Download or read book Risk Assessment and Risk Management for the Chemical Process Industry written by Stone & Webster Engineering Corporation and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tragic incident at Bhopal, India made it clear that safetyreviews for identification and control of accidents involving toxicchemicals must be more systematic. This guide shows how tointegrate hazard identification, risk assessment, consequenceanalysis, and risk mitigation into a formalized program forhandling hazardous chemicals. Most of the 21 contributors aresenior staff members at Stone & Webster EngineeringCorporation. They discuss how to perform and supervise safetystudies for chemical, petrochemical, petroleum refining, and otherfacilities. They discuss all aspects of detection, prevention, andmitigation of risks associated with processing, handling, andproduction of hazardous chemicals. Special attention is given tohazard identification and hazard assessment techniques ranging fromsimple screening checklists to highly structured Hazard andOperability (HAZOP) analysis. You're shown how to calculatepotential consequences of identified hazards, quantify thelikelihood of these events, and combine equipment failure rate dataand human reliability analysis with hazard assessment. You'll alsobenefit from the book's rundowns of how to * apply expert systems and artificial intelligence in riskmanagement * instill safety-oriented operating and maintenanceprocedures * train operators and emergency response personnel * conduct internal and external safety audits * perform chemical dispersion, explosion, and fire analyses * assess health effects from chemical releases * use insurance vehicles to deal with residual risk. Risk Assessment and Risk Management for the Chemical ProcessIndustry is an essential source on minimizing the dangers of toxicincidents and accidents. It is essential reading for safetyengineers, regulatory managers, environmental engineers, and otherprofessionals responsible for safety in chemical plants.

Download or read book Risk Analysis and Reduction in the Chemical Process Industry written by J.M. Santamaría Ramiro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern for the environment has become one of the big issues in modern society, and one of the chief concerns is the environmental impact of modern industrial production. A particularly sensitive issue is the possibility of accidents in industries where there may be severe consequences for people, property and the environment. At one time the nuclear industry was seen as the most likely to be the cause of significant environmental damage, but after the occurrence of several major accidents such as Seveso, Flixborough and Bhopal, that concern extends to much of the chemicals industry. Pressure from society, reflected by strong legislation, coupled with a greater understanding of the impact that chemical processing operations can have, has led to the adoption of higher profile safety and environmental management programs within the chemical industry. Under these programmes existing and new processes are rigorously examined to determine the possible causes and consequences of failure, and the results used to improve the process to make failure less likely. Any process audit, aimed at improving safety or lessening the environmental impact, cannot be carried out using intuition or experience alone, so the discipline of risk analysis has grown as a collection of tools and methods which can be utilized to give a quantitative assessment of the risks involved in operating any given process. In this new book the authors present risk analysis and reduction in a clear and unified way, emphasizing the various different methods which can be used together in a global approach to risk analysis in the chemical process industries. Originally conceived as a text book for graduate level courses in chemical engineering, the clear presentation and thorough coverage will ensure that anyone involved in risk assessment, environmental impact assessment or safety planning will find this book an invaluable source of reference.

Download or read book Bow Ties in Risk Management written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-10-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN AUTHORITATIVE GUIDE THAT EXPLAINS THE EFFECTIVENESS AND IMPLEMENTATION OF BOW TIE ANALYSIS, A QUALITATIVE RISK ASSESSMENT AND BARRIER MANAGEMENT METHODOLOGY From a collaborative effort of the Center for Chemical Process Safety (CCPS) and the Energy Institute (EI) comes an invaluable book that puts the focus on a specific qualitative risk management methodology – bow tie barrier analysis. The book contains practical advice for conducting an effective bow tie analysis and offers guidance for creating bow tie diagrams for process safety and risk management. Bow Ties in Risk Management clearly shows how bow tie analysis and diagrams fit into an overall process safety and risk management framework. Implementing the methods outlined in this book will improve the quality of bow tie analysis and bow tie diagrams across an organization and the industry. This important guide: Explains the proven concept of bow tie barrier analysis for the preventing and mitigation of incident pathways, especially related to major accidents Shows how to avoid common pitfalls and is filled with real-world examples Explains the practical application of the bow tie method throughout an organization Reveals how to treat human and organizational factors in a sound and practical manner Includes additional material available online Although this book is written primarily for anyone involved with or responsible for managing process safety risks, this book is applicable to anyone using bow tie risk management practices in other safety and environmental or Enterprise Risk Management applications. It is designed for a wide audience, from beginners with little to no background in barrier management, to experienced professionals who may already be familiar with bow ties, their elements, the methodology, and their relation to risk management. The missions of both the CCPS and EI include developing and disseminating knowledge, skills, and good practices to protect people, property and the environment by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 30 years. The EI's Technical Work Program addresses the depth and breadth of the energy sector, from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.

Download or read book Guidelines for Chemical Process Quantitative Risk Analysis written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical process quantitative risk analysis (CPQRA) as applied to the CPI was first fully described in the first edition of this CCPS Guidelines book. This second edition is packed with information reflecting advances in this evolving methodology, and includes worked examples on a CD-ROM. CPQRA is used to identify incident scenarios and evaluate their risk by defining the probability of failure, the various consequences and the potential impact of those consequences. It is an invaluable methodology to evaluate these when qualitative analysis cannot provide adequate understanding and when more information is needed for risk management. This technique provides a means to evaluate acute hazards and alternative risk reduction strategies, and identify areas for cost-effective risk reduction. There are no simple answers when complex issues are concerned, but CPQRA2 offers a cogent, well-illustrated guide to applying these risk-analysis techniques, particularly to risk control studies. Special Details: Includes CD-ROM with example problems worked using Excel and Quattro Pro. For use with Windows 95, 98, and NT.

Download or read book Thermal Safety of Chemical Processes written by Francis Stoessel and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's many years of experience in practicing safety assessment in industry and teaching students or professionals in this area, the topic of this book is seldom found on university curricula and many professionals do not have the knowledge required to interpret thermal data in terms of risks. For this reason, Francis Stoessel adopts a unique systematic how-to-do approach: Each chapter begins with a case history illustrating the topic and presenting the lessons learned from the incident. In so doing, he analyzes a goldmine of numerous examples stemming from industrial practice, additionally providing a series of problems or case studies at the end of each chapter. Divided into three distinct sections, part one looks at the general aspects of thermal process safety, while Part 2 deals with mastering exothermal reactions. The final section discusses the avoidance of secondary reactions, including heat accumulation and thermal confinement.

Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.

Download or read book Risk Assessment Methods for Biological and Chemical Hazards in Food written by Fernando Pérez-Rodríguez and published by CRC Press. This book was released on 2020-10-28 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk assessment has been extensively developed in several scientific fields, such as environmental science, economics, and civil engineering, among others. In the aftermath of the SPS and GATT agreements on the use of risk analysis framework in food trade, signed in the 1990s, international organisations and governments adopted risk assessment as a science-based process to ensure food safety along the food chain. The food industry can also benefit from the use of this approach for food process optimisation and quality assurance. Risk Assessment Methods for Biological and Chemical Hazards in Food introduces the reader to quantitative risk assessment methods encompassing general concepts to specific applications to biological and chemical hazards in foods. In the first section, the book presents food risk assessment as methodology and addresses, more specifically, new trends and approaches such as the development of risk rating methods, risk metrics, risk-benefit assessment studies and quality assessment methods. Section II is dedicated to biological hazards. This section identifies the most relevant biological hazards along the food chain and provides an overview on the types of predictive microbiology models used to describe the microbial response along the food chain. Chapter 12 specifically deals with cross contamination and the quantitative methods that can be applied to describe this relevant microbial process. The development and application of dose-response models (i.e. mathematical function describing the relationship between pathogen dose and health response) are also covered in this section. In Section III, the book translates risk assessment concepts into the area of chemical hazards, defining the process steps to determine chemical risk and describing the uncertainty and variability sources associated with chemicals. Key Features: Presents new trends and approaches in the field of risk assessment in foods Risk assessment concepts are illustrated by practical examples in the food sector Discusses how quantitative information and models are integrated in a quantitative risk asssment framework Provides examples of applications of quantitative chemical risk assessment in risk management The book, written by renowned experts in their field, is a comprehensive collection of quantitative methods and approaches applied to risk assessment in foods. It can be used as an extensive guide for food safety practitioners and researchers to perform quantitative risk assessment in foods

Download or read book Hazards and Safety in Process Industries written by Mihir Kumar Purkait and published by CRC Press. This book was released on 2021-03-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in process industries is of utmost necessity to ensure protection from hazards. The aim of this book is to elucidate the hazards and preventive measures for a few of such specific industrial processes. Starting with overview of the prevalent industrial accidents, types of hazards and safety provisions, the book contains nineteen chapters with each one of them consisting of a unique case study comprising of basic causes, results and discussion, and protective measures to be adopted to overcome such situation. Topics covered include caprolactam storage tank accident, fire explosion accident caused by static electricity, and human factors risk and management in process safety and so forth. Aimed at researchers, professionals, graduate students in Chemical Engineering, Safety Management, Risk Assessment, Chemical Process Safety, this book: Provides exhaustive coverage of industrial case studies on their hazards and safety issues in the process industry set-up. Includes quantitative discussion on new and existing technologies and methodologies. Explores high quality descriptive and quantified data for better visualization of each chapter. Gives detailed description on various industrial accidents, their related consequences and available safety/preventive measures. Discusses preventive measures taken by world class industries in their production plants.

Download or read book Thermal Safety of Chemical Processes written by Francis Stoessel and published by John Wiley & Sons. This book was released on 2021-05-24 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vollständig überarbeitete,aktualisierte 2. Auflage mit fünf neuen Kapiteln und den aktuellen IUPAC-Normen. Beschäftigt sich mit thermischen Risiken in der chemischen Prozessindustrie. Jedes Kapitel beginnt mit einer Fallstudie und den aus Zwischenfällen gewonnen Erkenntnissen.

Download or read book Risk Assessment in the Federal Government written by National Research Council and published by National Academies Press. This book was released on 1983-02-01 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The regulation of potentially hazardous substances has become a controversial issue. This volume evaluates past efforts to develop and use risk assessment guidelines, reviews the experience of regulatory agencies with different administrative arrangements for risk assessment, and evaluates various proposals to modify procedures. The book's conclusions and recommendations can be applied across the entire field of environmental health.

Download or read book Risk Management and Education written by Thierry Meyer and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-05-20 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk and Safety Management are crucial aspects in chemical industry and academic laboratories. From their rich experience in academic education and industrial practice, the authors present options for professional training addressing engineers and scientists at different career levels. The book informs about existing norms (OHSAS, ISO, etc.) and discusses examples from several countries.

Download or read book Managing Risk and Reliability of Process Plants written by Mark Tweeddale and published by Elsevier. This book was released on 2003-07-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is much specialist material written about different elements of managing risks of hazardous industries, such as hazard identification, risk analysis, and risk management. Managing Risk and Reliability of Process Plants provides a systematic and integrated coverage of all these elements in sufficient detail for the reader to be able to pursue more detailed study of particular elements or topics from a good appreciation of the whole field. The reader would use this book to keep up to date with new developments and, if they are new to the job, to learn more about the subject. The text includes a chapter of case studies and worked examples - including examples of risk assessments, which is consistent with the approach taken throughout the book of applying real-life scenarios and approaches.* Provides a source for reasonable understanding across the whole field of risk management and risk assessment. * Focuses on the how, what, and why of risk management using a consistent and well organized writing style interspersed with case studies, examples, exercises, as well as end matter.* Fills a need in the area of risk assessment and risk management in the process and chemical engineering industry as an essential multi-audience reference/resource tool, useful to managers and students.

Download or read book Science and Decisions written by National Research Council and published by National Academies Press. This book was released on 2009-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk assessment has become a dominant public policy tool for making choices, based on limited resources, to protect public health and the environment. It has been instrumental to the mission of the U.S. Environmental Protection Agency (EPA) as well as other federal agencies in evaluating public health concerns, informing regulatory and technological decisions, prioritizing research needs and funding, and in developing approaches for cost-benefit analysis. However, risk assessment is at a crossroads. Despite advances in the field, risk assessment faces a number of significant challenges including lengthy delays in making complex decisions; lack of data leading to significant uncertainty in risk assessments; and many chemicals in the marketplace that have not been evaluated and emerging agents requiring assessment. Science and Decisions makes practical scientific and technical recommendations to address these challenges. This book is a complement to the widely used 1983 National Academies book, Risk Assessment in the Federal Government (also known as the Red Book). The earlier book established a framework for the concepts and conduct of risk assessment that has been adopted by numerous expert committees, regulatory agencies, and public health institutions. The new book embeds these concepts within a broader framework for risk-based decision-making. Together, these are essential references for those working in the regulatory and public health fields.

Download or read book Risk Assessment of Chemicals An Introduction written by C.J. van Leeuwen and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: At last – a second edition of this hugely important text that reflects the progress and experience gained in the last decade and aims at providing background and training material for a new generation of risk assessors. The authors offer an introduction to risk assessment of chemicals as well as basic background information on sources, emissions, distribution and fate processes for the estimation of exposure of plant and animal species in the environment and humans exposed via the environment, consumer products, and at the workplace. The coverage describes the basic principles and methods of risk assessment within their legislative frameworks (EU, USA, Japan and Canada).

Download or read book Risk Management and Assessment written by Jorge Rocha and published by BoD – Books on Demand. This book was released on 2020-10-14 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk analysis, risk evaluation and risk management are the three core areas in the process known as 'Risk Assessment'. Risk assessment corresponds to the joint effort of identifying and analysing potential future events, and evaluating the acceptability of risk based on the risk analysis, while considering influencing factors. In short, risk assessment analyses what can go wrong, how likely it is to happen and, if it happens, what are the potential consequences. Since risk is a multi-disciplinary domain, this book gathers contributions covering a wide spectrum of topics with regard to their theoretical background and field of application. The work is organized in the three core areas of risk assessment.

Download or read book Risk Assessment In Chemical Process Industries written by Faisal Irshad Khan and published by Discovery Publishing House. This book was released on 1998 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Introduction, Qualitative Methods of Risk Assessment, Quantitative Methods of Risk Assessment-I: Consequence Analysis, Quantitative Methods of Risk Assessment-II: Rapid Risk Assessment, Quantitative Methods of Risk Assessment-III: Probabilistic Hazard Assessment, Studies on Chain, of Accidents (Domino Effects), Methods of Hazard Identification, Screening and Ranking, Application of Risk Analysis in Process Design.

Download or read book Fundamentals of Risk Management for Process Industry Engineers written by Maureen Hassall and published by Elsevier. This book was released on 2023-04-19 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Risk Management for Process Industry Engineers outlines foundational principles of human-centered, sociotechnical risk management, and how they can be applied to deliver real improvements in risk identification, understanding, analysis, control, communication, and governance. To maximize sustainable competitiveness requires the identification and optimization of the range of risks that can impact a business. Hence, understanding the foundational principles of sociotechnical risk management is required to design and execute effective risk identification, optimization, and management strategies. - Covers the foundations of risk management - Explains how risk management and professional engineering practice are interrelated - Describes the role and importance of humans in risk management activities - Discusses the fundamentals surrounding how to identify, assess, treat, monitor, and review risks in high hazard industries - Presents the range of operational risks faced by process companies, including safety and health, environmental and social risk, project risk, and supply chain risk