Download or read book Robot Builder s Cookbook written by Owen Bishop and published by Elsevier. This book was released on 2007-09-10 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Owen Bishop introduces, through hands-on project work, the mechanics, electronics and programming involved in practical robot design-and-build. The use of the PIC microcontroller throughout provides a painless introduction to programming whilst harnessing the power of a highly popular microcontroller used by students and design engineers worldwide. This is a book for first-time robot builders, advanced builders wanting to know more about programming robots and students in Further and Higher Education tackling microcontroller-based practical work. They will all find this book a unique and exciting source of projects, ideas and techniques, to be combined into a wide range of fascinating robots. · Full step-by-step instructions for 5 complete self-build robots · Introduces key techniques in electronics, programming and construction - for robust robots that work first time · Illustrations, close-up photographs and a lively, readable text make this a fun and informative guide for novice and experienced robot builders

Download or read book Open Source Robotics and Process Control Cookbook written by Lewin Edwards and published by Elsevier. This book was released on 2011-08-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this practical reference, popular author Lewin Edwards shows how to develop robust, dependable real-time systems for robotics and other control applications, using open-source tools. It demonstrates efficient and low-cost embedded hardware and software design techniques, based on Linux as the development platform and operating system and the Atmel AVR as the primary microcontroller. The book provides comprehensive examples of sensor, actuator and control applications and circuits, along with source code for a number of projects. It walks the reader through the process of setting up the Linux-based controller, from creating a custom kernel to customizing the BIOS, to implementing graphical control interfaces. Including detailed design information on: · ESBUS PC-host interface · Host-module communications protocol · A speed-controlled DC motor with tach feedback and thermal cut-off · A stepper motor controller · A two-axis attitude sensor using a MEMS accelerometer · Infrared remote control in Linux using LIRC · Machine vision using Video4Linux The first-ever book on using open source technology for robotics design! Covers hot topics such as GPS navigation, 3-D sensing, and machine vision, all using a Linux platform!

Download or read book Robot Building For Dummies written by Roger Arrick and published by John Wiley & Sons. This book was released on 2011-05-09 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Always wanted to build a robot but didn't know where to start? This user-friendly guide shows what robots can do, how they work, and more Ready to enter the world of robotics? Then this book is for you! If you don't know much about electronics, high-tech tools, or computer programming, that’s okay. If you can work with some basic tools (such as pliers, a screwdriver, and a cutting knife), have a computer and know your way around it, and want to make a robot, you’re in the right place. Robot Building For Dummies walks you through building your very own little metal assistant from a kit, dressing it up, giving it a brain, programming it to do things, and even making it talk. In this hands-on guide that's illustrated with step-by-step instructions and written in plain English, you get an overview of robotics and the tools, technology, and skills you need to become a robot builder. You'll discover The various approaches to robot building, such as building from scratch or starting with a kit The mechanical parts of a robot and how they fit together The components of an efficient workspace and how to set one up Programming basics you need to enter and download commands into your robot How to add a controller, which lets you download software programs to your robot Using an editor program to connect to your robot The importance of preparing the parts of a robot kit and then assembling the chassis, wheels, and sensor whiskers The fun of making your robot functional by adding motion detection, light sensors, and more How to troubleshoot common problems and fix them to save your robot's life Along the way, you'll gather tidbits about robot history, enthusiasts' groups, a list of parts suppliers, and all-important safety tips. As an added bonus, Robot Building For Dummies comes with rebates for your robot building kit – no more waiting, grab your copy and start building your robot today.

Download or read book Robot Operating System Cookbook written by Kumar Bipin and published by Packt Publishing Ltd. This book was released on 2018-06-29 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leverage the power of ROS to build exciting collaborative robots. Key Features Delve into an open source, meta-operating system for your robot Get acquainted with tools and libraries for building and running code on multiple platforms Use Gazebo to model your robot and create a virtual environment Book Description This book will leverage the power of ROS with an introduction to its core and advanced concepts through exciting recipes. You will get acquainted with the use of different synchronous and asynchronous communication methods, including messages, services, and actions. You will learn how to use the various debugging and visualization tools used in development and how to interface sensors and actuators with the ROS framework. Firstly, you will get to grips with ROS simulation frameworks, such as Gazebo and RotorS for modeling and simulating any physical robot and virtual environment. You will also cover mobile robotics, micro-aerial vehicles, and robotic arms, which are the leading branches of robotic applications. Robot Operating System Cookbook will also guide you in the development of an autonomous navigation framework for both mobile robots and micro-aerial vehicles. Finally, you will explore ROS-Industrial, an open source project that extends the advanced capabilities of ROS software to manufacturing industries. What you will learn Explore advanced concepts, such as ROS pluginlib, nodelets, and actionlib Work with ROS visualization, profiling, and debugging tools Gain experience in robot modeling and simulation using Gazebo Understand the ROS Navigation Stack for mobile robots Configure a MoveIt! package for a manipulator robot Develop an autonomous navigation framework for MAV using ORB SLAM and MoveIt Integrate sensors, actuators, and robots into the ROS ecosystem Get acquainted with the ROS-Industrial package with hardware support, capabilities, and applications Who this book is for If you’re a researcher or engineer with an interest in the problems, solutions, and future research issues that you may encounter in the development of robotic applications, this book is for you. Basic knowledge of C++ and Python programming with the GNU/Linux environment is strongly recommended to assist with understanding the key concepts covered in the book.

Download or read book How to Make a Robot written by Gordon McComb and published by Maker Media, Inc.. This book was released on 2018-03-15 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the basics of modern robotics while building your own intelligent robot from scratch! You'll use inexpensive household materials to make the base for your robot, then add motors, power, wheels, and electronics. But wait, it gets better: your creation is actually five robots in one! -- build your bot in stages, and add the features you want. Vary the functions to create a robot that's uniquely yours. Mix and match features to make your own custom robot: Flexible Motorized Base -- a playpen for all kinds of programming experiments Obstacle Detector -- whiskers detect when your robot has bumped into things Object Avoider -- ultrasonic sound lets your robot see what's in front of it Infrared Remote Control -- command your robot from your easy chair Line Follower -- use optics to navigate your bot; have races with other robot builders! You will learn how switches, ultrasonics, infrared detectors, and optical sensors work. Install an Arduino microcontroller board and program your robot to avoid obstacles, provide feedback with lights and sound, and follow a tracking line. In this book you will combine multiple disciplines -- electronics, programming, and engineering -- to successfully build a multifunctional robot. You'll discover how to: construct a motorized base set up an Arduino to function as the brain use "whisker" switches to detect physical contact avoid obstacles with ultrasonic sensors teach your robot to judge distances use a universal remote to control your robot install and program a servo motor respond to input with LEDs, buzzers, and tones mount line-following sensors under your robot And more. Everything is explained with lots and lots of full-color line drawings. No prior experience is necessary. You'll have fun while you learn a ton!

Download or read book Robot Building for Beginners written by David Cook and published by Apress. This book was released on 2010-07-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: “I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start.” —David Cook Robot Building for Beginners, Second Edition is an update of David Cook’s best-selling Robot Building for Beginners. This book continues its aim at teenagers and adults who have an avid interest in science and dream of building household explorers. No formal engineering education is assumed. The robot described and built in this book is battery powered and about the size of a lunchbox. It is autonomous. That is, it isn’t remote controlled. You’ll begin with some tools of the trade, and then work your way through prototyping, robot bodybuilding, and eventually soldering your own circuit boards. By the book’s end, you will have a solid amateur base of understanding so that you can begin creating your own robots to vacuum your house or maybe even rule the world!

Download or read book Robot Builder written by John Baichtal and published by Que Publishing. This book was released on 2014-10-29 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absolutely no experience needed! Learn robot building from the ground up, hands-on, in full color! Love robots? Start building them. It’s way easier than you ever imagined! John Baichtal has helped thousands of people get started with robotics. He knows what beginners need to know. He knows your questions. He knows where you might need extra help. Now, he’s brought together this practical knowledge in one incredibly easy tutorial. Hundreds of full-color photos guide you through every step, every skill. You’ll start simple, as you build a working robot in the very first chapter. Then, you’ll grow your skills to expert-level: powering motors, configuring sensors, constructing a chassis, even programming low-cost Arduino microcontrollers. You’ll learn hands-on, through real step-by-step projects...and go straight to the cutting-edge with in-depth sidebars. Wondering just how much you can really do? Baichtal shows you 30 incredible robots built by people just like you! John Baichtal’s books about toys, tools, robots, and hobby electronics include Hack This: 24 Incredible Hackerspace Projects from the DIY Movement; Basic Robot Building With Lego Mindstorms NXT 2.0; Arduino for Beginners; MAKE: Lego and Arduino Projects for MAKE (as coauthor); and the forthcoming Building Your Own Drones: The Beginner’s Guide to UAVs and ROVs. A founding member of the pioneering Twin Cities Maker hackerspace, he got his start writing for Wired’s legendary GeekDad blog, and for DIYer bible MAKE Magazine. Make your robots move with motors and wheels Build solar-powered robots that work without batteries Control robots via Wi-Fi, radio, or even across the Internet Program robots to respond to sensor inputs Use your standard TV remote to control your robots Create robots that detect intruders and shoot them with Nerf® darts Grab and carry objects using claws and grippers Build water-borne robots that float, submerge, and “swim” Create “artbots” that paint or draw original artworks Enable your robots to send text messages when they take specific actions Discover today’s new generation of hobbyist-friendly robotics kits Organize your ultimate robot-builder’s toolbox Master simple safety routines that protect you whatever you’re building

Download or read book Robot Builder s Bonanza Third Edition written by Gordon McComb and published by McGraw Hill Professional. This book was released on 2006-03-10 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amateur robotics market is maturing every year There are even several companies that cater specifically to the hobbyist and educational market. With the advent of such organisations as FIRST and KISS robotics, it is the perfect time to release a new and clearly improved version of our powerhouse RBB. Key features Covers LEGO to legged robot construction plans to provide a scope from the raw beginner to the intermediate/advanced reader ALL projects are being revamped to be more usable, more customisable, and more visual -- with illustrations of the final product right at the beginning of the chapter Eliminates the outdated or "out of tune" chapters that don't appeal to current robot audiences UNPRECEDENTED author duo -- literally the two grand masters of the robotic world

Download or read book Robot Builder s Bonanza 5th Edition written by Gordon McComb and published by McGraw Hill Professional. This book was released on 2018-12-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling guide to hobby robotics―fully updated for the latest technologies! Learn to build your own robots using the hands-on information contained in this thoroughly revised TAB guide. Written by the “godfather of hobby robotics,” the book clearly explains the essential hardware, circuits, and brains and contains easy-to-follow, step-by-step plans for low-cost, cool robotics projects. Robot Builder’s Bonanza, Fifth Edition contains more than two dozen new projects for hobbyists of all ages and skill levels. The projects are modular and can be combined to create a variety of highly intelligent and workable custom robots. Discover how to: •Wire up robotics circuits from common electronic components•Get up and running building your own robots•Attach motors, wheels, legs, arms, and grippers•Make your robots walk, talk, and obey commands•Build brains from Arduino, BBC Micro:bit, Raspberry Pi, and other microcontrollers•Incorporate touch, proximity, navigation, and environmental sensors•Operate your ‘bot via remote control •Generate sound and interpret visual feedback•Construct advanced robots that can see light and follow pre-drawn paths!

Download or read book Cookbook For Mobile Robotic Platform Control written by Gehlot Dr. Anita and published by BPB Publications. This book was released on 2019-09-20 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling Robots using Blynk, Virtuino, Cayenne, Thingspeak, FirebaseKey features The book provides gradual pace of basics to advanced interfacing and programming with Ti launch pad for IoT applications. It provides a unique style for IoT applications with program codes. It discusses various applications where the Internet of Things plays an important role, and considers a number of different independent prototypes for various mobile robotics platform control methods. The control of robot with different mobile apps like Blynk, Virtuino, Cayenne, Thingspeak, Firebase are included for vast coverage of scope. Step by step programming, to get started with Ti launch Pad Case studies to provide solution to real time problems The case studies and programming in book are tested on real hardware during handling the industrial and student projects. Description This book provides a platform to the readers, where they can understand the applications of 'Internet of Things' to control the robotic platform. It covers the basic knowledge of the mobile apps with their designing steps and programming. The objective of the book is to discuss various applications of robotic platform where 'Internet of things' can play an important role. This book comprises of total seventeen chapters for designing different independent prototypes for the various control methods. It covers introduction to IoT and basic components to design a robotic platform. The system demonstration is done with the help of Ti Launch Pad and other interfacing devices. The control of robot with different mobile apps like Blynk, Virtuino, Cayenne, Thingspeak, Firebase are included for vast coverage of scope.It would be beneficial for the people who want to get started with hardware based robotic prototypes with IoT. This book is entirely based on the practical experience of the authors while undergoing projects with the students and industries.What will you learn Interfacing of Ti launch Pad and NodeMCU with Input/Output Devices Serial Communication between Ti Launch Pad and NodeMCU Robot Control Using the Blynk, Virtuino App Environment Monitoring Robot with BLYNK App Sensory Data Acquisition Robot Using a ThingSpeak Server Robot Control with Cayenne App, Local Server and NodeMCU, Firebase Server Who this book is for Students pursuing BE/BSc/ME/MSc/BTech/MTech in Computer Science, Electronics, Electrical. Table of contents1. Introduction2. Components of a Robotic Platform3. Interfacing of Ti launch Pad with Input/Output Devices4. Interfacing of NodeMCU with Input/Output Devices5. Serial Communication between Ti Launch Pad and NodeMCU6. Robot Control Using the Blynk App7. Robot Control Using the Virtuino App8. Environment Monitoring Robot with BLYNK App9. Sensory Data Acquisition Robot Using a ThingSpeak Server 10. Robot Control with Cayenne App11. Robot Control with Local Server and NodeMCU12. Robot Control with a Firebase Server13. XBee and Wi-Fi Modem Based Robot Control14. Fire Fighting Robot15. The Internet of Things Robotic Arm16. The Smart Orchard with a Robotic Arm Sprinkler17. Smart Farming with the IoT About the authorDr. Anita Gehlot is currently associated with Lovely Professional University as Associate Professor with more than ten years of experience in academics. She has twenty patents in her account. She has published more than fifty research papers in referred journals and conference. She has organized a number of workshops, summer internships and expert lectures for students. She has been invited as session chair keynote speaker to international/national conferences and faculty development program. Dr. Rajesh Singh is currently associated with Lovely Professional University as Professor with more than fifteen years of experience in academics. He has been awarded as gold medalist in M.Tech and honors in his B.E. His area of expertise includes embedded systems, robotics, wireless sensor networks and Internet of Things. He has organized and conducted a number of workshops, summer internships and expert lectures for students as well as faculty. He has twenty-three patents in his account. He has published around hundred research papers in referred journals/conferences. His LinkedIn Profile: linkedin.com/in/dr-rajesh-singh-6380845aHis Website: orcid.org/0000-0002-3164-8905 Dr. Lovi Raj Gupta is the Executive Dean, Faculty of Technology & Sciences, Lovely Professional University. He is a leading light in the field of Technical and Higher education in the country. His research-focused approach and an insightful innovative intervention of technology in education have won him much accolades and laurels.In 2001, he was appointed as Assistant Controller (Technology), Ministry of IT, Govt. of India by the Honorable President of India in the Office of the Controller of Certifying Authorities (CCA). In 2013, he was accorded the role in the National Advisory Board for What Can I Give Mission - Kalam Foundation of Dr. APJ Abdul Kalam. In 2011, he received the MIT Technology Review Grand Challenge Award followed by the coveted Infosys InfyMakers Award in the year 2016. He has ten patents to his account. His LinkedIn Profile: linkedin.com/in/loviraj Bhupendra Singh is Managing Director of Schematics Microelectronics and provides Product design and R&D support to industries and Universities. He has completed BCA, PGDCA, M.Sc. (CS), M.Tech and has more than eleven years of experience in the field of Computer Networking and Embedded systems. He has published twelve books in the area of Embedded Systems and Internet of Things. His Blog: schematicslab.blogspot.in/ His LinkedIn Profile: linkedin.com/in/bhupisir

Download or read book Robot Builder s Sourcebook written by Gordon McComb and published by McGraw Hill Professional. This book was released on 2003 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: * A much-needed clearinghouse for information on amateur and educational robotics, containing over 2,500 listings of robot suppliers, including mail order and local area businesses * Contains resources for both common and hard-to-find parts and supplies * Features dozens of "sidebars" to clarify essential robotics technologies * Provides original articles on various robot-building topics

Download or read book Robot Builder s Bonanza 4th Edition written by Gordon McComb and published by McGraw Hill Professional. This book was released on 2011-04-22 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bestselling Robotics Book--Now with New Projects and Online Tools! "Amazing...should be required reading for any budding robot builder!" -GeekDad, Wired.com Have fun while learning how to design, construct, and use small robots! This richly illustrated guide offers everything you need to know to construct sophisticated, fully autonomous robots that can be programmed from your computer. Fully updated with the latest technologies and techniques, Robot Builder's Bonanza, Fourth Edition includes step-by-step plans that take you from building basic motorized platforms to giving the machine a brain--and teaching it to walk, talk, and obey commands. This robot builder's paradise is packed with more than 100 affordable projects, including 10 completely new robot designs. The projects are modular and can be combined to create a variety of highly intelligent and workable robots of all shapes and sizes. Mix and match the projects to develop your own unique creations. The only limit is your imagination! Robot Builder's Bonanza, Fourth Edition covers: Parts, materials, and tools Building motorized wooden, plastic, and metal platforms Rapid prototyping methods Drafting bots with computer-aided design Constructing high-tech robots from toys Building bots from found parts Power, motors, and locomotion Robots with wheels, tracks, and legs Constructing robotic arms and grippers Robot electronics and circuit making Computers and electronic control Microcontrollers--Arduino, PICAXE, and the BASIC stamp Remote control systems Sensors, navigation, and visual feedback Robot vision via proximity, light, and distance New! FREE online content at: www.robotoid.com My First Robot tutorial lessons Project parts finder Animated, interactive learning tools How-to videos, robot e-plans, bonus articles, links, and more Plus, go to: www.mhprofessional.com/rbb4 for: Downloadable programs RBB app notes Bonus chapters Make Great Stuff! TAB, an imprint of McGraw-Hill Professional, is a leading publisher of DIY technology books for makers, hackers, and electronics hobbyists.

Download or read book The UBTECH Jimu Robots Builder s Guide written by Mark Rollins and published by Apress. This book was released on 2017-11-16 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create robots and other mechanical devices with UBTECH's Jimu Robots kit. This book shows you the high potential for STEM learning with the Jimu Robots, hardware, and software. You'll design a basic and walking creation and bring to life robots of your own. As UBTECH expands their Jimu Robots into the hands of STEM learners and teachers, this book serves as its official companion, providing an introduction to the Jimu Robots wide range of capabilities. In short, The UBTECH Jimu Robots Builder’s Guide will provide inspiration and innovative potential to existing users and those who are into the growing tech/maker trend of Jimu Robots. What You’ll Learn Use all the latest Jimu Robot pieces and kits Apply practical instructions to build creative Jimu Robot models Improve STEM education with Jimu Robots Assemble creations that users can control via smartphone or tablet Who This Book Is For Educators, makers, tinkerers, and STEM participants

Download or read book The Robot Builder s Bonanza written by Gordon McComb and published by McGraw Hill Professional. This book was released on 2001 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides instructions for building 99 inexpensive robots.

Download or read book Build a Robot written by Steve Parker and published by . This book was released on 2014 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build 3 wind-up robots that walk, wobble and wave

Download or read book The Robot Builder s Bonanza written by Gordon McComb and published by . This book was released on 1987 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes educational but fun projects, from building basic motorized platforms to giving a machine a brain--teaching it to walk and talk and obey commands.

Download or read book Absolute Beginner s Guide to Building Robots written by Gareth Branwyn and published by Que Publishing. This book was released on 2003-09-19 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook version of the printed book. If the print book includes a CD-ROM, this content is not included within the eBook version. A real-world business book for the explosion of eBay entrepreneurs! Absolute Beginner's Guide to Launching an eBay Business guides you step-by-step through the process of setting up an eBay business, and offers real-world advice on how to run that business on a day-to-day basis and maximize financial success. This book covers determining what kind of business to run, writing an action-oriented business plan, establishing an effective accounting system, setting up a home office, obtaining starting inventory, arranging initial funding, establishing an eBay presence, and arranging for automated post-auction management.