Download or read book Robotics Automation and Control in Industrial and Service Settings written by Luo, Zongwei and published by IGI Global. This book was released on 2015-09-10 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: ###############################################################################################################################################################################################################################################################
Download or read book Control Problems in Robotics and Automation written by Bruno Siciliano and published by Springer. This book was released on 2014-03-12 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the important control problems in state-of-the-art robotics and automation, this volume features invited papers from a workshop held at CDC, San Diego, California. As well as looking at current problems, it aims to identify and discuss challenging issues that are yet to be solved but which will be vital to future research directions. The many topics covered include: automatic control, distributed multi-agent control, multirobots, dexterous hands, flexible manipulators, walking robots, free-floating systems, nonholonomic robots, sensor fusion, fuzzy control, virtual reality, visual servoing, and task synchronization. Control Problems in Robotics and Automation will be of interest to all researchers, scientists and graduate students who wish to broaden their knowledge in robotics and automation and prepare themselves to address and resolve the control problems that will be faced in this field as we enter the twenty-first century.
Download or read book Robotics and Automation Handbook written by Thomas R. Kurfess and published by CRC Press. This book was released on 2018-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the capability and utility of robots has increased dramatically with new technology, robotic systems can perform tasks that are physically dangerous for humans, repetitive in nature, or require increased accuracy, precision, and sterile conditions to radically minimize human error. The Robotics and Automation Handbook addresses the major aspects of designing, fabricating, and enabling robotic systems and their various applications. It presents kinetic and dynamic methods for analyzing robotic systems, considering factors such as force and torque. From these analyses, the book develops several controls approaches, including servo actuation, hybrid control, and trajectory planning. Design aspects include determining specifications for a robot, determining its configuration, and utilizing sensors and actuators. The featured applications focus on how the specific difficulties are overcome in the development of the robotic system. With the ability to increase human safety and precision in applications ranging from handling hazardous materials and exploring extreme environments to manufacturing and medicine, the uses for robots are growing steadily. The Robotics and Automation Handbook provides a solid foundation for engineers and scientists interested in designing, fabricating, or utilizing robotic systems.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume II written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer Nature. This book was released on 2019-10-25 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to familiarize readers with the latest research on, and recent advances in, the field of Informatics in Control, Automation and Robotics. It gathers a selection of papers highlighting the state-of-the-art in Intelligent Control Systems, Optimization, Robotics and Automation, Signal Processing, Sensors, Systems Modelling and Control. Combining theoretical aspects with practical applications, the book offers a well-balanced overview of the latest achievements, and will provide researchers, engineers and PhD students with both a vital update and new inspirations for their own research.
Download or read book Robotics Automation and Control written by Pavla Pecherková and published by BoD – Books on Demand. This book was released on 2008-10-01 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was conceived as a gathering place of new ideas from academia, industry, research and practice in the fields of robotics, automation and control. The aim of the book was to point out interactions among various fields of interests in spite of diversity and narrow specializations which prevail in the current research. The common denominator of all included chapters appears to be a synergy of various specializations. This synergy yields deeper understanding of the treated problems. Each new approach applied to a particular problem can enrich and inspire improvements of already established approaches to the problem.
Download or read book Control Engineering in Robotics and Industrial Automation written by Muralindran Mariappan and published by Springer Nature. This book was released on 2021-08-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first research collection by the Malaysian Society for Automatic Control Engineers (MACE). Numerous applications of control engineering, sensor, and instrumentation technology in robotics, industrial automation, and other mechatronic systems are presented in this book. The book begins by introducing control engineering in robotics and industrial automation. It progresses through a series of chapters, discussing the application of control engineering in various areas such as: brake-by-wire technology; web scrubber systems; robot localization; and, autonomous navigation systems. Coverage of swarm robotics behaviors and applications of sensor technology in the field of music, biomedical technology, and structural analysis takes the book beyond its core of mechatronic systems and demonstrates a more diverse application of the ideas it presents. Each chapter provides comprehensive and detailed coverage of the main ideas, design methods, and practical needs of its chosen topic, making this book accessible and useful to researchers, engineers, postgraduates, and undergraduate students.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Robotics Vision and Control written by Peter Corke and published by Springer. This book was released on 2011-09-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, then camera models, image processing, feature extraction and epipolar geometry, and bring it all together in a visual servo system. Additional material is provided at http://www.petercorke.com/RVC
Download or read book Intelligent Control of Robotic Systems written by D. Katic and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: As robotic systems make their way into standard practice, they have opened the door to a wide spectrum of complex applications. Such applications usually demand that the robots be highly intelligent. Future robots are likely to have greater sensory capabilities, more intelligence, higher levels of manual dexter ity, and adequate mobility, compared to humans. In order to ensure high-quality control and performance in robotics, new intelligent control techniques must be developed, which are capable of coping with task complexity, multi-objective decision making, large volumes of perception data and substantial amounts of heuristic information. Hence, the pursuit of intelligent autonomous robotic systems has been a topic of much fascinating research in recent years. On the other hand, as emerging technologies, Soft Computing paradigms consisting of complementary elements of Fuzzy Logic, Neural Computing and Evolutionary Computation are viewed as the most promising methods towards intelligent robotic systems. Due to their strong learning and cognitive ability and good tolerance of uncertainty and imprecision, Soft Computing techniques have found wide application in the area of intelligent control of robotic systems.
Download or read book Robotics written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the successful Modelling and Control of Robot Manipulators by Sciavicco and Siciliano (Springer, 2000), Robotics provides the basic know-how on the foundations of robotics: modelling, planning and control. It has been expanded to include coverage of mobile robots, visual control and motion planning. A variety of problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained. The text includes coverage of fundamental topics like kinematics, and trajectory planning and related technological aspects including actuators and sensors. To impart practical skill, examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, end-of-chapter exercises are proposed, and the book is accompanied by an electronic solutions manual containing the MATLAB® code for computer problems; this is available free of charge to those adopting this volume as a textbook for courses.
Download or read book Robotics and Automation in the Food Industry written by Darwin G Caldwell and published by Elsevier. This book was released on 2012-12-03 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of robotics and automation in the food sector offers great potential for improved safety, quality and profitability by optimising process monitoring and control. Robotics and automation in the food industry provides a comprehensive overview of current and emerging technologies and their applications in different industry sectors.Part one introduces key technologies and significant areas of development, including automatic process control and robotics in the food industry, sensors for automated quality and safety control, and the development of machine vision systems. Optical sensors and online spectroscopy, gripper technologies, wireless sensor networks (WSN) and supervisory control and data acquisition (SCADA) systems are discussed, with consideration of intelligent quality control systems based on fuzzy logic. Part two goes on to investigate robotics and automation in particular unit operations and industry sectors. The automation of bulk sorting and control of food chilling and freezing is considered, followed by chapters on the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery. Automatic control of batch thermal processing of canned foods is explored, before a final discussion on automation for a sustainable food industry.With its distinguished editor and international team of expert contributors, Robotics and automation in the food industry is an indispensable guide for engineering professionals in the food industry, and a key introduction for professionals and academics interested in food production, robotics and automation. - Provides a comprehensive overview of current and emerging robotics and automation technologies and their applications in different industry sectors - Chapters in part one cover key technologies and significant areas of development, including automatic process control and robotics in the food industry and sensors for automated quality and safety control - Part two investigates robotics and automation in particular unit operations and industry sectors, including the automation of bulk sorting and the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery
Download or read book Informatics in Control Automation and Robotics written by Kurosh Madani and published by Springer. This book was released on 2017-11-02 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the latest advances in research and development in the field of informatics in control, robotics and automation. With more than twenty revised and extended articles covering the theoretical aspects as well as applications and their implementation, it offers a factual and well-balanced overview of the state of the art in the field. In addition, it highlights the trends in control of intelligent robots. The book is an up-to-date source of information and inspiration for researchers, engineers and PhD students.
Download or read book Control in Robotics and Automation written by Bhaskar Kumar Ghosh and published by Academic Press. This book was released on 1999 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control in Robotics and Automation has been written to meet the rapidly growing need for sensor-based integration to solve problems in the control and planning of robotic systems. Applications of these control methods range from assembly tasks in industrial automation to material handling in hazardous environments and servicing tasks in space. Many advances in a wide range of new applications in robotics and automation will depend on methods presented in this book, including robot-assisted surgery, space exploration, and micro-fabrication.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Automatic Control Robotics and Information Processing written by Piotr Kulczycki and published by Springer Nature. This book was released on 2020-09-03 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a wide and comprehensive range of issues and problems in various fields of science and engineering, from both theoretical and applied perspectives. The desire to develop more effective and efficient tools and techniques for dealing with complex processes and systems has been a natural inspiration for the emergence of numerous fields of science and technology, in particular control and automation and, more recently, robotics. The contributions gathered here concern the development of methods and algorithms to determine best practices regarding broadly perceived decisions or controls. From an engineering standpoint, many of them focus on how to automate a specific process or complex system. From a tools-based perspective, several contributions address the development of analytic and algorithmic methods and techniques, devices and systems that make it possible to develop and subsequently implement the automation and robotization of crucial areas of human activity. All topics discussed are illustrated with sample applications.
Download or read book Advances in Automation and Robotics Research written by Héctor A. Moreno and published by Springer Nature. This book was released on 2021-11-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 3rd Latin American Congress on Automation and Robotics, held at Monterrey, Mexico, on November 17–19, 2021. This book presents recent advances in the modeling, design, control, and development of autonomous and robotic systems and explores current exciting applications and future challenges of these technologies. The scope of this book covers a wide range of research fields associated with automation and robotics encountered within engineering, scientific research, and practice. These topics are related to autonomous systems, industrial automation and robotics, modelling and systems identification, simulation procedures and experimental validations, control theory, artificial intelligence, computer vision, sensing and sensor fusion, multi-robot and multi-agent systems, field and service robotics, human robot interaction and interfaces, modelling of robotic systems, and the design of new robotic platforms.
