Download or read book Sensors for Mobile Robots written by H. R. Everett and published by A K PETERS. This book was released on 2019-12 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author compiles everything a student or experienced developmental engineer needs to know about the supporting technologies associated with the rapidly evolving field of robotics. From the table of contents: Design Considerations * Dead Reckoning * Odometry Sensors * Doppler and Inertial Navigation * Typical Mobility Configurations * Tactile and Proximity Sensing * Triangulation Ranging * Stereo Disparity * Active Triangulation * Active Stereoscopic * Hermies * Structured Light * Known Target Size * Time of Flight * Phase-Shift Measurement * Frequency Modulation * Interferometry * Range from Focus * Return Signal Intensity * Acoustical Energy * Electromagnetic Energy * Optical Energy * Microwave Radar * Collision Avoidance * Guidepath Following * Position-Location Systems * Ultrasonic and Optical Position-Location Systems * Wall, Doorway, andCeiling Referencing * Application-Specific Mission Sensors

Download or read book Robot sensors and transducers written by S Ruocco and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of sensor's with machines, whether to control them continuously or to inspect and verify their operation, can be highly cost-effective in particular areas of industrial automation. Examples of such areas include sensing systems to monitor tool condition, force and torque sensing for robot assembly systems, vision-based automatic inspection, and tracking sensor's for robot arc welding and seam sealing. Many think these will be the basis of an important future industry. So far, design of sensor systems to meet these needs has been (in the interest of cheapness) rather ad hoc and carefully tailored to the application both as to the transducer hardware and the associated processing software. There are now, however, encouraging signs of commonality emerging between different sensor application areas. For instance, many commercial vision systems and some tactile systems just emerging from research are able to use more or less standardized techniques for two-dimensional image processing and shape representation. Structured-light triangulation systems can be applied with relatively minor hardware and software variations to measure three-dimensional profiles of objects as diverse as individual soldered joints, body pressings, and weldments. Sensors make it possible for machines to recover 'sensibly' from errors, and standard software proce dures such as expert systems can now be applied to facilitate this.

Download or read book Computer Vision and Sensor Based Robots written by C.H. Dodd and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal ofthe symposium, "Computer Vision and Sensor-Based Robots," held at the General Motors Research Laboratories on September 2S and 26, 1978, was to stimulate a closer interaction between people working in diverse areas and to discuss fundamental issues related to vision and robotics. This book contains the papers and general discussions of that symposium, the 22nd in an annual series covering different technical disciplines that are timely and of interest to General Motors as well as the technical community at large. The subject of this symposium remains timely because the cost of computer vision hardware continues to drop and there is increasing use of robots in manufacturing applications. Current industrial applications of computer vision range from simple systems that measure or compare to sophisticated systems for part location determination and inspection. Almost all industrial robots today work with known parts in known posi tions, and we are just now beginning to see the emergence of programmable automa tion in which the robot can react to its environment when stimulated by visual and force-touch sensor inputs. As discussed in the symposium, future advances will depend largely on research now underway in several key areas. Development of vision systems that can meet industrial speed and resolution requirements with a sense of depth and color is a necessary step.

Download or read book Elements of Robotics written by Mordechai Ben-Ari and published by Springer. This book was released on 2017-10-25 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book bridges the gap between playing with robots in school and studying robotics at the upper undergraduate and graduate levels to prepare for careers in industry and research. Robotic algorithms are presented formally, but using only mathematics known by high-school and first-year college students, such as calculus, matrices and probability. Concepts and algorithms are explained through detailed diagrams and calculations. Elements of Robotics presents an overview of different types of robots and the components used to build robots, but focuses on robotic algorithms: simple algorithms like odometry and feedback control, as well as algorithms for advanced topics like localization, mapping, image processing, machine learning and swarm robotics. These algorithms are demonstrated in simplified contexts that enable detailed computations to be performed and feasible activities to be posed. Students who study these simplified demonstrations will be well prepared for advanced study of robotics. The algorithms are presented at a relatively abstract level, not tied to any specific robot. Instead a generic robot is defined that uses elements common to most educational robots: differential drive with two motors, proximity sensors and some method of displaying output to the user. The theory is supplemented with over 100 activities, most of which can be successfully implemented using inexpensive educational robots. Activities that require more computation can be programmed on a computer. Archives are available with suggested implementations for the Thymio robot and standalone programs in Python.

Download or read book Sensor Devices and Systems for Robotics written by Alicia Casals and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: As robots improve in efficiency and intelligence, there is a growing need to develop more efficient, accurate and powerful sensors in accordance with the tasks to be robotized. This has led to a great increase in the study and development of different kinds of sensor devices and perception systems over the last ten years. Applications that differ from the industrial ones are often more demanding in sensorics since the environment is not usually so well structured. Spatial and agricultural applications are examples of situations where the environment is unknown or variable. Therefore, the work to be done by a robot cannot be strictly programmed and there must be an interactive communication with the environment. It cannot be denied that evolution and development in robotics are closely related to the advances made in sensorics. The first vision and force sensors utilizing discrete components resulted in a very low resolution and poor accuracy. However, progress in VLSI, imaging devices and other technologies have led to the development of more efficient sensor and perception systems which are able to supply the necessary data to robots.

Download or read book Traditional and Non Traditional Robotic Sensors written by Thomas C. Henderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the written record of the NATO Advanced Research Workshop on Traditional and Non-Traditional Robotic Sensors held in the Hotel Villa del Mare, Maratea, Italy, August 28 - September 1, 1989. This workshop was organized under the auspicies of the NATO Special Program on Sensory Systems for Robotic Control. Professor Frans Groen from the University of Amsterdam and Dr. Gert Hirzinger from the German Aerospace Research Establishment (DLR) served as members of the organizing committee for this workshop. Research in the area of robotic sensors is necessary in order to support a wide range of applications, including: industrial automation, space robotics, image analysis, microelectronics, and intelligent sensors. This workshop focused on the role of traditional and non-traditional sensors in robotics. In particular, the following three topics were explored: - Sensor development and technology, - Multisensor integration techniques, - Application area requirements which motivate sensor development directions. This workshop'brought together experts from NATO countries to discuss recent developments in these three areas. Many new directions (or new directions on old problems) were proposed. Existing sensors should be pushed into new application domains such as medical robotics and space robotics.

Download or read book Robot Sensors written by Alan Pugh and published by . This book was released on 1986 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: V.1 Vision.--v.2. Tactile and non-vision.

Download or read book Optical Fiber Sensors for the Next Generation of Rehabilitation Robotics written by Arnaldo Leal-Junior and published by Academic Press. This book was released on 2021-10-26 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Fiber Sensors for the Next Generation of Rehabilitation Robotics presents development concepts and applications of optical fiber sensors made of compliant materials in rehabilitation robotics. The book provides methods for the instrumentation of novel compliant devices. It presents the development, characterization and application of optical fiber sensors in robotics, ranging from conventional robots with rigid structures to novel wearable systems with soft structures, including smart textiles and intelligent structures for healthcare. Readers can look to this book for help in designing robotic structures for different applications, including problem-solving tactics in soft robotics. This book will be a great resource for mechanical, electrical and electronics engineers and photonics and optical sensing engineers. Addresses optical fiber sensing solutions in wearable systems and soft robotics Presents developments—from foundational, to novel and future applications—of optical fiber sensors in the next generation of robotic devices Provides methods for the instrumentation of novel compliant devices

Download or read book Sensors and Sensory Systems for Advanced Robots written by Paolo Dario and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the NATO Advanced Research Workshop (ARW) on "Sensors and Sensory Systems for Advanced Robots", which was held in Maratea, Italy, during the week Apri I 28 - May 3, 1986. Participants in the ARW, who came from eleven NATO and two non-NATO countries, represented an i nternat i ona I assortment of d i st i ngu i shed research centers in industry, government and academia. Purpose of the Workshop was to rev i ew the state of the art of sensing for advanced robots, to discuss basic concepts and new ideas on the use of sensors for robot control and to provide recommendations for future research in this area, There IS an almost unanimous consensus among invest i gators in the fie I d of robot i cs that the add i t i on of sensory capabi I ities represents the "natural" evolution of present industrial robots, as wei I as the necessary premise to the development of advanced robots for nonindustrial app I i cat ions. However, a number of conceptua I and techn i ca I problems sti I I challenge the practical implementation and widespread appl ication of sensor-based robot control techn i ques. Cruc i a I among those prob I ems is the ava i lab iii ty of adequate sensors.

Download or read book Sensor Based Robots Algorithms and Architectures written by C.S.George Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most industrial robots today have little or no sensory capability. Feedback is limited to information about joint positions, combined with a few interlock and timing signals. These robots can function only in an environment where the objects to be manipulated are precisely located in the proper position for the robot to grasp (i. e. , in a structured environment). For many present industrial applications, this level of performance has been adequate. With the increasing demand for high performance sensor-based robot manipulators in assembly tasks, meeting this demand and challenge can only be achieved through the consideration of: 1) efficient acquisition and processing of intemaVextemal sensory information, 2) utilization and integration of sensory information from various sensors (tactile, force, and vision) to acquire knowledge in a changing environment, 3) exploitation of inherent robotic parallel algorithms and efficient VLSI architectures for robotic computations, and finally 4) system integration into a working and functioning robotic system. This is the intent of the Workshop on Sensor-Based Robots: Algorithms and Architectures - to study the fundamental research issues and problems associated with sensor-based robot manipulators and to propose approaches and solutions from various viewpoints in improving present day robot manipula tors in the areas of sensor fusion and integration, sensory information processing, and parallel algorithms and architectures for robotic computations.

Download or read book Visual Sensing and its Applications written by Zhongxue Gan and published by Springer Science & Business Media. This book was released on 2011-12-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Visual Sensing and its Applications: Integration of Laser Sensors to Industrial Robots” provides comprehensive and up-to-date coverage of research and development on this robotic vision system. A laser-structured light is the main concern in discussions of visual sensing. Also addressed in this book are all components of the robotic vision system and an emphasis on how to increase the accuracy of the system using three levels of calibration. This includes calibration of the vision system (eye calibration), calibration of eye-to-hand configuration and calibration of robot kinematics (hand calibration). With the integration of the laser sensors to industrial robots numerous applications in the field of robotic welding, grinding, machining, inspection, and palletizing are illustrated based on practical engineering projects in order to demonstrate how the visual sensing is performed. The book will serve as a valuable resource for researchers and engineers in the areas of robotics and machine vision. Dr. Zhongxue Gan is a vice chairman and chief scientist of the ENN Group, China. He serves as a member of the National Energy Expert Consultation Committee of China and member of the National Coal Council of the USA. He is also a co-founder of Intersmart Robotic Systems Co. Ltd., China. He was a research fellow in flexible automation systems at ABB and a founding director of ABB Corporate Research Robot Laboratories, both in the USA and in China. Dr. Qing Tang is a co-founder and CEO of Intersmart Robotic Systems Co. Ltd., China and an adjunct professor in Physics at Sichuan University, China. He was a principle consulting engineer and project manager at the ABB Corporate Research Robot Laboratory in the USA.

Download or read book Sensors for Mobile Robots written by H.R. Everett and published by CRC Press. This book was released on 1995-07-15 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author compiles everything a student or experienced developmental engineer needs to know about the supporting technologies associated with the rapidly evolving field of robotics.From the table of contents: Design Considerations * Dead Reckoning * Odometry Sensors * Doppler and Inertial Navigation * Typical Mobility Configurations * Tactile and

Download or read book Intelligent Robots written by R. C. Bolles and published by World Scientific. This book was released on 1997 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid advances in sensors, computers, and algorithms continue to fuel dramatic improvements in intelligent robots. In addition, robot vehicles are starting to appear in a number of applications. For example, they have been installed in public settings to perform such tasks as delivering items in hospitals and cleaning floors in supermarkets; recently, two small robot vehicles were launched to explore Mars.This book presents the latest advances in the principal fields that contribute to robotics. It contains contributions written by leading experts addressing topics such as Path and Motion Planning, Navigation and Sensing, Vision and Object Recognition, Environment Modeling, and others.

Download or read book Advanced Tactile Sensing For Robotics written by Howard R Nicholls and published by World Scientific. This book was released on 1992-12-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced robot systems require sensory information to enable them to make decisions and to carry out actions in a versatile, autonomous way. Humans make considerable use of information derived through touch, and an emerging domain of robot sensing is tactile sensing. This book considers various aspects of tactile sensing, from hardware design through to the use of tactile data in exploratory situations using a multi-fingered robot hand.In the first part of the book, the current state of progress of tactile sensing is surveyed, and it is found that the field is still in an early stage of development. Next, some fundamental issues in planar elasticity, concerning the interaction between tactile sensors and the environment, are presented. Having established how the basic data can be derived from the sensors, the issues of what form tactile sensors should take, and how they should be used, are considered. This is particularly important given the infancy of this field. The human tactile system is examined, and then biological touch and its implications for robotics is looked at. Some experiments in dextrous manipulation using a robot hand are described, which apply some of these results. The integration of tactile sensors into a complete system is also considered, and another, novel, approach for using touch sensing in a flexible assembly machine is described.Both basic material and new research results are provided in this book, thus catering to different levels of readers. The chapters by world experts in different aspects of the field are integrated well into one volume. The editor and authors have produced a thorough and in-depth survey of all work in robot tactile sensing, making the book essential reading for all researchers in this emergent field.

Download or read book Robot Sensors written by Alan Pugh and published by . This book was released on 1986 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: V.1 Vision.--v.2. Tactile and non-vision.

Download or read book Robotic Tactile Sensing written by Ravinder S. Dahiya and published by Springer Science & Business Media. This book was released on 2012-07-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future robots are expected to work closely and interact safely with real-world objects and humans alike. Sense of touch is important in this context, as it helps estimate properties such as shape, texture, hardness, material type and many more; provides action related information, such as slip detection; and helps carrying out actions such as rolling an object between fingers without dropping it. This book presents an in-depth description of the solutions available for gathering tactile data, obtaining aforementioned tactile information from the data and effectively using the same in various robotic tasks. The efforts during last four decades or so have yielded a wide spectrum of tactile sensing technologies and engineered solutions for both intrinsic and extrinsic touch sensors. Nowadays, new materials and structures are being explored for obtaining robotic skin with physical features like bendable, conformable, and stretchable. Such features are important for covering various body parts of robots or 3D surfaces. Nonetheless, there exist many more hardware, software and application related issues that must be considered to make tactile sensing an effective component of future robotic platforms. This book presents an in-depth analysis of various system related issues and presents the trade-offs one may face while developing an effective tactile sensing system. For this purpose, human touch sensing has also been explored. The design hints coming out of the investigations into human sense of touch can be useful in improving the effectiveness of tactile sensory modality in robotics and other machines. Better integration of tactile sensors on a robot’s body is prerequisite for the effective utilization of tactile data. The concept of semiconductor devices based sensors is an interesting one, as it allows compact and fast tactile sensing systems with capabilities such as human-like spatio-temporal resolution. This book presents a comprehensive description of semiconductor devices based tactile sensing. In particular, novel Piezo Oxide Semiconductor Field Effect Transistor (POSFET) based approach for high resolution tactile sensing has been discussed in detail. Finally, the extension of semiconductors devices based sensors concept to large and flexile areas has been discussed for obtaining robotic or electronic skin. With its multidisciplinary scope, this book is suitable for graduate students and researchers coming from diverse areas such robotics (bio-robots, humanoids, rehabilitation etc.), applied materials, humans touch sensing, electronics, microsystems, and instrumentation. To better explain the concepts the text is supported by large number of figures.

Download or read book Active Sensors for Local Planning in Mobile Robotics written by Penelope Probert Smith and published by World Scientific. This book was released on 2001 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes recent work on active sensors for mobile robots. An active sensor interacts with its surroundings to supply data on demand for a particular function, gathering and abstracting information according to need rather than acting as a generic data gatherer. Details of the physical operation are hidden.The book deals mainly with active range sensors, which provide rapid information for local planning, describing extraction of two-dimensional features such as lines, corners and cylinders to reconstruct a plan of a building. It is structured according to the physical principles of the sensors, since to a large extent these determine the function of the sensors and the methods of processing. Recent work using sonar, optoelectronic sensors and radar is described. Sections on vision and on sensor management develop the idea of software adaptation for efficient operation in a changing environment.