal optimization at run-time, when an application is being executed. The design flow described in this book extends to thermal and energy optimization with multiple applications running sequentially and concurrently.
Download or read book Challenges and Directions Forward for Dealing with the Complexity of Future Smart Cyber Physical Systems written by Martin Törngren and published by MDPI. This book was released on 2021-02-16 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key aspect of cyber-physical systems (CPS) is their potential for integrating information technologies with embedded control systems and physical systems to form new or improved functionalities. CPS thus draws upon advances in many areas. This positioning provides unprecedented opportunities for innovation, both within and across existing domains. However, at the same time, it is commonly understood that we are already stretching the limits of existing methodologies. In embarking towards CPS with such unprecedented capabilities, it becomes essential to improve our understanding of CPS complexity and how we can deal with it. Complexity has many facets, including complexity of the CPS itself, of the environments in which the CPS acts, and in terms of the organizations and supporting tools that develop, operate, and maintain CPS. This book is a result of a journal Special Issue, with the objective of providing a forum for researchers and practitioners to exchange their latest achievements and to identify critical issues, challenges, opportunities, and future directions for how to deal with the complexity of future CPS. The contributions include 10 papers on the following topics: (I) Systems and Societal Aspects Related to CPS and Their Complexity; (II) Model-Based Development Methods for CPS; (III) CPS Resource Management and Evolving Computing Platforms; and (IV) Architectures for CPS.
Download or read book Hard Real Time Computing Systems written by Giorgio C Buttazzo and published by Springer Science & Business Media. This book was released on 2011-09-10 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition offers an indispensable exposition on real-time computing, with particular emphasis on predictable scheduling algorithms. It introduces the fundamental concepts of real-time computing, demonstrates the most significant results in the field, and provides the essential methodologies for designing predictable computing systems used to support time-critical control applications. Along with an in-depth guide to the available approaches for the implementation and analysis of real-time applications, this revised edition contains a close examination of recent developments in real-time systems, including limited preemptive scheduling, resource reservation techniques, overload handling algorithms, and adaptive scheduling techniques. This volume serves as a fundamental advanced-level textbook. Each chapter provides basic concepts, which are followed by algorithms, illustrated with concrete examples, figures and tables. Exercises and solutions are provided to enhance self-study, making this an excellent reference for those interested in real-time computing for designing and/or developing predictable control applications.
Download or read book Smart Multicore Embedded Systems written by Massimo Torquati and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference to the state-of-the-art of high-level programming models and compilation tool-chains for embedded system platforms. The authors address challenges faced by programmers developing software to implement parallel applications in embedded systems, where very often they are forced to rewrite sequential programs into parallel software, taking into account all the low level features and peculiarities of the underlying platforms. Readers will benefit from these authors’ approach, which takes into account both the application requirements and the platform specificities of various embedded systems from different industries. Parallel programming tool-chains are described that take as input parameters both the application and the platform model, then determine relevant transformations and mapping decisions on the concrete platform, minimizing user intervention and hiding the difficulties related to the correct and efficient use of memory hierarchy and low level code generation.
Download or read book Designing Modern Embedded Systems Software Hardware and Applications written by Stefan Henkler and published by Springer Nature. This book was released on 2023-06-10 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, held in Lippstadt, Germany, during November 3-4, 2022. The 10 full revised papers and 2 short papers presented were carefully reviewed and selected from 13 submissions. The presented research and technical works cover system-level design methods, algorithms, verification and validation techniques, estimation of system properties and characteristics, performance analysis, and real-time systems design. Also, the book presents industrial and real-world application case studies that discuss the challenges and realizations of modern embedded systems, especially when it comes to including artificial intelligence algorithms and techniques in embedded systems.
Download or read book Techniques for Building Timing Predictable Embedded Systems written by Nan Guan and published by Springer. This book was released on 2016-02-03 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes state-of-the-art techniques for designing real-time computer systems. The author shows how to estimate precisely the effect of cache architecture on the execution time of a program, how to dispatch workload on multicore processors to optimize resources, while meeting deadline constraints, and how to use closed-form mathematical approaches to characterize highly variable workloads and their interaction in a networked environment. Readers will learn how to deal with unpredictable timing behaviors of computer systems on different levels of system granularity and abstraction.
