Download or read book Robust Control of Dc dc Boost Converter written by Hisham Mahmood and published by . This book was released on 2008 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this thesis, a robust controller comprising of a PI with phase-lead compensator for a DC-DC boost converter designed using classical frequency response method is presented. The superior performance of this controller in comparison with H ∞ and passivity based integral controllers from the literature is shown. The robustness of the controller to boost converter parameter deviations, disturbance magnitudes and polarity which lead to worst case stability is investigated. This approach offers an alternative to the traditional unstructured uncertainty envelop approach used in the literature. Investigation into the nonlinearity arising from parasitic parameters in a boost converter is also presented in this thesis. It is shown that this nonlinearity can cause instability in boost converter control. This nonlinearity makes robust controller design difficult due to the sensitivity to disturbances. Static and dynamic voltage collapses are then studied. New non-iterative formulae are derived using the bilinear averaged model to calculate the voltage collapse point due to the parasitic parameters. Using these simple formulae boost converter stable operating region and disturbance limits can be calculated in the design phase. The use of these formulae for the design of the boost converter control system is studied. Static characteristics formula and the proposed controller performance are verified experimentally. "--Abstract.

Download or read book Robust Control of DC DC Converters written by Farzin Asadi and published by Springer Nature. This book was released on 2022-05-31 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC-DC converters require negative feedback to provide a suitable output voltage or current for the load. Obtaining a stable output voltage or current in the presence of disturbances like input voltage changes and/or output load changes seems impossible without some form of control. This book shows how simple controllers such as Proportional-Integral (PI) can turn into a robust controller by correct selection of its parameters. Kharitonov's theorem is an important tool toward this end. This book consist of two parts. The first part shows how one can obtain the interval plant model of a DC-DC converter. The second part introduces the Kharitonov's theorem. Kharitonov's theorem is an analysis tool rather than a design tool. Some case studies show how it can be used as a design tool. The prerequisite for reading this book is a first course on feedback control theory and power electronics.

Download or read book Robust Control of a Multi phase Interleaved Boost Converter for Photovoltaic Application Using synthesis Approach written by Badur Mueedh Alharbi and published by . This book was released on 2020 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high demand of energy efficiency has led to the development power converter topologies and control system designs within the field of power electronics. Recent advances of interleaved boost converters have showed improved features between the power conversion topologies in several aspects, including power quality, efficiency, sustainability and reliability. Interleaved boost converter with multi-phase technique for PV system is an attractive area for distributed power generation. During load variation or power supply changes due to the weather changes the output voltage requires a robust control to maintain stable and perform robustness. Connecting converters in series and parallel have the advantages of modularity, scalability, reliability, distributed location of capacitors which make it favorable in industrial applications. In this dissertation, a design of æ-synthesis controller is proposed to address the design specification of multi-phase interleaved boost converter at several power applications. This thesis contributes to the ongoing research on the IBC topology by proposing the modeling, applications uses and control techniques to the stability challenges. The research proposes a new strategy of robust control applied to a non-isolated DC/DC interleaved boost converter with a high step voltage ratio as multi-phase, multi-stage which is favorable for PV applications. The proposed controller is designed based on æ-synthesis technique to approach a high regulated output voltage, better efficiency, gain a fast regulation response against disturbance and load variation with a better dynamic performance and achieve robustness. The controller has been simulated using MATLAB/Simulink software and validated through experimental results which show the effectiveness and the robustness.

Download or read book Modeling Uncertainties in DC DC Converters with MATLAB and PLECS written by Farzin Asadi and published by Springer Nature. This book was released on 2022-06-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling is the process of formulating a mathematical description of the system. A model, no matter how detailed, is never a completely accurate representation of a real physical system. A mathematical model is always just an approximation of the true, physical reality of the system dynamics. Uncertainty refers to the differences or errors between model and real systems and whatever methodology is used to present these errors will be called an uncertainty model. Successful robust control-system design would depend on, to a certain extent, an appropriate description of the perturbation considered. Modeling the uncertainties in the switch mode DC-DC converters is an important step in designing robust controllers. This book studies different techniques which can be used to extract the uncertain model of DC-DC converters. Once the uncertain model is extracted, robust control techniques such as ∞ and μ synthesis can be used to design the robust controller. The book composed of two case studies. The first one is a buck converter and the second one is a Zeta converter. MATLAB® programming is used extensively throughout the book. Some sections use PLECS® as well. This book is intended to be guide for both academicians and practicing engineers.

Download or read book High Robust Control Schemes for Dual Active Bridge Based DC DC Converter Systems in Renewable Energy Applications written by NIE. HOU and published by Springer. This book was released on 2024-11-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Robust Control Schemes for Dual-Active-Bridge-Based DC-DC Converter Systems in Renewable Energy Applications is the first book that presents systematic control schemes for multiple DAB-based DC-DC converter systems. The book explores new control methods for various DAB DC-DC converters for high-power applications. These methods include fast-dynamic control, power balance control, soft start-up operation, hot-swap operation, and circuit-parameter estimation. Additionally, the book studies a DAB-based partial power processing DC-DC converter system designed to embed the renewable energy source and the energy storage system for boosting the utilization of components. The book also verifies the dynamic equivalence between the DAB converter and other intermediary inductive AC-link DC-DC converters, which can be helpful in designing control systems for other AC-link-based DC-DC converter systems. This book is a valuable reference for graduate students in electrical engineering, researchers, and power electronics engineers working in manufacturing, renewable energy, and utility industries. In addition, this book: Presents a systematic study of DAB-based converter systems; Highlights new control methods for DAB DC-DC converters for high-power applications; Examines embedding energy sources and storage systems to boost the utilization of renewable energy.

Download or read book Dynamics and Control of DC DC Converters written by Farzin Asadi and published by Morgan & Claypool Publishers. This book was released on 2018-03-08 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC-DC converters have many applications in the modern world. They provide the required power to the communication backbones, they are used in digital devices like laptops and cell phones, and they have widespread applications in electric cars, to just name a few. DC-DC converters require negative feedback to provide a suitable output voltage or current for the load. Obtaining a stable output voltage or current in presence of disturbances such as: input voltage changes and/or output load changes seems impossible without some form of control. This book tries to train the art of controller design for DC-DC converters. Chapter 1 introduces the DC-DC converters briefly. It is assumed that the reader has the basic knowledge of DC-DC converter (i.e., a basic course in power electronics). The reader learns the disadvantages of open loop control in Chapter 2. Simulation of DC-DC converters with the aid of Simulink® is discussed in this chapter as well. Extracting the dynamic models of DC-DC converters is studied in Chapter 3. We show how MATLAB® and a software named KUCA can be used to do the cumbersome and error-prone process of modeling automatically. Obtaining the transfer functions using PSIM® is studied as well. These days, softwares are an integral part of engineering sciences. Control engineering is not an exception by any means. Keeping this in mind, we design the controllers using MATLAB® in Chapter 4. Finally, references are provided at the end of each chapter to suggest more information for an interested reader. The intended audiences for this book are practice engineers and academians.

Download or read book Computer Techniques for Dynamic Modeling of DC DC Power Converters written by Farzin Asadi and published by Springer Nature. This book was released on 2022-06-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers play an important role in the analyzing and designing of modern DC-DC power converters. This book shows how the widely used analysis techniques of averaging and linearization can be applied to DC-DC converters with the aid of computers. Obtained dynamical equations may then be used for control design. The book is composed of two chapters. Chapter 1 focuses on the extraction of control-to-output transfer function. A second-order converter (a buck converter) and a fourth-order converter (a Zeta converter) are studied as illustrative examples in this chapter. Both ready-to-use software packages, such as PLECS® and MATLAB® programming, are used throught this chapter. The input/output characteristics of DC-DC converters are the object of considerations in Chapter 2. Calculation of input/output impedance is done with the aid of MATLAB® programming in this chapter. The buck, buck-boost, and boost converter are the most popular types of DC-DC converters and used as illustrative examples in this chapter. This book can be a good reference for researchers involved in DC-DC converters dynamics and control.

Download or read book Robust Control Design for Boost and Buck boost Converters written by Wael Bader and published by . This book was released on 2010 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 4th International Conference on Electrical Engineering and Control Applications written by Sofiane Bououden and published by Springer Nature. This book was released on 2020-09-29 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.

Download or read book Robust Linear Control of DC DC Converters written by Carlos Olalla Martínez and published by . This book was released on 2009 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Robust Control written by Andreas Müller and published by BoD – Books on Demand. This book was released on 2011-11-21 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust control has been a topic of active research in the last three decades culminating in H_2/H_\infty and \mu design methods followed by research on parametric robustness, initially motivated by Kharitonov's theorem, the extension to non-linear time delay systems, and other more recent methods. The two volumes of Recent Advances in Robust Control give a selective overview of recent theoretical developments and present selected application examples. The volumes comprise 39 contributions covering various theoretical aspects as well as different application areas. The first volume covers selected problems in the theory of robust control and its application to robotic and electromechanical systems. The second volume is dedicated to special topics in robust control and problem specific solutions. Recent Advances in Robust Control will be a valuable reference for those interested in the recent theoretical advances and for researchers working in the broad field of robotics and mechatronics.

Download or read book Robust Average Current mode Control of Boost DC DC Converters written by Su Ping Lim and published by . This book was released on 2005 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Towards Robust Control for DC DC Converters Supplying Challenging DC Microgrid Loads written by Kasper Jessen and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multivariable Feedback Control written by Sigurd Skogestad and published by John Wiley & Sons. This book was released on 2005-11-04 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multivariable Feedback Control: Analysis and Design, Second Edition presents a rigorous, yet easily readable, introduction to the analysis and design of robust multivariable control systems. Focusing on practical feedback control and not on system theory in general, this book provides the reader with insights into the opportunities and limitations of feedback control. Taking into account the latest developments in the field, this fully revised and updated second edition: * features a new chapter devoted to the use of linear matrix inequalities (LMIs); * presents current results on fundamental performance limitations introduced by RHP-poles and RHP-zeros; * introduces updated material on the selection of controlled variables and self-optimizing control; * provides simple IMC tuning rules for PID control; * covers additional material including unstable plants, the feedback amplifier, the lower gain margin and a clear strategy for incorporating integral action into LQG control; * includes numerous worked examples, exercises and case studies, which make frequent use of Matlab and the new Robust Control toolbox. Multivariable Feedback Control: Analysis and Design, Second Edition is an excellent resource for advanced undergraduate and graduate courses studying multivariable control. It is also an invaluable tool for engineers who want to understand multivariable control, its limitations, and how it can be applied in practice. The analysis techniques and the material on control structure design should prove very useful in the new emerging area of systems biology. Reviews of the first edition: "Being rich in insights and practical tips on controller design, the book should also prove to be very beneficial to industrial control engineers, both as a reference book and as an educational tool." Applied Mechanics Reviews "In summary, this book can be strongly recommended not only as a basic text in multivariable control techniques for graduate and undergraduate students, but also as a valuable source of information for control engineers." International Journal of Adaptive Control and Signal Processing

Download or read book Sliding Mode Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area.

Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by Springer Science & Business Media. This book was released on 2005-06-20 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.

Download or read book Advances in Robust Control and Applications written by Nabil Derbel and published by Springer Nature. This book was released on 2023-09-12 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents recent applications and developments in the field of control of industrial systems, covering a wide range of modeling and feedback control using various robust approaches such as fuzzy systems, sliding mode control, and H-infinity. This book provides insights into theory, applications, and perspectives relevant to the field of robotic systems, exoskeletons, power systems, photovoltaic systems, etc., as well as general methodologies and paradigms around them. Each chapter provides an enriched understanding of a research topic along with a balanced treatment of the relevant theories, methods, or applications. It reports on the latest advances in the field. This book is a good reference for graduate students, researchers, educators, engineers, and scientists and contains a total of 15 chapters divided into five parts as follows. The first part of this book focuses on the application of fuzzy control to robotic systems and consists of three chapters. The second part of this book proposes the control of lower and upper limb exoskeletons and includes two chapters. The third part is dedicated to the control of power systems and comprises three chapters. The fourth part deals with various approaches to the modeling and control of industrial processes and comprises four chapters. The fifth and final part describes observers and fault-tolerant control systems and comprises five chapters.