Download or read book Technical Economic and Societal Effects of Manufacturing 4 0 written by Mikael Collan and published by Palgrave Macmillan. This book was released on 2020-10-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is among the first cross-disciplinary works about Manufacturing 4.0. It includes chapters about the technical, the economic, and the social aspects of this important phenomenon. Together the material presented allows the reader to develop a holistic picture of where the manufacturing industry and the parts of the society that depend on it may be going in the future. Manufacturing 4.0 is not only a technical change, nor is it a purely technically driven change, but it is a societal change that has the potential to disrupt the way societies are constructed both in the positive and in the negative. This book will be of interest to scholars researching manufacturing, technological innovation, innovation management and industry 4.0.
Download or read book Advanced Human Robot Collaboration in Manufacturing written by Lihui Wang and published by Springer Nature. This book was released on 2021-06-10 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research, challenges and solutions in the area of human–robot collaboration (HRC) in manufacturing. It enables readers to better understand the dynamic behaviour of manufacturing processes, and gives more insight into on-demand adaptive control techniques for industrial robots. With increasing complexity and dynamism in today’s manufacturing practice, more precise, robust and practical approaches are needed to support real-time shop-floor operations. This book presents a collection of recent developments and innovations in this area, relying on a wide range of research efforts. The book is divided into five parts. The first part presents a broad-based review of the key areas of HRC, establishing a common ground of understanding in key aspects. Subsequent chapters focus on selected areas of HRC subject to intense recent interest. The second part discusses human safety within HRC. The third, fourth and fifth parts provide in-depth views of relevant methodologies and algorithms. Discussing dynamic planning and monitoring, adaptive control and multi-modal decision making, the latter parts facilitate a better understanding of HRC in real situations. The balance between scope and depth, and theory and applications, means this book appeals to a wide readership, including academic researchers, graduate students, practicing engineers, and those within a variety of roles in manufacturing sectors.
Download or read book Robotics in Smart Manufacturing written by Pedro Neto and published by Springer. This book was released on 2013-06-12 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Workshop on Robotics in Smart Manufacturing, WRSM 2013, held in Porto, Portugal, in June 2013. The 20 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers address issues such as robotic machining, off-line robot programming, robot calibration, new robotic hardware and software architectures, advanced robot teaching methods, intelligent warehouses, robot co-workers and application of robots in the textile industry.
Download or read book Implementation of Robot Systems written by Mike Wilson and published by Butterworth-Heinemann. This book was released on 2014-11-17 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's wide-ranging experience as a robot user, supplier and consultant, Implementation of Robot Systems will enable you to approach the use of robots in your plant or facility armed with the right knowledge base and awareness of critical factors to take into account.This book starts with the basics of typical applications and robot capabilities before covering all stages of successful robot integration. Potential problems and pitfalls are flagged and worked through so that you can learn from others' mistakes and plan proactively with possible issues in mind.Taking in content from the author's graduate level teaching of automation and robotics for engineering in business and his consultancy as part of a UK Government program to help companies advance their technologies and practices in the area, Implementation of Robot Systems blends technical information with critical financial and business considerations to help you stay ahead of the competition. - Includes case studies of typical robot capabilities and use across a range of industries, with real-world installation examples and problems encountered - Provides step-by-step coverage of the various stages required to achieve successful implementation, including system design, financial justification, working with suppliers and project management - Offers no-nonsense advice on the pitfalls and issues to anticipate, along with guidance on how to avoid or resolve them for cost and time-effective solutions
Download or read book Robotics for Electronics Manufacturing written by Karl Mathia and published by Cambridge University Press. This book was released on 2010-05-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the design, testing, and application of cleanroom robotics and automation with this practical guide. From the history and evolution of cleanroom automation to the latest applications and industry standards, this book provides the only complete overview of the topic available. With over 20 years' industry experience in robotics design, Karl Mathia provides numerous real-world examples to enable you to learn from professional experience, maximize the design quality and avoid expensive design pitfalls. You'll also get design guidelines and hands-on tips for reducing design time and cost. Compliance with industry and de-facto standards for design, assembly, and handling is stressed throughout, and detailed discussions of recommended materials for atmospheric and vacuum robots are included to help shorten product development cycles and avoid expensive material testing. This book is the perfect practical reference for engineers working with robotics for electronics manufacturing in a range of industries that rely on cleanroom manufacturing.
Download or read book Robotics in Practice written by Joseph F. Engelberger and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE REAL THING by Isaac Asimov Back in 1939, when I was still a teenager, I began to write (and publish) a series of stories about robots which, for the first time in science fiction, were pictured as having been deliberately engineered to do their job safely. They were not intended to be creaky Gothic menaces, nor outlets for mawkish sentiment. They were simply well-designed machines. Beginning in 1942, I crystallized this notion in what I called 'The Three Laws of Robotics' and, in 1950, nine of my robot stories were collected into a book, I, Robot. I did not at that time seriously believe that I would live to see robots in action and robotics becoming a booming industry .... Yet here we are, better yet, I am alive to see it. But then, why shouldn't they be with us? Robots fulfil an important role in industry. They do simple and repetitive jobs more steadily, more reliably, and more uncomplainingly than a human being could - or should. Does a robot displace a human being? Certainly, but he does so at a job that, simply because a robot can do it, is beneath the dignity of a human being; a job that is no more than mindless drudgery. Better and more human jobs can be found for human beings - and should.
Download or read book Industrial Robots written by Isak Karabegović and published by . This book was released on 2020 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Industrial Robots: Design, Applications and Technology is an essential reference source that explores the fundamentals of kinematics, dynamics and industrial robot control as well as a new generation of industrial robots, the collaborative robots or cobots. The tendency in Industry 4.0 towards the mass customisation of products, shorter product cycles and quality demands has led to the introduction of collaborative robot's systems capable of learning and working hand-in-hand with humans. Collaborative robots in the industry target the enhancement of production efficiency by combining the best of human operators and the industrial robots' accuracy, speed and reliability. The advances in smart sensors, artificial intelligence, digital twin, cyber-physical systems and the adoption of exoskeletons in industrial applications have opened new possibilities for technological progress in manufacturing, which led to efficient and flexible factories. This requires individuals to be educated in trends that are now focused on the design, monitoring and control of smart production processes. Featuring coverage on a wide range of topics such as new trends in human-robot collaboration, advanced vision technology and artificial intelligence, as well as application of industry robots in metal and wood industry, this book is ideally designed for electrical engineers, mechanical engineers, manufacturers, supply chain managers, logistics specialists, investors, managers, policymakers, production scientists, researchers, academicians and students at the postgraduate level"--
Download or read book Robots in Manufacturing written by Jack Baranson and published by . This book was released on 1983 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes: diagnosis & prescription; country studies; company profiles for selected AMES (automated equipment & systems) producers.
Download or read book Industrial Robot Handbook written by Richard K. Miller and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are exciting times for manufacturing engineers. It has been said that American industry will undergo greater changes during the 1980 and 1990 decades than it did during the entire eight preceding decades of this century. The industrial robot has become the symbol of this progress in computer-integrated manufacturing. This book is for engineers and managers in manufacturing industries who are involved in implementing robotics in their operations. With tens of thousands of industrial robots already in use in the United States, there are plenty of role models for proposed applications to be patterned after. This book provides an overview of robot applications and presents case histories that might suggest applications to engineers and managers for implementation in their own facilities. The application of industrial robots were well developed in the late 1970s and early 1980s. While the reader may note some of the examples discussed in this handbook incorporate older robot models, it is the application that is of interest. As Joseph Engelberger, the founding father of robotics has pointed out, industrial robots in 1988 are "doing pretty much the same kind of work" as they did in 1980.
Download or read book Industrial Robot Applications written by E. Appleton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardest data for managers and engineers in charge of the design and implementation of robot systems to acquire is also the most valuable: case studies detailing best current practice and the return on investment actually achieved. It has been a major goal of the British Robot Association, among other professional groups, to organise meetings where such case studies are presented and discussed between members; but the obvious restrictions of commercial confidentiality lead to considerable difficulty, especially in relation to the best recent installations. The authors of this book have been in the uniquely privileged position of lecturing in the Cambridge University Production Engineering Tripos, a course specially organised in conjunction with a number of leading companies applying robots and automation. Actual case studies from these companies form an important part of the course, making this book that has emerged from it a uniquely important addition to our Open University Press series.
Download or read book Manufacturing Robots written by Daniel R. Faust and published by The Rosen Publishing Group, Inc. This book was released on 2016-07-15 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most products we use every day were made using manufacturing robots. Readers will be surprised to hear how common and important robots are in the manufacturing world. This book covers the history of manufacturing robots, as well as the newest robots that are used today. The many benefits of manufacturing robots are explained, as well as controversies behind their use. Reader will learn the technology behind several manufacturing robots and how they've radically changed the way companies produce goods. Color photographs give an inside look at the jobs manufacturing robots do every day.
Download or read book Industrial Robots Programming written by J. Norberto Pires and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Robots Programming focuses on designing and building robotic manufacturing cells, and explores the capabilities of today’s industrial equipment as well as the latest computer and software technologies. Special attention is given to the input devices and systems that create efficient human-machine interfaces, and how they help non-technical personnel perform necessary programming, control, and supervision tasks. Drawing upon years of practical experience and using numerous examples and illustrative applications, J. Norberto Pires covers robotics programming as it applies to: The current industrial robotic equipment including manipulators, control systems, and programming environments. Software interfaces that can be used to develop distributed industrial manufacturing cells and techniques which can be used to build interfaces between robots and computers. Real-world applications with examples designed and implemented recently in the lab. Industrial Robots Programming has been selected for indexing by Scopus. For more information about Industrial Robotics, please find the author's Industrial Robotics collection at the iTunesU University of Coimbra channel.
Download or read book Recent Developments in Manufacturing Robotic Systems and Automation written by Dan Zhang and published by Bentham Science Publishers. This book was released on 2013-07-03 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an updated reference of research activities that bring together various theories, methods, and technologies of robotic systems and automation for manufacturing and related fields. The book includes articles on state-of-the-art robotic systems and automation for diverse avenues in automation such as advanced manufacturing, developments in design methodology, kinematics and dynamics analysis, performance analysis and evaluation, intelligent manufacturing, assembly, sensors, control theory and practice, human-machine interface, and so on. This book is an excellent research reference for engineers, researchers, and students that range from senior undergraduates to advanced doctoral students and professionals who are interested in robotics and automation.
Download or read book Industrial Robots written by Organisation for Economic Co-operation and Development and published by Paris, France : Organisation for Economic Co-operation and Development ; Washington, D.C. : OECD Publications and Information Center. This book was released on 1983 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robots in Industry written by Richard K. Miller and published by S E A I Technical Publications. This book was released on 1984 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robots and Robotics Principles Systems and Industrial Applications written by Rex Miller and published by McGraw Hill Professional. This book was released on 2017-07-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the principles and practices of industrial robotics Written by a pair of technology experts and accomplished educators, this comprehensive resource provides a solid foundation in applied industrial robotics and robot technology. You will get straightforward explanations of the latest components, techniques, and capabilities along with practical examples and detailed illustrations. The book takes a look at the entire field of robotics―from design and production to deployment, operation, and maintenance. Valuable appendices provide information on specific robot models, pendants, and controllers. Robots and Robotics: Principles, Systems and Industrial Applications covers: • Robot and robotics fundamentals • Identification of components • Robot parts and robotic motion capabilities • Programs, programming languages, and microprocessors • Drive systems, pumps, motors, and sensors • Control methods • Industrial applications • Specifications and capabilities • Troubleshooting and maintenance • Emerging technologies and the future of robotics
Download or read book Robotics for Electronics Manufacturing written by Karl Mathia and published by Cambridge University Press. This book was released on 2010-05-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the design, testing, and application of cleanroom robotics and get real-world examples and design tips with this practical guide.
