Download or read book Robust Manufacturing Control written by Katja Windt and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume collects research papers, presented at the CIRP Sponsored Conference Robust Manufacturing Control: Innovative and Interdisciplinary Approaches for Global Networks (RoMaC 2012, Jacobs University, Bremen, Germany, June 18th-20th 2012). These research papers present the latest developments and new ideas focusing on robust manufacturing control for global networks. Today, Global Production Networks (i.e. the nexus of interconnected material and information flows through which products and services are manufactured, assembled and distributed) are confronted with and expected to adapt to: sudden and unpredictable large-scale changes of important parameters which are occurring more and more frequently, event propagation in networks with high degree of interconnectivity which leads to unforeseen fluctuations, and non-equilibrium states which increasingly characterize daily business. These multi-scale changes deeply influence logistic target achievement and call for robust planning and control strategies. Therefore, understanding the cause and effects of multi-scale changes in production networks is of major interest. New methodological approaches from different science disciplines are promising to contribute to a new level comprehension of network processes. Unconventional methods from biology, perturbation ecology or auditory display are gaining increasing importance as they are confronted with similar challenges. Advancements from the classical disciplines such as mathematics, physics and engineering are also becoming of continuing importance.

Download or read book Robust Process Control written by Manfred Morari and published by Morari. This book was released on 1989 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art study of computerized control of chemical processes used in industry, this book is for chemical engineering and industrial chemistry students involved in learning the micro-macro design of chemical process systems.

Download or read book Robust Control System Networks written by Ralph Langner and published by Momentum Press. This book was released on 2011-09-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the researcher who was one of the first to identify and analyze the infamous industrial control system malware "Stuxnet," comes a book that takes a new, radical approach to making Industrial control systems safe from such cyber attacks: design the controls systems themselves to be "robust." Other security experts advocate risk management, implementing more firewalls and carefully managing passwords and access. Not so this book: those measures, while necessary, can still be circumvented. Instead, this book shows in clear, concise detail how a system that has been set up with an eye toward quality design in the first place is much more likely to remain secure and less vulnerable to hacking, sabotage or malicious control. It blends several well-established concepts and methods from control theory, systems theory, cybernetics and quality engineering to create the ideal protected system. The book's maxim is taken from the famous quality engineer William Edwards Deming, "If I had to reduce my message to management to just a few words, I'd say it all has to do with reducing variation." Highlights include: - An overview of the problem of "cyber fragility" in industrial control systems - How to make an industrial control system "robust," including principal design objectives and overall strategic planning - Why using the methods of quality engineering like the Taguchi method, SOP and UML will help to design more "armored" industrial control systems.

Download or read book Optimal and Robust Control written by Luigi Fortuna and published by CRC Press. This book was released on 2012-02-02 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are many books on advanced control for specialists, there are few that present these topics for nonspecialists. Assuming only a basic knowledge of automatic control and signals and systems, Optimal and Robust Control: Advanced Topics with MATLAB® offers a straightforward, self-contained handbook of advanced topics and tools in automatic control. Techniques for Controlling System Performance in the Presence of Uncertainty The book deals with advanced automatic control techniques, paying particular attention to robustness—the ability to guarantee stability in the presence of uncertainty. It explains advanced techniques for handling uncertainty and optimizing the control loop. It also details analytical strategies for obtaining reduced order models. The authors then propose using the Linear Matrix Inequalities (LMI) technique as a unifying tool to solve many types of advanced control problems. Topics covered include: LQR and H-infinity approaches Kalman and singular value decomposition Open-loop balancing and reduced order models Closed-loop balancing Passive systems and bounded-real systems Criteria for stability control This easy-to-read text presents the essential theoretical background and provides numerous examples and MATLAB exercises to help the reader efficiently acquire new skills. Written for electrical, electronic, computer science, space, and automation engineers interested in automatic control, this book can also be used for self-study or for a one-semester course in robust control.

Download or read book Quality Control written by Pengzhong Li and published by BoD – Books on Demand. This book was released on 2021-03-24 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality control is changing along with the manufacturing environment. A series of revolutionary changes will occur in management contents, methods, capabilities, and real-time effectiveness and efficiency of management. As an essential factor in intelligent manufacturing, quality control systems require real and comprehensive innovation. Focused on new trends and developments in quality control from a worldwide perspective, this book presents the latest information on novel approaches in quality control. Its thirteen chapters cover three topics: intelligent manufacturing, robust design, and control charts.

Download or read book Nonlinear and Robust Control of PDE Systems written by Panagiotis D. Christofides and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in control of nonlinear partial differential equation (PDE) sys tems has been triggered by the need to achieve tight distributed control of transport-reaction processes that exhibit highly nonlinear behavior and strong spatial variations. Drawing from recent advances in dynamics of PDE systems and nonlinear control theory, control of nonlinear PDEs has evolved into a very active research area of systems and control. This book the first of its kind- presents general methods for the synthesis of nonlinear and robust feedback controllers for broad classes of nonlinear PDE sys tems and illustrates their applications to transport-reaction processes of industrial interest. Specifically, our attention focuses on quasi-linear hyperbolic and parabolic PDE systems for which the manipulated inputs and measured and controlled outputs are distributed in space and bounded. We use geometric and Lyapunov-based control techniques to synthesize nonlinear and robust controllers that use a finite number of measurement sensors and control actuators to achieve stabilization of the closed-loop system, output track ing, and attenuation of the effect of model uncertainty. The controllers are successfully applied to numerous convection-reaction and diffusion-reaction processes, including a rapid thermal chemical vapor deposition reactor and a Czochralski crystal growth process. The book includes comparisons of the proposed nonlinear and robust control methods with other approaches and discussions of practical implementation issues.

Download or read book Robust and Adaptive Control written by Eugene Lavretsky and published by Springer Science & Business Media. This book was released on 2012-11-13 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust and Adaptive Control shows the reader how to produce consistent and accurate controllers that operate in the presence of uncertainties and unforeseen events. Driven by aerospace applications the focus of the book is primarily on continuous-dynamical systems. The text is a three-part treatment, beginning with robust and optimal linear control methods and moving on to a self-contained presentation of the design and analysis of model reference adaptive control (MRAC) for nonlinear uncertain dynamical systems. Recent extensions and modifications to MRAC design are included, as are guidelines for combining robust optimal and MRAC controllers. Features of the text include: · case studies that demonstrate the benefits of robust and adaptive control for piloted, autonomous and experimental aerial platforms; · detailed background material for each chapter to motivate theoretical developments; · realistic examples and simulation data illustrating key features of the methods described; and · problem solutions for instructors and MATLAB® code provided electronically. The theoretical content and practical applications reported address real-life aerospace problems, being based on numerous transitions of control-theoretic results into operational systems and airborne vehicles that are drawn from the authors’ extensive professional experience with The Boeing Company. The systems covered are challenging, often open-loop unstable, with uncertainties in their dynamics, and thus requiring both persistently reliable control and the ability to track commands either from a pilot or a guidance computer. Readers are assumed to have a basic understanding of root locus, Bode diagrams, and Nyquist plots, as well as linear algebra, ordinary differential equations, and the use of state-space methods in analysis and modeling of dynamical systems. Robust and Adaptive Control is intended to methodically teach senior undergraduate and graduate students how to construct stable and predictable control algorithms for realistic industrial applications. Practicing engineers and academic researchers will also find the book of great instructional value.

Download or read book Engineering Methods for Robust Product Design written by William Y. Fowlkes and published by Prentice Hall. This book was released on 1995 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Design is the procedure used by design engineers to reduce the effects of order to produce the highest quality products possible. This book includes real life case studies focusing on mechanical, chemical and imaging design that illustrate potential problems and their solutions and offers WinRobust Lite software and practice problems.

Download or read book Robust Industrial Control Systems written by Michael J. Grimble and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems presents a comprehensive introduction to the use of frequency domain and polynomial system design techniques for a range of industrial control and signal processing applications. The solution of stochastic and robust optimal control problems is considered, building up from single-input problems and gradually developing the results for multivariable design of the later chapters. In addition to cataloguing many of the results in polynomial systems needed to calculate industrial controllers and filters, basic design procedures are also introduced which enable cost functions and system descriptions to be specified in order to satisfy industrial requirements. Providing a range of solutions to control and signal processing problems, this book: * Presents a comprehensive introduction to the polynomial systems approach for the solution of H_2 and H_infinity optimal control problems. * Develops robust control design procedures using frequency domain methods. * Demonstrates design examples for gas turbines, marine systems, metal processing, flight control, wind turbines, process control and manufacturing systems. * Includes the analysis of multi-degrees of freedom controllers and the computation of restricted structure controllers that are simple to implement. * Considers time-varying control and signal processing problems. * Addresses the control of non-linear processes using both multiple model concepts and new optimal control solutions. Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems is essential reading for professional engineers requiring an introduction to optimal control theory and insights into its use in the design of real industrial processes. Students and researchers in the field will also find it an excellent reference tool.

Download or read book Robust Control of Robots written by Adriano A. G. Siqueira and published by Springer Science & Business Media. This book was released on 2011-08-14 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control of Robots bridges the gap between robust control theory and applications, with a special focus on robotic manipulators. It is divided into three parts: robust control of regular, fully-actuated robotic manipulators; robust post-failure control of robotic manipulators; and robust control of cooperative robotic manipulators. In each chapter the mathematical concepts are illustrated with experimental results obtained with a two-manipulator system. They are presented in enough detail to allow readers to implement the concepts in their own systems, or in Control Environment for Robots, a MATLAB®-based simulation program freely available from the authors. The target audience for Robust Control of Robots includes researchers, practicing engineers, and graduate students interested in implementing robust and fault tolerant control methodologies to robotic manipulators.

Download or read book Robust Quality written by Rajesh Jugulum and published by CRC Press. This book was released on 2018-09-03 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historically, the term quality was used to measure performance in the context of products, processes and systems. With rapid growth in data and its usage, data quality is becoming quite important. It is important to connect these two aspects of quality to ensure better performance. This book provides a strong connection between the concepts in data science and process engineering that is necessary to ensure better quality levels and takes you through a systematic approach to measure holistic quality with several case studies. Features: Integrates data science, analytics and process engineering concepts Discusses how to create value by considering data, analytics and processes Examines metrics management technique that will help evaluate performance levels of processes, systems and models, including AI and machine learning approaches Reviews a structured approach for analytics execution

Download or read book Robust Control Design An Optimal Control Approach written by Feng Lin and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and accessible guide to the three main approaches to robust control design and its applications Optimal control is a mathematical field that is concerned with control policies that can be deduced using optimization algorithms. The optimal control approach to robust control design differs from conventional direct approaches to robust control that are more commonly discussed by firstly translating the robust control problem into its optimal control counterpart, and then solving the optimal control problem. Robust Control Design: An Optimal Control Approach offers a complete presentation of this approach to robust control design, presenting modern control theory in an concise manner. The other two major approaches to robust control design, the H_infinite approach and the Kharitonov approach, are also covered and described in the simplest terms possible, in order to provide a complete overview of the area. It includes up-to-date research, and offers both theoretical and practical applications that include flexible structures, robotics, and automotive and aircraft control. Robust Control Design: An Optimal Control Approach will be of interest to those needing an introductory textbook on robust control theory, design and applications as well as graduate and postgraduate students involved in systems and control research. Practitioners will also find the applications presented useful when solving practical problems in the engineering field.

Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.

Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2013-03-26 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.

Download or read book Robust Flight Control written by Jean-Francois Magni and published by Springer. This book was released on 1997-03-07 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: In October 1994, 22 organisations throughout Europe accepted a challenge to solve a specific robust flight control design problem. The results of that design challenge, presented at the GARTEUR Specialists' Workshop in Toulouse, France in April 1997, are reported here. Two flight control benchmarks are considered, based on the automatic landing phase of a large cargo aircraft and on the control of a military aircraft. Methods applied include: classical control; multi-objective optimisation; eigenstructure assignment; modal multi-model approach; LQ, Lyapunov and H¿-techniques; ¿-synthesis; nonlinear dynamic inversion; robust inverse dynamics estimation; model predictive control and following; and fuzzy control. Involved in the definition of the benchmarks and the evaluation process have been representatives from the European aeronautical industry, bringing a strong link with flight control law design practice.

Download or read book Design of Simple and Robust Process Plants written by J. L. A. Koolen and published by John Wiley & Sons. This book was released on 2001-10-15 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approaches to design process plants described in this book lead to process designs which require 30-40% less capital than usual. The book is unique since it is the first comprehensive work addressing both the total process design and operational approach. Technological developments during the last decade made the design of really competitive processes possible. Mechanical developments have resulted in reliable and robust equipment. Process developments have created opportunities to minimize the amount of equipment; furthermore, different logistic approaches, integration of process functionality and intensification of the unit operations are possible. Computer and control technology allows remote-control operation and first pass prime production. In this work design philosophies are discussed and their implementation is shown as a structured approach for planned and existing plants. Numerous examples are presented to illustrate what simple design can create. The work is intended for experienced engineers and managers involved in process design, control design and operation, but is also interesting for students. Project engineers and managers have to apply these new approaches to achieve competitive processes. "A process plant should meet the simplicity and robustness of a household refrigerator." This book has been written to allow to achieve this aim. "Chairman of the Judges Award" from IChemE 2003

Download or read book Advances in Production Technology written by Christian Brecher and published by Springer. This book was released on 2014-11-18 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”, held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.