Download or read book Robust Integral Backstepping Control of a Quadrotor Unmanned Aerial Vehicle written by and published by . This book was released on 2014 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the case of quadrotor unmanned aerial vehicle control, a non-linear model and robust integral backstepping control method is proposed to provide stabilization of attitude and motion under different assumptions and environmental uncertainties. The developed control method is robust to reject external disturbances and compensate for potential parameter uncertainties. This thesis investigates the advantages of a robust integral backstepping controller based on the plant model. An analysis of the benefits of the proposed control method is presented by comparison to classic linear control methods. This analysis is supported by simulation of a mathematical model and a physical prototype of the quadrotor system. The parameters and assumptions modeled match that of the constructed prototype to provide a consistent means of validation.

Download or read book Advanced Robust Nonlinear Control Approaches for Quadrotor Unmanned Aerial Vehicle written by Moussa Labbadi and published by Springer Nature. This book was released on 2021-09-14 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies selected advanced flight control schemes for an uncertain quadrotor unmanned aerial vehicle (UAV) systems in the presence of constant external disturbances, parametric uncertainties, measurement noise, time-varying external disturbances, and random external disturbances. Furthermore, in all the control techniques proposed in this book, it includes the simulation results with comparison to other nonlinear control schemes recently developed for the tracking control of a quadrotor UAV. The main contributions of the present book for quadrotor UAV systems are as follows: (i) the proposed control methods are based on the high-order sliding mode controller (SMC) and hybrid control algorithm with an optimization method. (ii) the finite-time control schemes are developed by using fast terminal SMC (FTSMC), nonsingular FTSMC (NFTSMC), global time-varying SMC, and adaptive laws. (iii) the fractional-order flight control schemes are developed by using the fractional-order calculus theory, super twisting algorithm, NFTSMC, and the SMC. This book covers the research history and importance of quadrotor system subject to system uncertainties, external wind disturbances, and noise measurements, as well as the research status of advanced flight control methods, adaptive flight control methods, and flight control based on fractional-order theory. The book would be interesting to most academic undergraduate, postgraduates, researchers on flight control for drones and applications of advanced controllers in engineering field. This book presents a must-survey for advanced finite-time control for quadrotor system. Some parts of this book have the potential of becoming the courses for the modelling and control of autonomous flying machines. Readers (academic researcher, undergraduate student, postgraduate student, MBA/executive, and education practitioner) interested in nonlinear control methods find this book an investigation. This book can be used as a good reference for the academic research on the control theory, drones, terminal sliding mode control, and related to this or used in Ph.D. study of control theory and their application in field engineering.

Download or read book Adaptive Hybrid Control of Quadrotor Drones written by Nihal Dalwadi and published by Springer Nature. This book was released on 2023-03-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the dynamics of a tail-sitter quadrotor and biplane quadrotor-type hybrid unmanned aerial vehicles (UAVs) and, based on it, various nonlinear controllers design like backstepping control (BSC), ITSMC (Integral Terminal Sliding Mode Control), and hybrid controller (BSC + ITSMC). It discusses single and multiple observer-based control strategies to handle external disturbances like wind gusts and estimate states. It covers the dynamics of slung load with a biplane quadrotor and a control architecture to handle the effect of partial rotor failure with wind gusts acting on it. An anti-swing control to prevent damage to the slung load and a deflecting surface-based total rotor failure compensation strategy to prevent damage to the biplane quadrotor are also discussed in this book. The monograph will be helpful for undergraduate and post-graduate students as well as researchers in their advanced studies.

Download or read book Robust Discrete Time Flight Control of UAV with External Disturbances written by Shuyi Shao and published by Springer Nature. This book was released on 2020-09-26 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies selected discrete-time flight control schemes for fixed-wing unmanned aerial vehicle (UAV) systems in the presence of system uncertainties, external disturbances and input saturation. The main contributions of this book for UAV systems are as follows: (i) the proposed integer-order discrete-time control schemes are based on the designed discrete-time disturbance observers (DTDOs) and the neural network (NN); and (ii) the fractional-order discrete-time control schemes are developed by using the fractional-order calculus theory, the NN and the DTDOs. The book offers readers a good understanding of how to establish discrete-time tracking control schemes for fixed-wing UAV systems subject to system uncertainties, external wind disturbances and input saturation. It represents a valuable reference guide for academic research on uncertain UAV systems, and can also support advanced / Ph.D. studies on control theory and engineering.

Download or read book Nonlinear and Fault tolerant Control Techniques for a Quadrotor Unmanned Aerial Vehicle written by Tong Li and published by . This book was released on 2011 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Aerial Vehicles (UAVs) have become more and more popular, and how to control them has become crucial. Although there are many different control methods that can be applied to the control of UAVs, nonlinear control techniques are more practical since the nonlinear features of most UAVs. In this thesis, as the first main contribution, three widely used nonlinear control techniques including Feedback Linearization Control (FLC), Sliding Mode Control (SMC), and Backstepping Control (BSC) are discussed, investigated, and designed in details and flight-tested on a unique quadrotor UAV (Qball-X4) test-bed available at the Networked Autonomous Vehicles (NAV) Lab in Concordia University. Each of these three control algorithms has its own features. The advantages and disadvantages are revealed through both simulation and experimental tests. Sliding mode control is well known for its capability of handling uncertainty, and is expected to be a robust controller on Qball-X4 UAV. Feedback linearization control and backstepping control are considered a bit weaker than sliding mode control. A comparison of these three controllers is carried out in both theoretical analysis and experimental results under same fault-free flight conditions. Testing results and comparison show the different features of different control methods, and provide a view on how to choose controller under a specific condition. Besides, safety and reliability of UAVs have been and will always be a critical issue in the aviation industry. Fault-Tolerant Control (FTC) has played an extremely important role towards UAVs' safety and reliability and the safety of group people if an unexpected crash occurred due to faults/damages of UAVs. Therefore, FTC has been a very active and quickly growing research and development field for UAVs and other safety-critical systems. Based on the use of sliding mode control technique, referred to as Fault-Tolerant SMC (FT-SMC) have been investigated, implemented, flight-tested and compared in the Qball-X4 test-bed and also simulation environment in both passive and active framework of FTC in the presence of different actuator faults/damages, as the second main contribution of this thesis work.

Download or read book Robust Formation Control for Multiple Unmanned Aerial Vehicles written by Hao Liu and published by CRC Press. This book was released on 2022-12-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the authors’ recent research results on formation control problems, including time-varying formation, communication delays, fault-tolerant formation for multiple UAV systems with highly nonlinear and coupled, parameter uncertainties, and external disturbances. Differentiating from existing works, this book presents a robust optimal formation approach to designing distributed cooperative control laws for a group of UAVs, based on the linear quadratic regulator control method and the robust compensation theory. The proposed control method is composed of two parts: the nominal part to achieve desired tracking performance and the robust compensation part to restrain the influence of highly nonlinear and strongly coupled parameter uncertainties, and external disturbances on the global closed-loop control system. Furthermore, this book gives proof of their robust properties. The influence of communication delays and actuator fault tolerance can be restrained by the proposed robust formation control protocol, and the formation tracking errors can converge into a neighborhood of the origin bounded by a given constant in a finite time. Moreover, the book provides details about the practical application of the proposed method to design formation control systems for multiple quadrotors and tail-sitters. Additional features include a robust control method that is proposed to address the formation control problem for UAVs and theoretical and experimental research for the cooperative flight of the quadrotor UAV group and the tail-sitter UAV group. Robust Formation Control for Multiple Unmanned Aerial Vehicles is suitable for graduate students, researchers, and engineers in the system and control community, especially those engaged in the areas of robust control, UAV swarming, and multi-agent systems.

Download or read book Intelligent Backstepping Control of Quadrotor Unmanned Aerial Vehicle written by Mohd. Ariffanan Mohd. Basri and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Backstepping Control of Quadrotors with Neural network written by Zhengqi Wang and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A quadrotor is a type of unmanned aerial vehicles. It has been widely used in aerial photography. The quadrotor has the capability of vertical takeoff and landing, which is very useful in small or narrow areas. The mechanical structure of a quadrotor is also simple, which makes it easy to produce and maintain. It is a strong candidate for a future means of transportation. In practical applications, it is commonly controlled by a proportional integral derivative controller. In this thesis, two nonlinear controllers are designed to control the attitude and the position of a quadrotor by using the backstepping technique. The attitude is estimated by a nonlinear attitude estimator, which is based on a nonlinear explicit complementary filter. It uses data from a six axis inertial measurement unit and a three axis magnetometer to calculate the estimated attitude. To avoid the singularity problem like "gimbal lock" in Euler angle attitude representation, the unit quaternion attitude representation is applied in the controller derivation. However, the Euler angle representation is easier for people to imagine the actual attitude of a quadrotor. To make it more readable, the results of the experiments are converted to the Euler angle representation. During the derivation of a backstepping controller, a neural-network is applied to estimate the nonlinear terms in the system. The universal approximation theorem is the principle for the estimation of nonlinear terms. Besides, a two step controller is derived by modifying the backstepping controller with four steps. The two step controller is developed by an adaptive method for both the nonlinear terms and the moment of inertia. Analysis shows the boundedness of the closed-loop system with both controllers. Finally, the proposed controllers are tested on a true quadrotor system. Experimental results show the effectiveness of the two proposed controllers. Also, comparison between two controllers are carried out. In addition, some future works are discussed.

Download or read book Adaptive Dynamic Programming Single and Multiple Controllers written by Ruizhuo Song and published by Springer. This book was released on 2018-12-28 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a class of novel optimal control methods and games schemes based on adaptive dynamic programming techniques. For systems with one control input, the ADP-based optimal control is designed for different objectives, while for systems with multi-players, the optimal control inputs are proposed based on games. In order to verify the effectiveness of the proposed methods, the book analyzes the properties of the adaptive dynamic programming methods, including convergence of the iterative value functions and the stability of the system under the iterative control laws. Further, to substantiate the mathematical analysis, it presents various application examples, which provide reference to real-world practices.

Download or read book Model Based Control of Flying Robots for Robust Interaction Under Wind Influence written by Teodor Tomić and published by Springer Nature. This book was released on 2022-10-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.

Download or read book Refined Safety Control of Unmanned Flight Vehicles via Fractional Order Calculus written by Ziquan Yu and published by CRC Press. This book was released on 2023-02-03 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monograph explores the safety of unmanned flight vehicles via the corresponding fault-tolerant control design methods. The authors analyse the safety control issues of unmanned flight vehicles, which include finite-time recovery against faults, concurrence of actuator faults and sensor faults, concurrence of actuator faults and wind effects, and faults encountered by a portion of unmanned flight vehicles in a distributed communication network. In addition, the commonly used simple but effective proportional-integral-derivative structure is also incorporated into the safety control design for unmanned flight vehicles. By using the fractional-order calculus, the developed safety control results are able to ensure flight safety and achieve the refined performance adjustments against faults and wind effects. The book will be of interest to 3rd/4th year undergraduate students, postgraduate and graduate students, researchers, academic staff, engineers of aircraft and unmanned flight vehicles.

Download or read book Proceedings of the 11th International Conference on Modelling Identification and Control ICMIC2019 written by Rui Wang and published by Springer Nature. This book was released on 2019-12-03 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 11th International Conference on Modelling, Identification and Control (ICMIC2019), held in Tianjin, China on July 13-15, 2019. The topics covered include but are not limited to: System Identification, Linear/Nonlinear Control Systems, Data-driven Modelling and Control, Process Modelling and Process Control, Fault Diagnosis and Reliable Control, Intelligent Systems, and Machine Learning and Artificial Intelligence.The papers showcased here share the latest findings on methodologies, algorithms and applications in modelling, identification, and control, integrated with Artificial Intelligence (AI), making the book a valuable asset for researchers, engineers, and university students alike.

Download or read book Unmanned Aerial Systems written by Anis Koubaa and published by Academic Press. This book was released on 2021-01-21 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Aerial Systems: Theoretical Foundation and Applications presents some of the latest innovative approaches to drones from the point-of-view of dynamic modeling, system analysis, optimization, control, communications, 3D-mapping, search and rescue, surveillance, farmland and construction monitoring, and more. With the emergence of low-cost UAS, a vast array of research works in academia and products in the industrial sectors have evolved. The book covers the safe operation of UAS, including, but not limited to, fundamental design, mission and path planning, control theory, computer vision, artificial intelligence, applications requirements, and more. This book provides a unique reference of the state-of-the-art research and development of unmanned aerial systems, making it an essential resource for researchers, instructors and practitioners. Covers some of the most innovative approaches to drones Provides the latest state-of-the-art research and development surrounding unmanned aerial systems Presents a comprehensive reference on unmanned aerial systems, with a focus on cutting-edge technologies and recent research trends in the area

Download or read book Advanced Sliding Mode Control for Mechanical Systems written by Jinkun Liu and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation" takes readers through the basic concepts, covering the most recent research in sliding mode control. The book is written from the perspective of practical engineering and examines numerous classical sliding mode controllers, including continuous time sliding mode control, discrete time sliding mode control, fuzzy sliding mode control, neural sliding mode control, backstepping sliding mode control, dynamic sliding mode control, sliding mode control based on observer, terminal sliding mode control, sliding mode control for robot manipulators, and sliding mode control for aircraft. This book is intended for engineers and researchers working in the field of control. Dr. Jinkun Liu works at Beijing University of Aeronautics and Astronautics and Dr. Xinhua Wang works at the National University of Singapore.

Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica

Download or read book Fractional Order Modeling of Dynamic Systems with Applications in Optimization Signal Processing and Control written by Ahmed G. Radwan and published by Academic Press. This book was released on 2021-10-22 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractional-order Modelling of Dynamic Systems with Applications in Optimization, Signal Processing and Control introduces applications from a design perspective, helping readers plan and design their own applications. The book includes the different techniques employed to design fractional-order systems/devices comprehensively and straightforwardly. Furthermore, mathematics is available in the literature on how to solve fractional-order calculus for system applications. This book introduces the mathematics that has been employed explicitly for fractional-order systems. It will prove an excellent material for students and scholars who want to quickly understand the field of fractional-order systems and contribute to its different domains and applications. Fractional-order systems are believed to play an essential role in our day-to-day activities. Therefore, several researchers around the globe endeavor to work in the different domains of fractional-order systems. The efforts include developing the mathematics to solve fractional-order calculus/systems and to achieve the feasible designs for various applications of fractional-order systems. Presents a simple and comprehensive understanding of the field of fractional-order systems Offers practical knowledge on the design of fractional-order systems for different applications Exposes users to possible new applications for fractional-order systems

Download or read book Robot Manipulator Control written by Frank L. Lewis and published by CRC Press. This book was released on 2003-12-12 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Manipulator Control offers a complete survey of control systems for serial-link robot arms and acknowledges how robotic device performance hinges upon a well-developed control system. Containing over 750 essential equations, this thoroughly up-to-date Second Edition, the book explicates theoretical and mathematical requisites for controls design and summarizes current techniques in computer simulation and implementation of controllers. It also addresses procedures and issues in computed-torque, robust, adaptive, neural network, and force control. New chapters relay practical information on commercial robot manipulators and devices and cutting-edge methods in neural network control.