Download or read book Road Vehicles written by Christoph Marscholik and published by Laxmi Publications, Ltd.. This book was released on 2009 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The features and amenities we've come to expect from our automobiles are achieved through onboard electronic control units which are connected together by bus systems for the exchange of data (on-board communication). Off-board communication technologies support diagnostic communication between external test equipment (OBD scan tools, HiL test systems, flash stations, workshop testers, etc.) and automotive control units. This volume explains the basics of communication principles, protocols, and various bus systems such as CAN, LIN, FlexRay, and MOST. A detailed description of the diagnostic protocol UDS (Unified Diagnostic Services) is followed by the structure of external test equipment based on the ASAM MCD system, the ISO specification of MVCI (Modular Vehicle Communication Interface), and the ODX format (Open Diagnostic Data Exchange) in minute detail. For clarity, we have included several practical examples from various stages of the process chain, including protocol development, hardware-in-the-loop systems, reprogramming by flash download to a PDA-based OBD Scan Tool, and workshop testers.
Download or read book Diagnostic Communication with Road Vehicles and Non Road Mobile Machinery written by Peter Subke and published by SAE International. This book was released on 2019-03-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic Communication with Road-Vehicles and Non-Road Mobile Machinery examines the communication between a diagnostic tester and E/E systems of road-vehicles and non-road mobile machinery such as agricultural machines and construction equipment. The title also contains the description of E/E systems (control units and in-vehicle networks), the communication protocols (e.g. OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.
Download or read book Diagnostic Communication with Road Vehicles and Non Road Mobile Machinery written by Peter Subke and published by SAE International. This book was released on 2019-03-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic Communication with Road-Vehicles and Non-Road Mobile Machinery examines the communication between a diagnostic tester and E/E systems of road-vehicles and non-road mobile machinery such as agricultural machines and construction equipment. The title also contains the description of E/E systems (control units and in-vehicle networks), the communication protocols (e.g. OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.
Download or read book Automotive Threat Analysis and Risk Assessment in Practice written by Rodrigo do Carmo and published by Springer Nature. This book was released on with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAN System Engineering written by Wolfhard Lawrenz and published by Springer Science & Business Media. This book was released on 2013-12-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the various challenges and open questions relating to CAN communication networks. Opening with a short introduction into the fundamentals of CAN, the book then examines the problems and solutions for the physical layout of networks, including EMC issues and topology layout. Additionally, a discussion of quality issues with a particular focus on test techniques is presented. Each chapter features a collection of illuminating insights and detailed technical information supplied by a selection of internationally-regarded experts from industry and academia. Features: presents thorough coverage of architectures, implementations and application of CAN transceiver, data link layer and so-called higher layer software; explains CAN EMC characteristics and countermeasures, as well as how to design CAN networks; demonstrates how to practically apply and test CAN systems; includes examples of real networks from diverse applications in automotive engineering, avionics, and home heating technology.
Download or read book Building Secure Cars written by Dennis Kengo Oka and published by John Wiley & Sons. This book was released on 2021-03-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: BUILDING SECURE CARS Explores how the automotive industry can address the increased risks of cyberattacks and incorporate security into the software development lifecycle While increased connectivity and advanced software-based automotive systems provide tremendous benefits and improved user experiences, they also make the modern vehicle highly susceptible to cybersecurity attacks. In response, the automotive industry is investing heavily in establishing cybersecurity engineering processes. Written by a seasoned automotive security expert with abundant international industry expertise, Building Secure Cars: Assuring the Automotive Software Development Lifecycle introduces readers to various types of cybersecurity activities, measures, and solutions that can be applied at each stage in the typical automotive development process. This book aims to assist auto industry insiders build more secure cars by incorporating key security measures into their software development lifecycle. Readers will learn to better understand common problems and pitfalls in the development process that lead to security vulnerabilities. To overcome such challenges, this book details how to apply and optimize various automated solutions, which allow software development and test teams to identify and fix vulnerabilities in their products quickly and efficiently. This book balances technical solutions with automotive technologies, making implementation practical. Building Secure Cars is: One of the first books to explain how the automotive industry can address the increased risks of cyberattacks, and how to incorporate security into the software development lifecycle An optimal resource to help improve software security with relevant organizational workflows and technical solutions A complete guide that covers introductory information to more advanced and practical topics Written by an established professional working at the heart of the automotive industry Fully illustrated with tables and visuals, plus real-life problems and suggested solutions to enhance the learning experience This book is written for software development process owners, security policy owners, software developers and engineers, and cybersecurity teams in the automotive industry. All readers will be empowered to improve their organizations’ security postures by understanding and applying the practical technologies and solutions inside.
Download or read book Computer Safety Reliability and Security SAFECOMP 2022 Workshops written by Mario Trapp and published by Springer Nature. This book was released on 2022-09-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Workshops held in conjunction with SAFECOMP 2022, which took place in Munich, Germany, in September 2022. The 23 full papers included in this volume were carefully reviewed and selected from 27 submissions. · 17th International ERCIM/EWICS/ARTEMIS Workshop on Dependable Smart Embedded Cyber-Physical Systems and Systems-of-Systems (DECSoS 2021) · 3rd International Workshop on Dependable Development-Operation Continuum Methods for Dependable Cyber-Physical System (DepDevOps 2022) · 9th International Workshop on Next Generation of System Assurance Approaches for Critical Systems (SASSUR 2022) · 1st International Workshop on Security and Safety Interaction (SENSEI 2022) · 3rd International Workshop on Underpinnings for Safe Distributed Artificial Intelligence (USDAI 2022) · 5th International Workshop on Artificial Intelligence Safety Engineering (WAISE 2022)
Download or read book Smart Cities Policies and Financing written by John R. Vacca and published by Elsevier. This book was released on 2022-01-19 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Cities Policies and Financing: Approaches and Solutions is the definitive professional reference for harnessing the full potential of policy making and financial planning in smart cities. It covers the effective tools for capturing the dynamic relations between people, policies, financing, and environments, and where they are most often useful and effective for all relevant stakeholders. The book examines the key role of science, technology, and innovation (STI) - especially in information and communications technologies - in the design, development, and management of smart cities policies and financing. It identifies the problems and offers practical solutions in implementation of smart infrastructure policies and financing. Smart Cities Policies and Financing is also about how the implementation of smart infrastructure projects (related to the challenges of the lack of financing and the application of suitable policies) underlines the key roles of science, technology and innovation (STI) communities in addressing these challenges and provides key policies and financing that will help guide the design and development of smart cities. - Brings together experts from academia, government and industry to offer state-of- the-art solutions for improving the lives of billions of people in cities around the globe - Creates awareness among governments of the various policy tools available, such as output-based contracting, public-private partnerships, procurement policies, long-term contracting, and targeted research funds in order to promote smart infrastructure implementation, and encouraging the use of such tools to shape markets for smart infrastructure and correct market failures - Ensures the insclusiveness of smart city projects by adequately addressing the special needs of marginalized sections of society including the elderly, persons with disabilities, and inhabitants of informal settlements and informal sectors - Ensures gender considerations in the design of smart cities and infrastructure through the use of data generated by smart systems to make cities safer and more responsive to the needs of women - Demonstrate practical implementation through real-life case studies - Enhances reader comprehension using learning aids such as hands-on exercises, checklists, chapter summaries, review questions, and an extensive appendix of additional resources
Download or read book Automotive Ethernet written by Kirsten Matheus and published by Cambridge University Press. This book was released on 2021-04-22 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about the latest developments in Automotive Ethernet technology and implementation with this fully revised third edition. Including 20% new material and greater technical depth, coverage is expanded to include detailed explanations of the new PHY technologies 10BASE-T1S (including multidrop) and 2.5, 5, and 10GBASE-T1, discussion of EMC interference models, and description of the new TSN standards for automotive use. Featuring details of security concepts, an overview of power saving possibilities with Automotive Ethernet, and explanation of functional safety in the context of Automotive Ethernet. Additionally provides an overview of test strategies and main lessons learned. Industry pioneers share the technical and non-technical decisions that have led to the success of Automotive Ethernet, covering everything from electromagnetic requirements and physical layer technologies, QoS, and the use of VLANs, IP and service discovery, to network architecture and testing. The guide for engineers, technical managers and researchers designing components for in-car electronics, and those interested in the strategy of introducing a new technology.
Download or read book Intelligent Transport Systems Standards written by Bob Williams and published by Artech House. This book was released on 2008 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: To list, summarize, and categorize intelligent transportation standards (ITS). Reviews best practices and provides listings for standards developing organizations at national and international levels. Provides guidance as to where to look in the furute to find relevant standards for ITS. Presents strategies for integrating standards in IRS planning, deployment, and operation.
Download or read book Designing Distributed Control Systems written by Veli-Pekka Eloranta and published by John Wiley & Sons. This book was released on 2014-06-09 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Distributed Control Systems presents 80 patterns for designing distributed machine control system software architecture (forestry machinery, mining drills, elevators, etc.). These patterns originate from state-of-the-art systems from market-leading companies, have been tried and tested, and will address typical challenges in the domain, such as long lifecycle, distribution, real-time and fault tolerance. Each pattern describes a separate design problem that needs to be solved. Solutions are provided, with consequences and trade-offs. Each solution will enable piecemeal growth of the design. Finding a solution is easy, as the patterns are divided into categories based on the problem field the pattern tackles. The design process is guided by different aspects of quality, such as performance and extendibility, which are included in the pattern descriptions. The book also contains an example software architecture designed by leading industry experts using the patterns in the book. The example system introduces the reader to the problem domain and demonstrates how the patterns can be used in a practical system design process. The example architecture shows how useful a toolbox the patterns provide for both novices and experts, guiding the system design process from its beginning to the finest details. Designing distributed machine control systems with patterns ensures high quality in the final product. High-quality systems will improve revenue and guarantee customer satisfaction. As market need changes, the desire to produce a quality machine is not only a primary concern, there is also a need for easy maintenance, to improve efficiency and productivity, as well as the growing importance of environmental values; these all impact machine design. The software of work machines needs to be designed with these new requirements in mind. Designing Distributed Control Systems presents patterns to help tackle these challenges. With proven methodologies from the expert author team, they show readers how to improve the quality and efficiency of distributed control systems.
Download or read book Automotive Software Architectures written by Miroslaw Staron and published by Springer Nature. This book was released on 2021-03-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of software architecture as one of the cornerstones of software in modern cars. Following a historical overview of the evolution of software in modern cars and a discussion of the main challenges driving that evolution, Chapter 2 describes the main architectural styles of automotive software and their use in cars’ software. Chapter 3 details this further by presenting two modern architectural styles, i.e. centralized and federated software architectures. In Chapter 4, readers will find a description of the software development processes used to develop software on the car manufacturers’ side. Chapter 5 then introduces AUTOSAR – an important standard in automotive software. Chapter 6 goes beyond simple architecture and describes the detailed design process for automotive software using Simulink, helping readers to understand how detailed design links to high-level design. The new chapter 7 reports on how machine learning is exploited in automotive software e.g. for image recognition and how both on-board and off-board learning are applied. Next, Chapter 8 presents a method for assessing the quality of the architecture – ATAM (Architecture Trade-off Analysis Method) – and provides a sample assessment, while Chapter 9 presents an alternative way of assessing the architecture, namely by using quantitative measures and indicators. Subsequently Chapter 10 dives deeper into one of the specific properties discussed in Chapter 8 – safety – and details an important standard in that area, the ISO/IEC 26262 norm. Lastly, Chapter 11 presents a set of future trends that are currently emerging and have the potential to shape automotive software engineering in the coming years. This book explores the concept of software architecture for modern cars and is intended for both beginning and advanced software designers. It mainly aims at two different groups of audience – professionals working with automotive software who need to understand concepts related to automotive architectures, and students of software engineering or related fields who need to understand the specifics of automotive software to be able to construct cars or their components. Accordingly, the book also contains a wealth of real-world examples illustrating the concepts discussed and requires no prior background in the automotive domain. Compared to the first edition, besides the two new chapters 3 and 7 there are considerable updates in chapters 5 and 8 especially.
Download or read book Material Strength and Applied Mechanics written by A. Khotsianovsky and published by IOS Press. This book was released on 2023-10-03 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keeping abreast of the latest developments in materials technology and techniques is vital to a wide range of sectors such as aerospace, the automotive industry, and mechanical and civil engineering. A knowledge and understanding of the latest research is crucial to facilitate the adoption of appropriate solutions in tackling those challenges that will inevitably be encountered. This book presents the proceedings of MSAM 2023, the 6th International Conference on Material Strength and Applied Mechanics, held as a hybrid event from 4-7 July 2023 in Macau, China. This annual conference provides a platform for all those engaged in basic or applied research, technology development, application, and innovation in material strength and applied mechanics to exchange information and ideas about the latest research in the field, and is attended by scientists and experts from academia and industry from around the world. The book contains 17 papers accepted from 50 submissions received for presentation at the conference. These were selected following a rigorous peer-review process, in which each paper was assessed by two or three reviewers on the basis of criteria including scope, application, research merit, and experimental techniques. Topics covered include applied mechanics, intelligent manufacturing technology, mechanical engineering, optimal design of structures, advanced materials sciences, computational methods and modeling, simulation processes, and industrial applications. The book offers an overview of the latest advancements in material strength and applied mechanics, and will be of interest to all those working in the field.
Download or read book Federal Register written by and published by . This book was released on 1997-05-28 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB 17691 2018 English Translation of Chinese Standard written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Application scope This standard specifies the emission limits and measurement methods for gaseous and particulate pollutants from vehicles equipped with compression-ignition engines and their engines as well as those for gaseous pollutants from vehicles equipped with natural gas (NG) or liquefied petroleum gas (LPG) fuelled positive ignition engines and their engines. This standard is applicable to the type test, checking of conformity of production, newly produced vehicle emission supervision inspection and in-service conformity inspection of vehicles of categories M2, M3, N1, N2 and N3 equipped with compression-ignition engines and gas fuelled positive ignition engines and vehicles of category M1 with a total mass exceeding 3,500kg as well as their engines. The type test of a complete vehicle given under this standard may be extended to its variants and versions with a reference mass above 2,380kg. The vehicles of categories M1, M2, N1 and N2 equipped with compression-ignition engines and gas fuelled positive ignition engines which have been subjected to type test in accordance with GB 18352.6-2016 may not be subjected to type test in accordance with this standard.
Download or read book Road Vehicles Diagnostics on Controller Area Networks CAN written by and published by . This book was released on 2004 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Networks written by Piotr Gaj and published by Springer. This book was released on 2017-05-27 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 24th International Conference on Computer Networks, CN 2017, held in Brunów, Poland, in June 2017. The 35 full papers presented were carefully reviewed and selected from 80 submissions. They are dealing with the topics computer networks; teleinformatics and telecommunications; new technologies; queueing theory; innovative applications.
