Download or read book Robotics and Artificial Intelligence written by Michael Brady and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Lester A. Gerhardt Professor and Chairman Electrical, Computer, and Systems Engineering Rensselaer Polytechnic Institute Troy, New York 12180 This book is a collection of papers on the subject of Robotics and Artificial Intelligence. Most of the papers contained herein were presented as part of the program of the NATO Advanced Study Institute held in June 1983 at Castel vecchio Pascoli, Italy on the same subject. Attendance at this two week Institute was by invitation only, drawing people internationally representing industry, government and the academic community worldwide. Many of the people in attendance, as well as those presenting papers, are recognized leaders in the field. In addition to the formal paper presentations, there were several informal work shops. These included a workshop on sensing, a workshop on educational methodology in the subject area, as examples. This book is an outgrowth and direct result of that Institute and includes the papers presented as well as a few others which were stimulated by that meeting. A special note is the paper entitled "State-of-the-Art and Predictions for Artificial Intelligence and Robotics" by Dr. R. Nagel which appears in the Introduction and Overview chapter of this book. This paper was originally developed as part of a study for the United States Army performed by the National Research Council of the National Academy of Science and published as part of a report entitled "Applications of Robotics and Artificial Intelligence to Reduce Risk and Improve Effectiveness" by National Academy Press in 1983.

Download or read book Computer Integrated Manufacturing Handbook written by V.D. Hunt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing has entered the early stages of a revolutionary period caused by the convergence of three powerful trends: • The rapid advancement and spread of manufacturing capabilities worldwide has created intense competition on a global scale. • The emergence of advanced manufacturing technologies is dramati cally changing both the products and processes of modern manufac turing. • Changes in traditional management and labor practices, organiza tional structures, and decision-making criteria represent new sources of competitiveness and introduce new strategic opportunities. These trends are interrelated and their effects are already being felt by the u.s. manufacturing community. Future competitiveness for manu facturers worldwide will depend on their response to these trends. Based on the recent performance of u.s. manufacturers, efforts to respond to the challenges posed by new competition, technology, and managerial opportunities have been slow and inadequate. Domestic markets that were once secure have been assailed by a growing number of foreign competitors producing high quality goods at low prices. In a number of areas, such as employment, capacity utilization, research and development expenditures, and capital investment, trends in u.s. manufacturing over the last decade have been unfavorable or have not kept pace with major foreign competitors, such as Japan. There is substantial evidence that many u.s. manufacturers have neglected the manufacturing function, have overemphasized product development at the expense of process improvements, and have not begun to make the adjustments that will be necessary to be competitive.

Download or read book Computer Integrated Manufacturing written by Kiyoji Asai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Current state of expectations is that Computer Integrated Manufacturing (CIM) will ulti mately determine the industrial growth of world nations within the next few decades. Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS), Robotics together with Knowledge and Information Based Systems (KIBS) and Com munication Networks are expected to develop to a mature state to respond effectively to the managerial requirements of the factories of the future that are becoming highly integrated and complex. CIM represents a new production approach which will allow the factories to deliver a high variety of products at a low cost and with short production cycles. The new technologies for CIM are needed to develop manufacturing environments that are smarter, faster, close-cou pled, integrated, optimized, and flexible. Sophistication and a high degree of specialization in materials science, artificial intelligence, communications technology and knowledge-information science techniques are needed among others for the development of realizable and workable CIM systems that are capable of adjusting to volatile markets. CIM factories are to allow the production of a wide variety of similar products in small batches through standard but multi mission oriented designs that accommodate flexibility with specialized software.

Download or read book Computer Integrated Manufacturing written by Alan Weatherall and published by Butterworth-Heinemann. This book was released on 2013-09-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Integrated Manufacturing: From Fundamentals to Implementation is based on a course in computer integrated manufacturing (CIM) which is part of the Production Engineering Tripos for postgraduate-level students at Cambridge University. The book is intended to provide a thorough coverage of a difficult subject, and to communicate principles as well as something of current practice. This should give a firm basis of knowledge in CIM, and develop an understanding that will be valid for many years in changing business and manufacturing environments. The book covers CIM and manufacturing systems at a technical level, from description of the conventional ""islands of computerization"" to the components of CIM architecture. The business objectives of CIM are described, from analysis of the business environment to cost justification and implementation of CIM systems. CIM is seen as a business tool and not as an end in itself. Each individual and company needs to adapt the tools described in this book to best effect. Study of this book should enable postgraduate students and professional engineers to deal confidently with the subject and use CIM techniques profitably.

Download or read book Design and Implementation of Intelligent Manufacturing Systems written by Mohammed Jamshidi and published by Pearson Education. This book was released on 1995-05-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of artificial intelligence, neural networks, and fuzzy logic into industry has given a new perspective to manufacturing processes in the U.S. and abroad. To help readers keep pace, this book addresses topics of intelligent manufacturing from a variety of theoretical, empirical, design, and implementation perspectives.

Download or read book Computer Integrated Manufacturing written by United States. Army Materiel Command and published by . This book was released on 1988 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CAD CAM Robotics and Factories of the Future written by Dipak Kumar Mandal and published by Springer. This book was released on 2016-01-05 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is based on the proceedings of the 28th International Conference on CAD/CAM, Robotics and Factories of the Future. This book specially focuses on the positive changes made in the field of robotics, CAD/CAM and future outlook for emerging manufacturing units. Some of the important topics discussed in the conference are product development and sustainability, modeling and simulation, automation, robotics and handling systems, supply chain management and logistics, advanced manufacturing processes, human aspects in engineering activities, emerging scenarios in engineering education and training. The contents of this set of proceedings will prove useful to both researchers and practitioners.

Download or read book Robots Drones UAVs and UGVs for Operation and Maintenance written by Diego Galar and published by CRC Press. This book was released on 2020-05-07 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial assets (such as railway lines, roads, pipelines) are usually huge, span long distances, and can be divided into clusters or segments that provide different levels of functionality subject to different loads, degradations and environmental conditions, and their efficient management is necessary. The aim of the book is to give comprehensive understanding about the use of autonomous vehicles (context of robotics) for the utilization of inspection and maintenance activities in industrial asset management in different accessibility and hazard levels. The usability of deploying inspection vehicles in an autonomous manner is explained with the emphasis on integrating the total process. Key Features Aims for solutions for maintenance and inspection problems provided by robotics, drones, unmanned air vehicles and unmanned ground vehicles Discusses integration of autonomous vehicles for inspection and maintenance of industrial assets Covers the industrial approach to inspection needs and presents what is needed from the infrastructure end Presents the requirements for robot designers to design an autonomous inspection and maintenance system Includes practical case studies from industries

Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1991 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Artificial Intelligence for Human Computer Interaction A Modern Approach written by Yang Li and published by Springer Nature. This book was released on 2021-11-04 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book explores the many interesting questions that lie at the intersection between AI and HCI. It covers a comprehensive set of perspectives, methods and projects that present the challenges and opportunities that modern AI methods bring to HCI researchers and practitioners. The chapters take a clear departure from traditional HCI methods and leverage data-driven and deep learning methods to tackle HCI problems that were previously challenging or impossible to address. It starts with addressing classic HCI topics, including human behaviour modeling and input, and then dedicates a section to data and tools, two technical pillars of modern AI methods. These chapters exemplify how state-of-the-art deep learning methods infuse new directions and allow researchers to tackle long standing and newly emerging HCI problems alike. Artificial Intelligence for Human Computer Interaction: A Modern Approach concludes with a section on Specific Domains which covers a set of emerging HCI areas where modern AI methods start to show real impact, such as personalized medical, design, and UI automation.

Download or read book Smart Robots written by V. Hunt and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is one of the first really thorough presentations on smart robots. Robots, machine vision systems, sensors, manipulators, expert systems, and artificial intelligence concepts combined in state-of-the-art computer integrated manufacturing systems. These "smart" robots increase produc tivity and improve the quality of our products. This comprehensive volume, which is extensively illustrated, provides a unique synthesis and overview of the emerging field of smart robots, the basic approaches for each of the constituents systems, the techniques used, applications, the descriptions of current hardware or software projects, a review of the state-of-the-art of the technology, current research and development efforts, and trends in the development of smart robots. All of the information has been compiled from a wide variety of knowledgeable sources and recent government reports. An extensive selection of photo graphs, diagrams and charts amplify this book. The contents of major chapters include: • Introduction to smart robots • Artificial intelligence for smart robots • Smart robot systems • Sensor-controlled robots • Machine vision systems • Robot manipulators • Natural language processing • Expert systems and • Computer integrated manufacturing Smart Robots presents the state-of-the-art in intelligent robots. It is designed to help the reader develop an understanding of industrial applications of smart robots as well as the new technological develop ments. Smart Robots is an outstanding introduction to the integration and application of machine vision systems, sensors, expert systems, and artificial intelligence technology.

Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.

Download or read book Robots Artificial Intelligence and Service Automation in Travel Tourism and Hospitality written by Stanislav Ivanov and published by Emerald Group Publishing. This book was released on 2019-10-14 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a combination of theoretical discussion and real-world case studies, this book focuses on current and future use of RAISA technologies in the tourism economy, including examples from the hotel, restaurant, travel agency, museum, and events industries.

Download or read book COMPUTER INTEGRATED MANUFACTURING written by ALAVUDEEN, A. and published by PHI Learning Pvt. Ltd.. This book was released on 2008-08-18 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date and accessible text deals with the basics of Computer Integrated Manufacturing (CIM) and the many advances made in the field. It begins with a discussion on automation systems, and gives the historical background of many of the automation technologies. Then it moves on to describe the various techniques of automation such as group technology and flexible manufacturing systems. The text describes several production techniques, for example, just-in-time (JIT), lean manufacturing and agile manufacturing, besides explaining in detail database systems, machine functions, and design considerations of Numerical Control (NC) and Computer Numerical Control (CNC) machines, and how the CIM system can be modelled. The book concludes with a discussion on the industrial application of artificial intelligence with the help of case studies, in addition to giving network application and signalling approaches. Intended primarily as a text for the undergraduate and graduate students of mechanical, production, and industrial engineering and management, the text should also prove useful for the professionals in the field.

Download or read book Computer Aided and Integrated Manufacturing Systems written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene. The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved. Contents: .: Neural Networks Techniques for the Optical Inspection of Machined Parts (N Guglielmi et al.); Computer Techniques and Applications of Automated Process Planning in Manufacturing Systems (K A Aldakhilallah & R Ramesh); Internet-Based Manufacturing Systems: Techniques and Applications (H Lau); and other articles. Readership: Graduate students, academics, researchers, and industrialists in computer engineering, industrial engineering, mechanical engineering, systems engineering, artificial intelligence and operations management

Download or read book Theory of Automatic Robot Assembly and Programming written by B.O. Nnaji and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines will gradually become programmed using computers which have the knowledge of how the objects in the world relate to one another. This book capitalizes on the fact that products which are manufactured can be designed on the computer and that information about the product such as its physical shape provide powerful information to reason about how to develop the process plan for their manufacture. This book explores the whole aspect of using the principles of how parts behave naturally to automatically generate programs that govern how to produce them. The last decade saw tremendous work on how machines can be programmed to perform a variety of tasks automatically. Robotics has witnessed the most work on programming techniques. But it was not until the emergence of the advanced CAD system as a proper source of information representation about objects which are to be manipulated by the robot that it became viable for automated processors to generate robot programs without human interface. It became possible for objects to be described and for principles about how they interact in the world to be developed. The functions which the features designed into the objects serve for the objects can be adequately represented and used in reasoning about the manufacturing of the parts using the robot. This book describes the necessary principles which must be developed for a robot to generate its own programs with the knowledge of the world in the CAD system.

Download or read book Computer Aided and Integrated Manufacturing Systems Intelligent systems technologies written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.