Download or read book Robust Plastic Product Design A Holistic Approach written by Vikram Bhargava and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-12-11 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tooling, molding, secondary operations, material selection, evaluation and testing, design, project management, costing, value engineering, international supplier management and enhancement, and more: this book provides a broad insight from the author’s over 40 years of experience in the plastics industry. Aimed at both technical and non-technical personnel involved with plastic product design and manufacturing, this book shows how having the big picture leads to effective solutions and high-quality products. Numerous case studies of product failures exemplify the key concepts. The reader will benefit from the author’s unique depth and breadth of knowledge and experience as a team manager and hands-on contributor in all aspects of plastics, involving extremely robust, mission-critical products. Judicious attention to fundamental engineering principles is always at the foundation but “people issues” are also brought into focus from the author’s background as a long-time international trainer and Six Sigma expert. The book is therefore an essence of all the experience gained along the way: the good, the bad, and the ugly. This book is unique among the many other fine books available in this subject area in that it is the perspective of one who has been in the trenches—as opposed to an academician, scientist, or other professional from a field with narrower scope, such as material science, tooling, or manufacturing. Hence, the HOLISTIC APPROACH. Contents: • Causes of Plastics Failure • The Holistic Approach • Plastic Materials • Design • Tooling Considerations • Processing • Secondary Operations • Part and Tool Costs • Six Sigma Techniques in Plastics • Further Reading and Reference Material With forewords by Glenn Beall, Louis Maresca, and Joe McFadden.
Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by Elsevier. This book was released on 2024-05-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design 2e provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This fully updated edition features new practical advice on how to design sustainably throughout the book. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Brings together the worlds of the plastic part designer and the industrial designer and shows how each impacts the success of a development project. Teaches the “Four Pillars considerations (Materials, Processes, Tooling, and Design) required for every design decision to be made during a plastic part design project. The interrelationship of these considerations with the sustainability intent for the product being developed is taught and illustrated within this new edition. Illustrates the product design process roadmap from creation of the concept through implementation into manufacturing, highlighting steps and methods used throughout the process to limit risk and ensure success. Includes methods and design project management techniques used to ensure an efficient design process and successful manufacturing of the product or part.
Download or read book Plastics Product Design written by Paul F. Mastro and published by John Wiley & Sons. This book was released on 2016-02-24 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at designers who have had limited or no experience with plastics materials as well as a more experienced designer who is designing a part for a use, process or an application that they are not familiar with. The reader is provided with an introduction to plastics as a design material and a discussion of materials commonly in use today. There is a discussion of a variety of processes available to the designer to make a part along with the design considerations each process will entail. This section also includes a discussion of useful prototyping processes, including advantages and disadvantages of each. Next, the book will discuss general design considerations applicable to most plastics product designs. In section 2 of the book the author will discuss elements of design of a number of generic plastic product types based on his 40+ years of experience of product design and development for a several companies with a variety of products. This section will include discussions of structural components, gears, bearings, hinges, snap fits, packaging, pressure vessels, and optical components. This section will discuss the general considerations that apply to these applications as well as specific incites about each particular application. The book concludes with a discussion of the general design process.
Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by William Andrew. This book was released on 2017-08-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture Enables designers to establish a solid foundation for new product development on the ‘four pillars’ of the process: materials, processes, tooling, and design Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization
Download or read book Plastic Product Design written by Ronald D. Beck and published by . This book was released on 1980 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thinking about the box written by Renee Wever and published by . This book was released on 2009 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Design with Plastics written by Joseph B. Dym and published by . This book was released on 1983 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indicates the deviations in design practices between metals and plastics. Discusses the ways of circumventing ill effects on plastics as well as the corrective measures that can be taken. Covers choice of product material from the perspective of: favorable circumstances for application, design characteristics of each material, prediction of expected life, comparison, and relative costs. Includes detailed practical design problems.
Download or read book Innovation and Product Management written by Kurt Gaubinger and published by Springer. This book was released on 2014-09-12 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marketplace complexity and dynamics create an environment that increases the uncertainty of innovation activities. In this context systematic management of innovation and product management are increasingly important for company success. This book presents the fundamentals of innovation and product management and introduces the reader to a holistic process model with particular focus on innovation and uncertainty. This integrated consideration of innovation management and product innovation within an interdisciplinary approach represents a unique characteristic of this book. The book is designed to address the needs of managers who want a practical but well-researched guide to innovation and product management. Graduate and advanced undergraduate students would also find the chapters in this book particularly useful.
Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.
Download or read book Industrial Design of Plastics Products written by M. Joseph Gordon and published by Wiley-Interscience. This book was released on 2003 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive volume to date on the design and manufacture of plastics Plastic product design relies on the same formulas and procedures used for the design of metal, yet plastics are unique building materials that require more in-depth knowledge to produce acceptable results. Plastic product designers must address specific quality control concerns in order to produce quality products at acceptable costs. Covering the many variables that impact the success of a plastics manufacturing program, Industrial Design of Plastics Products provides a complete resource for the efficient design and production of plastics. Industrial Design of Plastics Products lists all steps necessary for effectively designing a plastic product for any industry. Physical properties and agency codes are listed, as well as full checklists for all areas of product design, contract, material selection, assembly techniques, manufacture, tooling, decoration, and shipping. The text also offers a list of examples with corresponding case studies to illustrate key concepts. Other features of this comprehensive volume include: * An easy-to-understand list of requirements for establishing a manufacturing program * A discussion of how material properties should be analyzed to achieve a product with the correct properties * A full set of design equations, including examples of how they should be used and considered when designing a plastic product Successful plastic product design involves using the design team method to determine which material, mold, and process is best to manufacture a product. Industrial Design of Plastics Products provides a more detailed treatment in the basics of the subject than any other available resource, proving invaluable to design, chemical, and electrical engineers; materials scientists; and plastics manufacturers.
Download or read book Applied Plastic Product Design written by Robert L. Davis and published by . This book was released on 1947 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Design Engineering written by Sándor Vajna and published by Springer Nature. This book was released on 2020-08-25 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses Integrated Design Engineering (IDE), which represents a further development of Integrated Product Development (IPD) into an interdisciplinary model for both a human-centred and holistic product development. The book covers the systematic use of integrated, interdisciplinary, holistic and computer-aided strategies, methods and tools for the development of products and services, taking into account the entire product lifecycle. Being applicable to various kinds of products (manufactured, software, services, etc.), it helps readers to approach product development in a synthesised and integrated way. The book explains the basic principles of IDE and its practical application. IDE’s usefulness has been demonstrated in case studies on actual industrial projects carried out by all book authors. A neutral methodology is supplied that allows the reader to choose the appropriate working practices and performance assessment techniques to develop their product quickly and efficiently. Given its manifold topics, the book offers a valuable reference guide for students in engineering, industrial design, economics and computer science, product developers and managers in industry, as well as industrial engineers and technicians.
Download or read book Fantastic Plastic written by Susan T. I. Mossman and published by Black Dog Pub Limited. This book was released on 2008 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fantastic Plastic provides a fascinating look at how designs using plastics can be considered works of art, as well as objects of our everyday lives. Within Fantastic Plastic the material is explored, from the high end of furniture and product design, to the throwaway, disposable world of condoms and plastic bags. Fantastic Plastic shows how product design has developed and considers plastics' usability, technology and appearance. From the trademarked names of Spandex, Teflon, Nylon, Rayon, Formica and Tupperware, this book follows plastic through its iconic incarnations and reflects on how their function and reputation have changed over their lifetime.
Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer. This book was released on 2011-10-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.
Download or read book Plastics Design Handbook written by Dominick V. Rosato and published by . This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work provides a simplified and practical approach to designing with plastic materials. It enables the reader to recognize the fundamental considerations necessary when designing products with plastics pertaining to the different processes and different plastics. Intended for both technical and non-technical readers, it encompasses the relation of materials and processes to understanding the art of designing. After introducing the design basics, the book moves on to discuss those factors which influence design. Design features and concepts are then covered, as is how to interpret the plethora of data available. Cost estimation, a key factor of the design process, is investigated in detail before the relative merits of the different types of plastics and processing techniques are presented. It finishes with a look at how the design of individual elements affect the final product design. The information contained will be invaluable to even the most experienced designers and engineers, as well as providing a firm basis for the novice. It provides a complete review of all aspects of the design process from the practical to the theoretical, and the elementary to the advanced.
Download or read book Designing for the Circular Economy written by Martin Charter and published by Routledge. This book was released on 2018-08-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The circular economy describes a world in which reuse through repair, reconditioning and refurbishment is the prevailing social and economic model. The business opportunities are huge but developing product and service offerings and achieving competitive advantage means rethinking your business model from early creativity and design processes, through marketing and communication to pricing and supply. Designing for the Circular Economy highlights and explores ‘state of the art’ research and industrial practice, highlighting CE as a source of: new business opportunities; radical business change; disruptive innovation; social change; and new consumer attitudes. The thirty-four chapters provide a comprehensive overview of issues related to product circularity from policy through to design and development. Chapters are designed to be easy to digest and include numerous examples. An important feature of the book is the case studies section that covers a diverse range of topics related to CE, business models and design and development in sectors ranging from construction to retail, clothing, technology and manufacturing. Designing for the Circular Economy will inform and educate any companies seeking to move their business models towards these emerging models of sustainability; organizations already working in the circular economy can benchmark their current activities and draw inspiration from new applications and an understanding of the changing social and political context. This book will appeal to both academia and business with an interest in CE issues related to products, innovation and new business models.
Download or read book Circular Economy in the European Union written by Dagmara Lewicka and published by Taylor & Francis. This book was released on 2023-12-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the European Union: Organisational Practice and Future Directions in Germany, Poland and Spain presents the EU's journey towards a circular economy (CE), identifying significant organisational practices in this gradually adopted field among member countries. The book also aims to develop and propose innovative initiatives and practices for implementing CE across various economic sectors in selected EU countries, such as Poland, Spain and Germany. Covering topics which include the implementation of CE in the EU and worldwide, green employee behaviors, corporate social responsibility in creating pro-environmental attitudes and models of eco-digital factory transformation in SMEs, the book emphasises the importance of innovative, environmentally friendly, low-waste, and low-emission technologies. Consisting of thirteen interconnected chapters, it discusses the challenges and opportunities of CE, the importance of business engagement in addressing social and environmental problems, and provides practical examples of innovative solutions in various sectors. This volume will be of great interest to students and scholars of circular economy, corporate governance, business ethics and sustainable business, as well as entrepreneurs, managers, government representatives, and non-governmental organisations active in CE.
