Download or read book Robotic Arm Manipulator with Haptic Feedback Using Progammable System on Chip written by Muhammad Yaqoob and published by GRIN Verlag. This book was released on 2013-11-27 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bachelor Thesis from the year 2012 in the subject Engineering - Robotics, grade: A, National University of Sciences & Technology (NUST School of Electrical Engineering and Computer Science), language: English, abstract: Haptic Feedback systems are used to sense the vibrations, touch and force in many real world problems for example gaming, virtual reality, mobiles, automotive industry and robotic surgery. Our work involves the design and development of a robotic arm at slave end which includes force and current sensors that allows the operator to get force feedback at the master end. Three methods of feedback are generally used i.e. Force Sensitive Resistors for object detection, Current Sensing for force feedback and Position estimation to replicate motion. The three mentioned methods are analyzed using graphs developed on the PC. Graphs are obtained by experiments on the gripper by using different objects. Master-Slave topology is used to attain some benefits over conventional control systems in term of ergonomics, accuracy and timing etc. There is an interactive GUI at master end to show us forces, size and motions at each joint of the slave unit. Along with the interactive GUI at master side, yaw and pitch motion of slave is also replicated at master end using master controller
Download or read book Robot Hands and Multi fingered Haptic Interfaces written by Haruhisa Kawasaki and published by World Scientific Publishing Company Incorporated. This book was released on 2015 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Hands and Multi-Fingered Haptic Interfaces is a monograph focusing on the comparison of human hands with robot hands, the fundamentals behind designing and creating the latter, and robotics' latest advancements in haptic technology.This work discusses the design of robot hands; contact models at grasping; kinematic models of constraint; dynamic models of the multi-fingered hand; the stability theorem of non-linear control systems; robot hand control; design and control of multi-fingered haptic interfaces; application systems using multi-fingered haptic interfaces; and telecontrol of robot hands using a multi-fingered haptic interface.Robot Hands and Multi-Fingered Haptic Interfaces is intended mainly for readers who have a foundation in basic robot arm engineering. To understand robot hand manipulation, readers must study kinematic constraint models of fingers, hand dynamics with constraints, stability theorems of non-linear control, and multi-fingered hand control -- this book will benefit readers' understanding of this full range of issues regarding robot hand manipulation.
Download or read book Dual 7 Degree Of Freedom Robotic Arm Remote Teleoperation Using Haptic Devices written by Yu-Cheng Wang and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A teleoperated system of dual redundant manipulator will be controlled in this thesis. The robot used with the dual redundant manipulator in this thesis is Baxter. Baxter's redundant robot arms are 7-degree-of-freedom arms. The problem that will be solved in this thesis is optimization of the 7-degree-of-freedom robot arms. The control algorithm of the 7-degree-of-freedom robot arms will be discussed and built. A simulation program will be built to test the control algorithm. Based on the control algorithm, a teleoperation system will be created for Baxter. The controller used is Omni, which is a six-joint haptic device. Omni will also be used to give force feedback upon collision while the user is controlling the robot. Hence, a collision force feedback system is going to be created and combined with the teleoperation system. The teleoperation system will be tested in common daily applications.
Download or read book Teleoperated Hand Motion Tracking Robotic Manipulator with Haptic Feedback written by Hasala Ranmal Senevirathne and published by . This book was released on 2014 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this project is to design and develop a remotely operated Robotic Manipulator which can imitate human hand motions captured through a 3D vision sensor and an Inertial Measurement Unit (IMU). The gripper attached at the end of the Robotic Manipulator facilitates the user with gripping objects. Moreover there is a force feedback system at user's end which let the user feel the feedback force exerted on the robot's gripper by the object being gripped. This force feedback is vital in fragile object handling. Main goal of this project is to make Teleoperated Robotic Manipulators more affordable and flexible to use in daily consumer applications. This working model can be further developed to real world applications such as hazardous material handling, daily household activities and disable people assistance.
Download or read book Wearable Robots written by José L. Pons and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wearable robot is a mechatronic system that is designed around the shape and function of the human body, with segments and joints corresponding to those of the person it is externally coupled with. Teleoperation and power amplification were the first applications, but after recent technological advances the range of application fields has widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control. Logical in structure and original in its global orientation, this volume gives a full overview of wearable robotics, providing the reader with a complete understanding of the key applications and technologies suitable for its development. The main topics are demonstrated through two detailed case studies; one on a lower limb active orthosis for a human leg, and one on a wearable robot that suppresses upper limb tremor. These examples highlight the difficulties and potentialities in this area of technology, illustrating how design decisions should be made based on these. As well as discussing the cognitive interaction between human and robot, this comprehensive text also covers: the mechanics of the wearable robot and it’s biomechanical interaction with the user, including state-of-the-art technologies that enable sensory and motor interaction between human (biological) and wearable artificial (mechatronic) systems; the basis for bioinspiration and biomimetism, general rules for the development of biologically-inspired designs, and how these could serve recursively as biological models to explain biological systems; the study on the development of networks for wearable robotics. Wearable Robotics: Biomechatronic Exoskeletons will appeal to lecturers, senior undergraduate students, postgraduates and other researchers of medical, electrical and bio engineering who are interested in the area of assistive robotics. Active system developers in this sector of the engineering industry will also find it an informative and welcome resource.
Download or read book Biologically Inspired Robotics written by Yunhui Liu and published by CRC Press. This book was released on 2011-12-21 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers in the fields of control engineering, robotics, and biomedical engineering, this text helps readers understand the technology and principles in this emerging field.
Download or read book Handbook of Industrial Robotics written by Shimon Y. Nof and published by Krieger Publishing Company. This book was released on 1992 with total page 1382 pages. Available in PDF, EPUB and Kindle. Book excerpt: 120 leading experts from twelve countries have participated in creating this Second Edition of the Handbook of Industrial Robotics. Of its 66 chapters, 33 are new, covering important new topics in the theory, design, control, and applications of robotics. Other key features include a larger glossary of robotics terminology with over 800 terms and a CD-ROM that vividly conveys the colorful motions and intelligence of robotics. With contributions from the most prominent names in robotics worldwide, the Handbook remains the essential resource on all aspects of this complex subject.
Download or read book Control Problems in Robotics written by Antonio Bicchi and published by Springer Science & Business Media. This book was released on 2007-07-12 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?eld of robotics continues to ?ourish and develop. In common with general scienti?c investigation, new ideas and implementations emerge quite spontaneously and these are discussed, used, discarded or subsumed at c- ferences, in the reference journals, as well as through the Internet. After a little more maturity has been acquired by the new concepts, then archival publication as a scienti?c or engineering monograph may occur. The goal of the Springer Tracts in Advanced Robotics is to publish new developments and advances in the ?elds of robotics research – rapidly and informally but with a high quality. It is hoped that prospective authors will welcome the opportunity to publish a structured presentation of some of the emerging robotics methodologies and technologies. The edited volume by Antonio Bicchi, Henrik Christensen and Domenico Prattichizzo is the outcome of the second edition of a workshop jointly sponsored by the IEEE Control Systems Society and the IEEE Robotics and Automation Society. Noticeably, the previous volume was published in the Springer Lecture Notes on Control and Information Sciences. The authors are recognised as leading scholars internationally. A n- ber of challenging control problems on the forefront of today’s research in robotics and automation are covered, with special emphasis on vision, sensory-feedback control, human-centered robotics, manipulation, planning, ?exible and cooperative robots, assembly systems.
Download or read book Haptic Rendering written by Ming C. Lin and published by CRC Press. This book was released on 2008-07-25 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a long time, human beings have dreamed of a virtual world where it is possible to interact with synthetic entities as if they were real. It has been shown that the ability to touch virtual objects increases the sense of presence in virtual environments. This book provides an authoritative overview of state-of-theart haptic rendering algorithms
Download or read book Beyond Webcams written by Ken Goldberg and published by MIT Press. This book was released on 2002 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design, function, and challenges of online telerobotic systems. Remote-controlled robots were first developed in the 1940s to handle radioactive materials. Trained experts now use them to explore deep in sea and space, to defuse bombs, and to clean up hazardous spills. Today robots can be controlled by anyone on the Internet. Such robots include cameras that not only allow us to look, but also go beyond Webcams: they enable us to control the telerobots' movements and actions. This book summarizes the state of the art in Internet telerobots. It includes robots that navigate undersea, drive on Mars, visit museums, float in blimps, handle protein crystals, paint pictures, and hold human hands. The book describes eighteen systems, showing how they were designed, how they function online, and the engineering challenges they meet.
Download or read book Advances in Telerobotics written by Manuel Ferre and published by Springer. This book was released on 2007-08-10 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fascinating book that covers in detail all of the most recent advances in Telerobotics. A must-read for scientists, researchers and students in teleoperation, it describes everything from methods and experimental results to applications and developments. Its three sections cover human system interfaces, control, and applications.
Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Abedin-Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries Chapters are contributed by worldwide experts from both engineering and surgical backgrounds
Download or read book Cellular Actuators written by Jun Ueda and published by Butterworth-Heinemann. This book was released on 2017-01-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular Actuators: Modularity and Variability in Muscle-Inspired Actuation describes the roles actuators play in robotics and their insufficiency in emerging new robotic applications, such as wearable devices and human co-working robots where compactness and compliance are important. Piezoelectric actuators, the topic of this book, provide advantages like displacement scale, force, reliability, and compactness, and rely on material properties to provide displacement and force as reactions to electric stimulation. The authors, renowned researchers in the area, present the fundamentals of muscle-like movement and a system-wide study that includes the design, analysis, and control of biologically inspired actuators. This book is the perfect guide for researchers and practitioners who would like to deploy this technology into their research and products. Introduces Piezoelectric Actuators concepts in a system wide integrated approach Acts as a single source for the design, analysis, and control of actuator arrays Presents applications to illustrate concepts and the potential of the technology Details the physical assembly possibilities of Piezo actuators Presents fundamentals of bio inspired actuation Introduces the concept of cellular actuators
Download or read book Autonomous Horizons written by Greg Zacharias and published by Independently Published. This book was released on 2019-04-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Greg Zacharias, former Chief Scientist of the United States Air Force (2015-18), explores next steps in autonomous systems (AS) development, fielding, and training. Rapid advances in AS development and artificial intelligence (AI) research will change how we think about machines, whether they are individual vehicle platforms or networked enterprises. The payoff will be considerable, affording the US military significant protection for aviators, greater effectiveness in employment, and unlimited opportunities for novel and disruptive concepts of operations. Autonomous Horizons: The Way Forward identifies issues and makes recommendations for the Air Force to take full advantage of this transformational technology.
Download or read book Robot Operating System ROS written by Anis Koubaa and published by Springer. This book was released on 2016-02-09 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide the reader with a comprehensive coverage on the Robot Operating Systems (ROS) and latest related systems, which is currently considered as the main development framework for robotics applications. The book includes twenty-seven chapters organized into eight parts. Part 1 presents the basics and foundations of ROS. In Part 2, four chapters deal with navigation, motion and planning. Part 3 provides four examples of service and experimental robots. Part 4 deals with real-world deployment of applications. Part 5 presents signal-processing tools for perception and sensing. Part 6 provides software engineering methodologies to design complex software with ROS. Simulations frameworks are presented in Part 7. Finally, Part 8 presents advanced tools and frameworks for ROS including multi-master extension, network introspection, controllers and cognitive systems. This book will be a valuable companion for ROS users and developers to learn more ROS capabilities and features.
Download or read book Robotics written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the successful Modelling and Control of Robot Manipulators by Sciavicco and Siciliano (Springer, 2000), Robotics provides the basic know-how on the foundations of robotics: modelling, planning and control. It has been expanded to include coverage of mobile robots, visual control and motion planning. A variety of problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained. The text includes coverage of fundamental topics like kinematics, and trajectory planning and related technological aspects including actuators and sensors. To impart practical skill, examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, end-of-chapter exercises are proposed, and the book is accompanied by an electronic solutions manual containing the MATLAB® code for computer problems; this is available free of charge to those adopting this volume as a textbook for courses.
Download or read book Grasping in Robotics written by Giuseppe Carbone and published by Springer Science & Business Media. This book was released on 2012-11-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grasping in Robotics contains original contributions in the field of grasping in robotics with a broad multidisciplinary approach. This gives the possibility of addressing all the major issues related to robotized grasping, including milestones in grasping through the centuries, mechanical design issues, control issues, modelling achievements and issues, formulations and software for simulation purposes, sensors and vision integration, applications in industrial field and non-conventional applications (including service robotics and agriculture). The contributors to this book are experts in their own diverse and wide ranging fields. This multidisciplinary approach can help make Grasping in Robotics of interest to a very wide audience. In particular, it can be a useful reference book for researchers, students and users in the wide field of grasping in robotics from many different disciplines including mechanical design, hardware design, control design, user interfaces, modelling, simulation, sensors and humanoid robotics. It could even be adopted as a reference textbook in specific PhD courses.
