Download or read book Robust Control of Robots written by Adriano A. G. Siqueira and published by Springer Science & Business Media. This book was released on 2011-08-14 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control of Robots bridges the gap between robust control theory and applications, with a special focus on robotic manipulators. It is divided into three parts: robust control of regular, fully-actuated robotic manipulators; robust post-failure control of robotic manipulators; and robust control of cooperative robotic manipulators. In each chapter the mathematical concepts are illustrated with experimental results obtained with a two-manipulator system. They are presented in enough detail to allow readers to implement the concepts in their own systems, or in Control Environment for Robots, a MATLAB®-based simulation program freely available from the authors. The target audience for Robust Control of Robots includes researchers, practicing engineers, and graduate students interested in implementing robust and fault tolerant control methodologies to robotic manipulators.
Download or read book Dynamics and Robust Control of Robot Environment Interaction written by Miomir Vukobratovic and published by World Scientific. This book was released on 2009 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most attractive problem in robot control, dealing with the direct interaction between a robot and a dynamic environment, including the human-robot physical interaction. It provides comprehensive theoretical and experimental coverage of interaction control problems, starting from the mathematical modeling of robots interacting with complex dynamic environments, and proceeding to various concepts for interaction control design and implementation algorithms at different control layers. Focusing on the learning principle, it also shows the application of new and advanced learning algorithms for robotic contact tasks.
Download or read book Adaptive Robust Control for Planar Snake Robots written by Joyjit Mukherjee and published by Springer Nature. This book was released on 2021-05-11 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how a conventional multi-layered approach can be used to control a snake robot on a desired path while moving on a flat surface. To achieve robustness to unknown variations in surface conditions, it explores various adaptive robust control methods. The authors propose a sliding-mode control approach designed to achieve robust maneuvering for bounded uncertainty with a known upper bound. The control is modified by addition of an adaptation law to alleviate the overestimation problem of the switching gain as well as to circumvent the requirement for knowledge regarding the bounds of uncertainty. The book works toward non-conservativeness, achieving efficient tracking in the presence of slowly varying uncertainties with a specially designed framework for time-delayed control. It shows readers how to extract superior performance from their snake robots with an approach that allows robustness toward bounded time-delayed estimation errors. The book also demonstrates how the multi-layered control framework can be simplified by employing differential flatness for such a system. Finally, the mathematical model of a snake robot moving inside a uniform channel using only side-wall contact is discussed. The model has further been employed to demonstrate adaptive robust control design for such a motion. Using numerous illustrations and tables, Adaptive Robust Control for Planar Snake Robots will interest researchers, practicing engineers and postgraduate students working in the field of robotics and control systems.
Download or read book Dynamics and Robust Control of Robot Environment Interaction written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Embedded Robust Control Systems Using MATLAB Simulink written by Petko Hristov Petkov and published by Control, Robotics and Sensors. This book was released on 2018 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the theoretical and practical aspects of embedded robust control design and implementation with the aid of MATLAB(R) and SIMULINK(R). It covers methods suitable for practical implementations, combining knowledge from control system design and computer engineering to describe the entire design cycle.
Download or read book Encyclopedia of Robust Control Volume II Novel Approaches written by Zac Fredericks and published by . This book was released on 2015-02-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantial information regarding the novel approaches in the field of robust control has been illustrated in this book. Robust control has been a topic of extensive research in the last three decades resulting in H_2/H_\infty and \mu design methods followed by studies on parametric robustness, earlier motivated by Kharitonov's theorem, the extension to non-linear time delay systems, and other recent methods. This book gives a broad overview of theoretical advances with the help of selected application examples. This book includes contributions by experts in this field from all over the world. It covers novel approaches in robust control. It also discusses problems in robust control theory and its functioning in electromechanical and robotic systems. This book serves as a complete guide for researchers, students and other interested individuals in the field of robotics and mechatronics.
Download or read book Learning for Adaptive and Reactive Robot Control written by Aude Billard and published by MIT Press. This book was released on 2022-02-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods by which robots can learn control laws that enable real-time reactivity using dynamical systems; with applications and exercises. This book presents a wealth of machine learning techniques to make the control of robots more flexible and safe when interacting with humans. It introduces a set of control laws that enable reactivity using dynamical systems, a widely used method for solving motion-planning problems in robotics. These control approaches can replan in milliseconds to adapt to new environmental constraints and offer safe and compliant control of forces in contact. The techniques offer theoretical advantages, including convergence to a goal, non-penetration of obstacles, and passivity. The coverage of learning begins with low-level control parameters and progresses to higher-level competencies composed of combinations of skills. Learning for Adaptive and Reactive Robot Control is designed for graduate-level courses in robotics, with chapters that proceed from fundamentals to more advanced content. Techniques covered include learning from demonstration, optimization, and reinforcement learning, and using dynamical systems in learning control laws, trajectory planning, and methods for compliant and force control . Features for teaching in each chapter: applications, which range from arm manipulators to whole-body control of humanoid robots; pencil-and-paper and programming exercises; lecture videos, slides, and MATLAB code examples available on the author’s website . an eTextbook platform website offering protected material[EPS2] for instructors including solutions.
Download or read book Robust Tracking Control of Robot Manipulators written by Zhihua Qu and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the latest research in the field, Robust Tracking Control of Robot Manipulators is the first book to provide systematic methods for stabilizing unwanted flexible, uncertain, and unmodeled dynamics. The authors present a thorough comparison of state-of-the-art and classical designs of all controls: linear or nonlinear (simple or complicated), conventional or robust, adaptive or learning. Focusing on control design and performance analysis, this book will help you to apply advanced controls effectively and to establish equivalent and different robustness. This book will be invaluable as a guide to researchers and practicing engineers in the field of robot control, automation, and robotic engineering. It will also serve as a useful reference for control of robot manipulators and mechanical-electrical systems.
Download or read book Local Stability and Ultimate Boundedness in the Control of Robot Manipulators written by Marco A. Arteaga and published by Springer Nature. This book was released on 2021-11-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique compendium of the authors ́ own research on the use of theoretical stability analysis, showing how to take advantage of local stability design and ultimate boundedness for practical robot control. It addresses researchers and postgraduate students dealing with control theory, particularly with nonlinear systems. Thanks to the numerous worked examples, it could also be used as a textbook in postgraduate courses.
Download or read book Modelling and Control written by P. Coiffet and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume in the series is based on part of a course that I taught in various state and private institutions during 1979 and 1980. It was concerned with the design and control of stationary, articulated robots operating as non-feedback systems. This book (which is devoted to the statement and understanding of problems rather than their solution) presents a review of some of the work, started in 1972, of the team involved with robotics and biomechanics at the Automation Laboratory at Montpellier, in association with the French National Centre for Scientific Research. I am greatly indebted to Professor A. Liegeois, the guiding light of the team, to A. Fournier, E. Dombre, W. Khalil, P. Molinier and P. Borrel who have contributed so much to the progress made in this field. The second volume will describe the present state of the knowledge of robotic systems which are able to perceive the environment, to a greater or lesser extent, and to react appropriately. Such robots will be able to perform the function required of them, in spite of unpredictable, limited changes in the environment. The third volume will deal with teleoperations, the branch of robotics characterized by the necessary and almost permanent presence of a human operator at the controls. The fourth volume will be concerned with technological components of robots and further volumes will discuss robotic languages and programming methods, decision autonomy and artificial intelligence and, finally, the computer-aided design of robots.
Download or read book Introduction to Mobile Robot Control written by Spyros G Tzafestas and published by Elsevier. This book was released on 2013-10-03 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mobile Robot Control provides a complete and concise study of modeling, control, and navigation methods for wheeled non-holonomic and omnidirectional mobile robots and manipulators. The book begins with a study of mobile robot drives and corresponding kinematic and dynamic models, and discusses the sensors used in mobile robotics. It then examines a variety of model-based, model-free, and vision-based controllers with unified proof of their stabilization and tracking performance, also addressing the problems of path, motion, and task planning, along with localization and mapping topics. The book provides a host of experimental results, a conceptual overview of systemic and software mobile robot control architectures, and a tour of the use of wheeled mobile robots and manipulators in industry and society. Introduction to Mobile Robot Control is an essential reference, and is also a textbook suitable as a supplement for many university robotics courses. It is accessible to all and can be used as a reference for professionals and researchers in the mobile robotics field. Clearly and authoritatively presents mobile robot concepts Richly illustrated throughout with figures and examples Key concepts demonstrated with a host of experimental and simulation examples No prior knowledge of the subject is required; each chapter commences with an introduction and background
Download or read book Robot Manipulator Control written by Frank L. Lewis and published by CRC Press. This book was released on 2003-12-12 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Manipulator Control offers a complete survey of control systems for serial-link robot arms and acknowledges how robotic device performance hinges upon a well-developed control system. Containing over 750 essential equations, this thoroughly up-to-date Second Edition, the book explicates theoretical and mathematical requisites for controls design and summarizes current techniques in computer simulation and implementation of controllers. It also addresses procedures and issues in computed-torque, robust, adaptive, neural network, and force control. New chapters relay practical information on commercial robot manipulators and devices and cutting-edge methods in neural network control.
Download or read book Robust Control of Elastic Robots written by Matthias Löhning and published by . This book was released on 2011 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cable Driven Parallel Robots written by Tobias Bruckmann and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering presentations to the First International Conference on Cable-Driven Parallel Robots, this book covers classification and definition, kinematics, workspace analysis, cable modeling, hardware/prototype development, control and calibration and more.
Download or read book Mechatronics 2017 written by Tomáš Březina and published by Springer. This book was released on 2017-08-16 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents nearly 90 carefully selected contributions at the 12th International Conference Mechatronics, which took place in Brno, Czech Republic on 6–8 September 2017. Reflecting the most progressive and constantly changing areas of mechatronics, these proceedings includes papers concerning modeling and simulation, automatic control, robotics, sensors and actuators, electrical machines, and energy harvesting. It not only offers inspiration, but also deepens readers’ interdisciplinary and integrated understanding of modern engineering. The book is intended for experts in the integration of electronic, mechanical, control and computer sciences.
Download or read book Parallel Robots written by Hamid D. Taghirad and published by CRC Press. This book was released on 2013-04-08 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel structures are more effective than serial ones for industrial automation applications that require high precision and stiffness, or a high load capacity relative to robot weight. Although many industrial applications have adopted parallel structures for their design, few textbooks introduce the analysis of such robots in terms of dynamics and control. Filling this gap, Parallel Robots: Mechanics and Control presents a systematic approach to analyze the kinematics, dynamics, and control of parallel robots. It brings together analysis and design tools for engineers and researchers who want to design and implement parallel structures in industry. Covers Kinematics, Dynamics, and Control in One Volume The book begins with the representation of motion of robots and the kinematic analysis of parallel manipulators. Moving beyond static positioning, it then examines a systematic approach to performing Jacobian analysis. A special feature of the book is its detailed coverage of the dynamics and control of parallel manipulators. The text examines dynamic analysis using the Newton-Euler method, the principle of virtual work, and the Lagrange formulations. Finally, the book elaborates on the control of parallel robots, considering both motion and force control. It introduces various model-free and model-based controllers and develops robust and adaptive control schemes. It also addresses redundancy resolution schemes in detail. Analysis and Design Tools to Help You Create Parallel Robots In each chapter, the author revisits the same case studies to show how the techniques may be applied. The case studies include a planar cable-driven parallel robot, part of a promising new generation of parallel structures that will allow for larger workspaces. The MATLAB® code used for analysis and simulation is available online. Combining the analysis of kinematics and dynamics with methods of designing controllers, this text offers a holistic introduction for anyone interested in designing and implementing parallel robots.
Download or read book Wheeled Mobile Robot Control written by Nardênio Almeida Martins and published by Springer Nature. This book was released on 2021-08-12 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development and methodologies of trajectory control of differential-drive wheeled nonholonomic mobile robots. The methodologies are based on kinematic models (posture and configuration) and dynamic models, both subject to uncertainties and/or disturbances. The control designs are developed in rectangular coordinates obtained from the first-order sliding mode control in combination with the use of soft computing techniques, such as fuzzy logic and artificial neural networks. Control laws, as well as online learning and adaptation laws, are obtained using the stability analysis for both the developed kinematic and dynamic controllers, based on Lyapunov’s stability theory. An extension to the formation control with multiple differential-drive wheeled nonholonomic mobile robots in trajectory tracking tasks is also provided. Results of simulations and experiments are presented to verify the effectiveness of the proposed control strategies for trajectory tracking situations, considering the parameters of an industrial and a research differential-drive wheeled nonholonomic mobile robot, the PowerBot. Supplementary materials such as source codes and scripts for simulation and visualization of results are made available with the book.
