Download or read book Riveted Lap Joints in Aircraft Fuselage written by Andrzej Skorupa and published by Springer Science & Business Media. This book was released on 2012-06-23 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of the pressurized fuselages of transport aircraft is a significant problem all builders and users of aircraft have to cope with for reasons associated with assuring a sufficient lifetime and safety, and formulating adequate inspection procedures. These aspects are all addressed in various formal protocols for creating and maintaining airworthiness, including damage tolerance considerations. In most transport aircraft, fatigue occurs in lap joints, sometimes leading to circumstances that threaten safety in critical ways. The problem of fatigue of lap joints has been considerably enlarged by the goal of extending aircraft lifetimes. Fatigue of riveted lap joints between aluminium alloy sheets, typical of the pressurized aircraft fuselage, is the major topic of the present book. The richly illustrated and well-structured chapters treat subjects such as: structural design solutions and loading conditions for fuselage skin joints; relevance of laboratory test results for simple lap joint specimens to riveted joints in a real structure; effect of various production and design related variables on the riveted joint fatigue behaviour; analytical and experimental results on load transmission in mechanically fastened lap joints; theoretical and experimental analysis of secondary bending and its implications for riveted joint fatigue performance; nucleation and shape development of fatigue cracks in riveted longitudinal lap joints; overview of experimental investigations into the multi-site damage for full scale fuselage panels and riveted lap joint specimens; fatigue crack growth and fatigue life prediction methodology for riveted lap joints; residual strength predictions for riveted lap joints in a fuselage structure. The major issues of each chapter are recapitulated in the last section.
Download or read book Residual Strength Analyses of Riveted Lap splice Joints written by B. R. Seshadri and published by . This book was released on 2000 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this paper was to analyze the crack-linkup behavior in riveted lap-splice joint panels with small multiple-site damage (MSD) cracks at several adjacent rivet holes. Analyses are based on the STAGS (STructural Analysis of General Shells) code with the critical crack-tip-opening angle (CTOA) fracture criterion. To account for high constraint around a crack front, the "plane strain core" option in STAGS was used. The importance of modelling rivet flexibility with fastener elements that accurately model load transfer across the joint is discussed. Fastener holes are not modeled but rivet connectivity is accounted for by attaching rivets to the sheet on one side of the cracks that simulated both the rivet diameter and MSD cracks. Residual strength analyses made on 2024-T3 alloy (1.6-mm thick) riveted lap-splice joints with a lead crack and various size MSD cracks were compared with test data from Boeing Airplane Company. Analyses were conducted for both restrained and unrestrained buckling conditions. Comparison of results from these analyses and results from lap-splice-joint test panels, which were partially restrained against buckling indicate that the test results were bounded by the failure loads predicted by the analyses with restrained and unrestrained conditions.
Download or read book Aircraft Sustainment and Repair written by Rhys Jones and published by Butterworth-Heinemann. This book was released on 2017-12-15 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. Covers corrosion damage assessment and management in aircraft structures Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services
Download or read book Fibre Metal Laminates written by Ad Vlot and published by Springer Science & Business Media. This book was released on 2001-09-30 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like New, No Highlights,No Markup,all pages are intact.
Download or read book Load Transmission and Secondary Bending in Lap Joints of Aircraft Fuselage written by Andrzej Skorupa and published by . This book was released on 2010 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Structures and Materials written by Yucheng Liu and published by Bentham Science Publishers. This book was released on 2016-10-07 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume presents a wide spectrum of information about the design, analysis and manufacturing of aerospace structures and materials. Readers will find an interesting compilation of reviews covering several topics such as structural dynamics and impact simulation, acoustic and vibration testing and analysis, fatigue analysis and life optimization, reversing design methodology, non-destructive evaluation, remotely piloted helicopters, surface enhancement of aerospace alloys, manufacturing of metal matrix composites, applications of carbon nanotubes in aircraft material design, carbon fiber reinforcements, variable stiffness composites, aircraft material selection, and much more. This volume is a key reference for graduates undertaking advanced courses in materials science and aeronautical engineering as well as researchers and professional engineers seeking to increase their understanding of aircraft material selection and design.
Download or read book The Characteristics of Fatigue Damage in the Fuselage Riveted Lap Splice Joint written by Robert S. Piascik and published by . This book was released on 1997 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Engineering Approach to Predicting Fatigue Crack Growth in Riveted Lap Joints written by C. E. Harris and published by . This book was released on 2000 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive experimental database has been assembled from very detailed teardown examinations of fatigue cracks found in rivet holes of fuselage structural components. Based on this experimental database, a comprehensive analysis methodology was developed to predict the onset of widespread fatigue damage in lap joints of fuselage structure. Several computer codes were developed with specialized capabilities to conduct the various analyses that make up the comprehensive methodology. Over the past several years, the authors have interrogated various aspects of the analysis methods to determine the degree of computational rigor required to produce numerical predictions with acceptable engineering accuracy. This study led to the formulation of a practical engineering approach to predicting fatigue crack growth in riveted lap joints. This paper describes the practical engineering approach and compares predictions with the results from several experimental studies.
Download or read book ICAF 2009 Bridging the Gap between Theory and Operational Practice written by M. Bos and published by Springer Science & Business Media. This book was released on 2009-05-24 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 31st Conference and the 25th Symposium of the International Committee on Aeronautical Fatigue will be hosted in Rotterdam, The Netherlands, by the National Aerospace Laboratory NLR, under the auspices of the Netherlands Association of Aeronautical Engineers NVvL, the Technical University of Delft and Stork Fokker AESP B.V. These Proceedings will consist of reviews of aeronautical fatigue activities presented by the national delegates of the 14 member nations of ICAF. It will also contain specialist papers presented by international authors with design, manufacturing, airworthiness regulations, operations and research backgrounds. The papers will be based on the theme “Bridging the gap between theory and operational practice”.
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Welding and Joining of Aerospace Materials written by Mahesh Chaturvedi and published by Elsevier. This book was released on 2011-12-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding and joining techniques play an essential role in both the manufacture and in-service repair of aerospace structures and components, and these techniques become more advanced as new, complex materials are developed. Welding and joining of aerospace materials provides an in-depth review of different techniques for joining metallic and non-metallic aerospace materials.Part one opens with a chapter on recently developed welding techniques for aerospace materials. The next few chapters focus on different types of welding such as inertia friction, laser and hybrid laser-arc welding. The final chapter in part one discusses the important issue of heat affected zone cracking in welded superalloys. Part two covers other joining techniques, including chapters on riveting, composite-to-metal bonding, diffusion bonding and recent improvements in bonding metals. Part two concludes with a chapter focusing on the use of high-temperature brazing in aerospace engineering. Finally, an appendix to the book covers the important issue of linear friction welding.With its distinguished editor and international team of contributors, Welding and joining of aerospace materials is an essential reference for engineers and designers in the aerospace, materials and welding and joining industries, as well as companies and other organisations operating in these sectors and all those with an academic research interest in the subject. Provides an in-depth review of different techniques for joining metallic and non-metallic aerospace materials Discusses the important issue of heat affected zone cracking in welded superalloys Covers many joining techniques, including riveting, composite-to-metal bonding and diffusion bonding
Download or read book ICAF 2019 Structural Integrity in the Age of Additive Manufacturing written by Antoni Niepokolczycki and published by Springer. This book was released on 2019-07-03 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the 36th conference and 30th Symposium of the International Committee on Aeronautical Fatigue and Structural integrity. Focusing on the main theme of “Structural Integrity in the Age of Additive Manufacturing”, the chapters cover different aspects concerning research, developments and challenges in this field, offering a timely reference guide to designers, regulators, manufacturer, and both researchers and professionals of the broad aerospace community.
Download or read book Structural Integrity of Aging Airplanes written by Satya N. Atluri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of civil aviation as a means of mass transportation is primarily due to the large scale construction of jet airplanes in the past 30 years or so. A large number of these jet airplanes is currently operating at or beyond their designed fatigue lives. Thus, the structural integrity of these aging airplanes has become an issue of major concern to all nations of the world. To bring the needed technical and research focus on the issues involved in the life-enhancement and safety-assurance of aging airplanes, the Federal Aviation Administration sponsored a symposium in Atlanta, GA, USA, during 20-22 March 1990. This symposium, under the title "International Symposium on Structural Integrity of Aging Airplanes· was organized jointly be the Georgia Institute of Technology (Center for Computational Mechanics) and the Transportation Systems Center (Cambridge, MA) of the U.S. Department of Transportation. Industrial and academic experts from several countries in North America, Europe and Asia, were invited to discuss their experiences and proposed solutions. This monograph contains the original papers that represent the expanded and edited versions of the talks presented at this symposium. This book aims to bring the collective experience, from across the world, with problems related to the structural integrity of aging airplanes to the attention of the professional and research community at large - in the hope that it may stimulate further fruitful research on this important topic of global concern.
Download or read book The Second Joint NASA FAA DoD Conference on Aging Aircraft written by and published by . This book was released on 1999 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesive Bonding of Aircraft Composite Structures written by Welchy Leite Cavalcanti and published by Springer. This book was released on 2021-06-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license. It presents the results of the ComBoNDT European project, which aimed at the development of more secure, time- and cost-saving extended non-destructive inspection tools for carbon fiber reinforced plastics, adhered surfaces and bonded joints. The book reports the optimal use of composite materials to allow weight savings, reduction in fuel consumptions, savings during production and higher cost efficiency for ground operations.
Download or read book Acceptable Methods Techniques and Practices written by and published by . This book was released on 1988 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Tolerance of Metallic Aircraft Structures written by Sérgio M. O. Tavares and published by Springer. This book was released on 2018-08-06 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art review of the fail-safe and damage tolerance approaches, allowing weight savings and increasing aircraft reliability and structural integrity. The application of the damage tolerance approach requires extensive know-how of the fatigue and fracture properties, corrosion strength, potential failure modes and non-destructive inspection techniques, particularly minimum detectable defect and inspection intervals. In parallel, engineering practice involving damage tolerance requires numerical techniques for stress analysis of cracked structures. These evolved from basic mode I evaluations using rough finite element approaches, to current 3D modeling based on energetic approaches as the VCCT, or simulation of joining processes. This book provides a concise introduction to this subject.
