Download or read book Proceedings of the International Conference on Engineering Applications of Mechanics Biomechanics written by Ali Meghdari and published by . This book was released on 1992 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotics and Manufacturing written by Mohammad Jamshidi and published by American Society of Mechanical Engineers. This book was released on 1990 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: The presentations of the technical papers in this volume have been grouped in accordance to specialized areas of robotics and manufacturing for easy access to the reader. The 145 technical papers cover topics in these important areas: Kinematics and Dynamics, Path and Task Planning, Sensors, Magnetic Levitation and Control Architectures, Robotic Control, Robots in Unstructured Environments, Redundant and Flexible Robots, Automated and Flexible Manufacturing, AI and Simulation, Dual and Mobile Robots, Education and Research, and Neural Networks and Learning.
Download or read book Robomatix Reporter written by and published by . This book was released on 1988 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive Control of Mechanical Manipulators written by John J. Craig and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Mobile Robot Control written by Spyros G Tzafestas and published by Elsevier. This book was released on 2013-10-03 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mobile Robot Control provides a complete and concise study of modeling, control, and navigation methods for wheeled non-holonomic and omnidirectional mobile robots and manipulators. The book begins with a study of mobile robot drives and corresponding kinematic and dynamic models, and discusses the sensors used in mobile robotics. It then examines a variety of model-based, model-free, and vision-based controllers with unified proof of their stabilization and tracking performance, also addressing the problems of path, motion, and task planning, along with localization and mapping topics. The book provides a host of experimental results, a conceptual overview of systemic and software mobile robot control architectures, and a tour of the use of wheeled mobile robots and manipulators in industry and society. Introduction to Mobile Robot Control is an essential reference, and is also a textbook suitable as a supplement for many university robotics courses. It is accessible to all and can be used as a reference for professionals and researchers in the mobile robotics field. - Clearly and authoritatively presents mobile robot concepts - Richly illustrated throughout with figures and examples - Key concepts demonstrated with a host of experimental and simulation examples - No prior knowledge of the subject is required; each chapter commences with an introduction and background
Download or read book Computer Control Abstracts written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Robotics and Applications written by Huayong Yang and published by Springer Nature. This book was released on 2023-10-15 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 9-volume set LNAI 14267-14275 constitutes the proceedings of the 16th International Conference on Intelligent Robotics and Applications, ICIRA 2023, which took place in Hangzhou, China, during July 5–7, 2023. The 413 papers included in these proceedings were carefully reviewed and selected from 630 submissions. They were organized in topical sections as follows: Part I: Human-Centric Technologies for Seamless Human-Robot Collaboration; Multimodal Collaborative Perception and Fusion; Intelligent Robot Perception in Unknown Environments; Vision-Based Human Robot Interaction and Application. Part II: Vision-Based Human Robot Interaction and Application; Reliable AI on Machine Human Reactions; Wearable Sensors and Robots; Wearable Robots for Assistance, Augmentation and Rehabilitation of Human Movements; Perception and Manipulation of Dexterous Hand for Humanoid Robot. Part III: Perception and Manipulation of Dexterous Hand for Humanoid Robot; Medical Imaging for Biomedical Robotics; Advanced Underwater Robot Technologies; Innovative Design and Performance Evaluation of Robot Mechanisms; Evaluation of Wearable Robots for Assistance and Rehabilitation; 3D Printing Soft Robots. Part IV: 3D Printing Soft Robots; Dielectric Elastomer Actuators for Soft Robotics; Human-like Locomotion and Manipulation; Pattern Recognition and Machine Learning for Smart Robots. Part V: Pattern Recognition and Machine Learning for Smart Robots; Robotic Tactile Sensation, Perception, and Applications; Advanced Sensing and Control Technology for Human-Robot Interaction; Knowledge-Based Robot Decision-Making and Manipulation; Design and Control of Legged Robots. Part VI: Design and Control of Legged Robots; Robots in Tunnelling and Underground Space; Robotic Machining of Complex Components; Clinically Oriented Design in Robotic Surgery and Rehabilitation; Visual and Visual-Tactile Perception for Robotics. Part VII: Visual and Visual-Tactile Perception for Robotics; Perception, Interaction, and Control of Wearable Robots; Marine Robotics and Applications; Multi-Robot Systems for Real World Applications; Physical and Neurological Human-Robot Interaction. Part VIII: Physical and Neurological Human-Robot Interaction; Advanced Motion Control Technologies for Mobile Robots; Intelligent Inspection Robotics; Robotics in Sustainable Manufacturing for Carbon Neutrality; Innovative Design and Performance Evaluation of Robot Mechanisms. Part IX: Innovative Design and Performance Evaluation of Robot Mechanisms; Cutting-Edge Research in Robotics.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotics Abstracts written by and published by . This book was released on 1990 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the USA Japan Symposium on Flexible Automation written by and published by . This book was released on 1988 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Nonlinear Control written by Jean-Jacques E. Slotine and published by . This book was released on 1991 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, the authors present a global perspective on the methods available for analysis and design of non-linear control systems and detail specific applications. They provide a tutorial exposition of the major non-linear systems analysis techniques followed by a discussion of available non-linear design methods.
Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.
Download or read book Algorithms and Architectures for Real time Control 1997 AARTC 97 written by António E. Ruano and published by Pergamon. This book was released on 1997 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the selection of papers presented at the IFAC Workshop on Algorithms and Architectures for Real-Time Control (AARTC '97) held at the Vilamoura Marina Hotel, Vilamoura, Portugal. Rapid developments in microelectronics and computer science continue to provide opportunities for real-time control engineers to address new challenges. New opportunities arise from such diverse directions as ever-increasing system complexity and sophistication, environmental legislation, economic competition, safety and reliability. These are typical themes which were highlighted at the IFAC AARTC '97 Workshop. The AARTC '97 Final Programme consisted of 22 sessions covering major areas of software, hardware and applications for real-time control. Important topics were "soft" computing methods, software tools and architectures, embedded systems, parallel and distributed systems, architectures, custom processors, algorithms, estimation methods, neural networks, fuzzy methods, PID controllers, transport applications, industrial process control, robotics, and discrete-event and hybrid systems.
Download or read book Robot Dynamics And Control written by Mark W Spong and published by John Wiley & Sons. This book was released on 2008-08-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained introduction to practical robot kinematics and dynamics includes a comprehensive treatment of robot control. It provides background material on terminology and linear transformations, followed by coverage of kinematics and inverse kinematics, dynamics, manipulator control, robust control, force control, use of feedback in nonlinear systems, and adaptive control. Each topic is supported by examples of specific applications. Derivations and proofs are included in many cases. The book includes many worked examples, examples illustrating all aspects of the theory, and problems.
Download or read book Proceedings of Manufacturing International 88 Symposium on manufacturing systems design integration and control written by and published by . This book was released on 1988 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
