Download or read book Risk Management Series Designing for Earthquakes A Manual for Architects written by Federal Emergency Agency and published by FEMA. This book was released on 2013-04-14 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes in the United States are regional in their occurrence and while California is famous for its earthquake other states, such as Texas, have much less concern for the threat of temblors. However, architectural practice is becoming increasingly national and global, and the architect in Texas may find that the next project is in California. Thus it has become necessary for the professional architect to have some knowledge of the earthquake problem and how design seeks to control it. Designing for Earthquakes: a Manual for Architects is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know. Because of its non-technical approach this publication will also be useful to anyone who has an interest and concern for the seismic protection of buildings, including facility managers, building owners and tenants, building committee participants, emergency service personnel and building officials. Engineers and engineering students will also gain from this discussion of seismic design from an architectural viewpoint. The principles discussed are applicable to a wide range of building types, both new and existing. The focus is on buildings that are designed by a team that includes architects, engineers and other consultants.

Download or read book Designing for Earthquakes written by Federal Emergency Management Agency and published by www.Militarybookshop.CompanyUK. This book was released on 2006-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This full color manual is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know.

Download or read book Risk Management Series Design Guide for Improving Hospital Safety in Earthquakes Floods and High Winds written by and published by FEMA. This book was released on with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Primer for Design Professionals written by Federal Emergency Management Agency and published by FEMA. This book was released on 2004 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Resistant Design written by David J. Dowrick and published by Wiley-Blackwell. This book was released on 1987 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of a book which has proved useful to large numbers of engineers and architects since it was first published.

Download or read book Catalog of FEMA Earthquake Resources written by United States. Federal Emergency Management Agency and published by FEMA. This book was released on 2013 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.

Download or read book Damping Technologies for Tall Buildings written by Alberto Lago and published by Butterworth-Heinemann. This book was released on 2018-09-25 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damping Technologies for Tall Buildings provides practical advice on the selection, design, installation and testing of damping systems. Richly illustrated with images and schematics, this book presents expert commentary on different damping systems, giving readers a way to accurately compare between different device categories and gain and understand the advantages and disadvantages of each. In addition, the book covers their economical and sustainability implications. Case studies are included to provide a direct understanding on the possible applications of each device category. Provides an expert guide on the selection and deployment of the various types of damping technologies Drawn from extensive contributions from international experts and research projects that represent the current state-of-the-art and design in damping technologies Includes 25+ real case studies collected with very detailed information on damping design, installation, testing and other building implications

Download or read book Earthquake Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2003-09-12 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing theory and field experience, this book covers all the main subject areas in earthquake risk reduction, ranging from geology, seismology, structural and soil dynamics to hazard and risk assessment, risk management and planning, engineering and the architectural design of new structures and equipment. Earthquake Risk Reduction outlines individual national weaknesses that contribute to earthquake risk to people and property; calculates the seismic response of soils and structures, using the structural continuum 'Subsoil - Substructure - Superstructure - Non-structure'; evaluates the effectiveness of given designs and construction procedures for reducing casualties and financial losses; provides guidance on the key issue of choice of structural form; presents earthquake resistant designs methods for the four main structural materials - steel, concrete, reinforced masonry and timber - as well as for services equipment, plant and non-structural architectural components; contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment. Compiled from the author's extensive professional experience in earthquake engineering, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake risk reduction. This book will prove an invaluable reference and guiding tool to practicing civil and structural engineers and architects, researchers and postgraduate students in seismology, local governments and risk management officials.

Download or read book Risk Management Series Design Guide for Improving School Safety in Earthquakes Floods and High Winds written by and published by FEMA. This book was released on with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Eurocode Compliant Seismic Analysis and Design of R C Buildings written by Ioannis Avramidis and published by Springer. This book was released on 2015-11-18 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to serve as an essential reference to facilitate civil engineers involved in the design of new conventional (ordinary) reinforced concrete (R/C) buildings regulatedby the current European EC8 (EN 1998-1:2004) and EC2 (EN 1992-1-1:2004) codesof practice. The book provides unique step-by-step flowcharts which take the readerthrough all the required operations, calculations, and verification checks prescribed bythe EC8 provisions. These flowcharts are complemented by comprehensive discussionsand practical explanatory comments on critical aspects of the EC8 code-regulatedprocedure for the earthquake resistant design of R/C buildings. Further, detailedanalysis and design examples of typical multi-storey three-dimensional R/C buildingsare included to illustrate the required steps for achieving designs of real-life structures which comply with the current EC8 provisions. These examples can be readily used as verification tutorials to check the reliability of custom-made computer programs and of commercial Finite Element software developed/used for the design of earthquakeresistant R/C buildings complying with the EC8 (EN 1998-1:2004) code.This book will be of interest to practitioners working in consulting and designingengineering companies and to advanced undergraduate and postgraduate level civilengineering students attending courses and curricula in the earthquake resistant designof structures and/or undertaking pertinent design projects.

Download or read book Risk Management Series Primer for Design Professionals Communicating with Owners and Managers of New Buildings on Earthquake Risk FEMA 389 January 2004 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-01-27 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic risk management tools, including new seismic engineering technology and data, are now available to assist with evaluating, predicting, and controlling financial and personal-injury losses from future damaging earthquakes. These tools have evolved as a result of scientific and engineering breakthroughs, including new earth-science knowledge about the occurrence and severity of earthquake shaking, and new engineering techniques for designing building systems and components to withstand the effects of earthquakes. As a result, design and construction professionals can now design and construct new buildings with more predictable seismic performance than ever before. Seismic risks can be managed effectively in a number of ways, including the design and construction of better performing buildings as well as the employment of strategies that can result in risk reduction over the life of the building. Risk reduction techniques include the use of new technologies, such as seismic isolation and energy dissipation devices for both structural and nonstructural systems; site selection to avoid hazards such as ground motion amplification, landslide, and liquefaction; and the use of performance-based design concepts, which enable the engineer to better estimate building capacity and seismic loading demand and to design buildings for enhanced performance (beyond that typically provided by current seismic codes). The implementation of risk reduction strategies by building owners and managers is critically important, not only for reducing the likelihood of life loss and injury, but also for reducing the potential for losses associated with earthquake damage repair and business interruption. The Federal Emergency Management Agency (FEMA) has commissioned and funded the development of this document to facilitate the process of educating building owners and managers about seismic risk management tools that can be effectively and economically employed by them during the building development phase – from site selection through design and construction – as well as the operational phase. The objectives of this report are fourfold: (1) to summarize, in a qualitative fashion, important new concepts in performance-based seismic design and new knowledge about the seismic hazard facing the United States (in a way that can be easily communicated to building owners and managers); (2) to describe a variety of concepts for reducing seismic risk, including the means to reduce economic losses that are not related to engineering solutions; (3) to provide illustrative examples and graphical tools that can be used by the design community to more effectively “sell” concepts of seismic risk management and building performance improvements; and (4) to establish a means by which seismic engineering and financial risk management can be integrated to form a holistic seismic risk management plan. The overarching goal of the document is to provide a means to facilitate communications between building owners/managers and design professionals on the important issues affecting seismic risk decision making during the design and construction of new facilities, as well as the operational phase. Stated another way, this report may be considered as a framework for integrating seismic risk management into already well-established project planning, design, and construction processes used by most owners and designers.

Download or read book Risk Management Series Safe Rooms and Shelters Protecting People Agains Terrorist Attacks written by Federal Emergency Agency and published by FEMA. This book was released on 2013-01-26 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to provide guidance for engineers, architects, building officials, and property owners to design shelters and safe rooms in buildings. It presents information about the design and construction of shelters in the work place, home, or community building that will provide protection in response to manmade hazards. The information contained herein will assist in the planning and design of shelters that may be constructed outside or within dwellings or public buildings. These safe rooms will protect occupants from a variety of hazards, including debris impact, accidental or intentional explosive detonation, and the accidental or intentional release of a toxic substance into the air. Safe rooms may also be designed to protect individuals from assaults and attempted kidnapping, which requires design features to resist forced entry and ballistic impact. This covers a range of protective options, from low-cost expedient protection (what is commonly referred to as sheltering-in-place) to safe rooms ventilated and pressurized with air purified by ultra-high-efficiency filters. These safe rooms protect against toxic gases, vapors, and aerosols. The contents of this manual supplement the information provided in FEMA 361, Design and Construction Guidance for Community Shelters and FEMA 320, Taking Shelter From the Storm: Building a Safe Room Inside Your House. In conjunction with FEMA 361 and FEMA 320, this publication can be used for the protection of shelters against natural disasters. This guidance focuses on safe rooms as standby systems, ones that do not provide protection on a continuous basis. To employ a standby system requires warning based on knowledge that a hazardous condition exists or is imminent. Protection is initiated as a result of warnings from civil authorities about a release of hazardous materials, visible or audible indications of a release (e.g., explosion or fire), the odor of a chemical agent, or observed symptoms of exposure in people. Although there are automatic detectors for chemical agents, such detectors are expensive and limited in the number of agents that can be reliably detected. Furthermore, at this point in time, these detectors take too long to identify the agent to be useful in making decisions in response to an attack. Similarly, an explosive vehicle or suicide bomber attack rarely provides advance warning; therefore, the shelter is most likely to be used after the fact to protect occupants until it is safe to evacuate the building. Two different types of shelters may be considered for emergency use, standalone shelters and internal shelters. A standalone shelter is a separate building (i.e., not within or attached to any other building) that is designed and constructed to withstand the range of natural and manmade hazards. An internal shelter is a specially designed and constructed room or area within or attached to a larger building that is structurally independent of the larger building and is able to withstand the range of natural and manmade hazards. Both standalone and internal shelters are intended to provide emergency refuge for occupants of commercial office buildings, school buildings, hospitals, apartment buildings, and private homes from the hazards resulting from a wide variety of extreme events. The shelters may be used during natural disasters following the warning that an explosive device may be activated, the discovery of an explosive device, or until safe evacuation is established following the detonation of an explosive device or the release of a toxic substance via an intentional aerosol attack or an industrial accident. Standalone community shelters may be constructed in neighborhoods where existing homes lack shelters. Community shelters may be intended for use by the occupants of buildings they are constructed within or near, or they may be intended for use by the residents of surrounding or nearby neighborhoods or designated areas.

Download or read book Precast concrete buildings in seismic areas written by FIB – Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.

Download or read book Buildings at Risk written by Christopher Arnold and published by . This book was released on 1992 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering

Download or read book Earthquake Resistant Design and Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2009-07-20 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Resistant Design and Risk Reduction, 2nd edition is based upon global research and development work over the last 50 years or more, and follows the author’s series of three books Earthquake Resistant Design, 1st and 2nd editions (1977 and 1987), and Earthquake Risk Reduction (2003). Many advances have been made since the 2003 edition of Earthquake Risk Reduction, and there is every sign that this rate of progress will continue apace in the years to come. Compiled from the author’s wide design and research experience in earthquake engineering and engineering seismology, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake resistant design and risk reduction. New topics include the creation of low-damage structures and the spatial distribution of ground shaking near large fault ruptures. Sections on guidance for developing countries, response of buildings to differential settlement in liquefaction, performance-based and displacement-based design and the architectural aspects of earthquake resistant design are heavily revised. This book: Outlines individual national weaknesses that contribute to earthquake risk to people and property Calculates the seismic response of soils and structures, using the structural continuum “Subsoil – Substructure – Superstructure – Non–structure” Evaluates the effectiveness of given design and construction procedures for reducing casualties and financial losses Provides guidance on the key issue of choice of structural form Presents earthquake resistant design methods for the main four structural materials – steel, concrete, reinforced masonry and timber – as well as for services equipment, plant and non-structural architectural components Contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment This book is an invaluable reference and guiding tool to practising civil and structural engineers and architects, researchers and postgraduate students in earthquake engineering and engineering seismology, local governments and risk management officials.