Download or read book Rheology of Fresh Cement and Concrete written by P.F.G. Banfill and published by CRC Press. This book was released on 1990-09-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together new research information on the flow behaviour of cementitious materials from the UK, France, Italy, Germany, Poland, Finland, USSR, USA and Japan, presented at the International Conference organised by the British Society of Rheology in March 1990.

Download or read book The Rheology of Fresh Concrete written by G. H. Tattersall and published by Pitman Advanced Publishing Program. This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rheology of Fresh Cement Based Materials written by Qiang Yuan and published by CRC Press. This book was released on 2022-12-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces fundamentals, measurements, and applications of rheology of fresh cement-based materials. The rheology of a fresh cement-based material is one of its most important aspects, characterizing its flow and deformation, and governing the mixing, placement, and casting quality of a concrete. This is the first book to bring the field together on an increasingly important topic, as new types of cement-based materials and new concrete technologies are developed. It describes measurement equipment, procedures, and data interpretation of the rheology of cement paste and concrete, as well as applications such as self-compacting concrete, pumping, and 3D printing. A range of other cement-based materials such as fiber-reinforced concrete, cemented paste backfills, and alkali-activated cement are also examined. Rheology of Fresh Cement-Based Materials serves as a reference book for researchers and engineers, and a textbook for advanced undergraduate and graduate students.

Download or read book Rheology and Processing of Construction Materials written by Viktor Mechtcherine and published by Springer Nature. This book was released on 2019-08-24 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed contributions presented at two parallel, closely interconnected events on advanced construction materials and processes, namely the 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2) and the 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), held in Dresden, Germany on 8-11 September 2019. The papers discuss various aspects of research on the development, testing, and applications of cement-based and other building materials together with their specific rheological properties. Furthermore, the papers cover the latest findings in the fast-growing field of self-compacting concrete, addressing topics including components’ properties and characterization; chemical admixtures, effect of binders (incl. geopolymers, calcined clay, etc.) and mixture design; laboratory and in-situ rheological testing; constitutive models and flow modelling; numerical simulations; mixing, processing and casting processes; and additive manufacturing / 3D-printing. Also presenting case studies, the book is of interest to researchers, graduate students, and industry specialists, such as material suppliers, consultants and construction experts.

Download or read book Understanding the Rheology of Concrete written by N Roussel and published by Elsevier. This book was released on 2011-12-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Estimating, modelling, controlling and monitoring the flow of concrete is a vital part of the construction process, as the properties of concrete before it has set can have a significant impact on performance. This book provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, the impact of mix design, and casting.Part one begins with two introductory chapters dealing with the rheology and rheometry of complex fluids, followed by chapters that examine specific measurement and testing techniques for concrete. The focus of part two is the impact of mix design on the rheological behaviour of concrete, looking at additives including superplasticizers and viscosity agents. Finally, chapters in part three cover topics related to casting, such as thixotropy and formwork pressure.With its distinguished editor and expert team of contributors, Understanding the rheology of concrete is an essential reference for researchers, materials specifiers, architects and designers in any section of the construction industry that makes use of concrete, and will also benefit graduate and undergraduate students of civil engineering, materials and construction. - Provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, casting and the impact of mix design - The estimating, modelling, controlling and monitoring of concrete flow is comprehensively discussed - Chapters examine specific measurement and testing techniques for concrete, the impact of mix design on the rheological behaviour of concrete, particle packaging and viscosity-enhancing admixtures

Download or read book Rheokinetics written by A. Ya. Malkin and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Application of Super Absorbent Polymers SAP in Concrete Construction written by Viktor Mechtcherine and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the state-of-the-art report prepared by the RILEM TC “Application of Super Absorbent Polymers (SAP) in concrete construction”. It gives a comprehensive overview of the properties of SAP, specific water absorption and desorption behaviour of SAP in fresh and hardening concrete, effects of the SAP addition on rheological properties of fresh concrete, changes of cement paste microstructure and mechanical properties of concrete. Furthermore, the key advantages of using SAP are described in detail: the ability of this material to act as an internal curing agent to mitigate autogenous shrinkage of high-performance concrete, the possibility to use SAP as an alternative to air-entrainment agents in order to increase the frost resistance of concrete, and finally, the benefit of steering the rheology of fresh cement-based materials. The final chapter describes the first existing and numerous prospective applications for this new concrete additive.

Download or read book Workability and Quality Control of Concrete written by G H Tattersall and published by CRC Press. This book was released on 2003-09-02 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete must be produced with the properties required for its intended applications, for example, it must be workable enough to flow into formwork, and to be compacted. This book deals with the measurement of the flow properties of fresh concrete and the factors which affect its workability. Aspects of concrete mixes and control of manufacture to produce optimum properties which relate to workability are covered.

Download or read book Measuring Rheological Properties of Cement based Materials written by Mohammed Sonebi and published by Springer Nature. This book was released on 2023-10-13 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM TC 266-MRP, whose purpose was to enhance the reliability of rheological measurements performed on cement-based materials. It makes users more aware of potential sources of errors in the measurements, and provide guidelines on how to observe, counteract or eliminate the errors. Improving the reliability of rheological measurements will further enhance the use of rheology to investigate different aspects of the fresh properties of cement-based materials. After an introduction into mix design and applications, the book delivers a comprehensive overview of rheology definitions, behavior, and parameters; rheometers; measuring and analysis procedures; difficulties and challenges during measurements; relationships with specific empirical tests; and the behavior of concrete near a surface. This report on the measurement of rheological properties of complex materials such as concrete enables readers to understand the applicable concepts of rheology, and address the challenges on the measuring procedures, the rheological models and some errors and limitations of rheometers used.

Download or read book Pozzolanic and Cementitious Materials written by V.M. Malhotra and published by CRC Press. This book was released on 2004-11-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of the mineral admixtures used in concrete, including silica fume, slag, rice-husk ash, fly ash and natural pozzolans. It also includes the mineral/chemical composition of the admixtures, their chemical reactions with cement and as a method of recycling.

Download or read book Science and Technology of Concrete Admixtures written by Pierre-Claude Aïtcin and published by Woodhead Publishing. This book was released on 2015-11-12 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Concrete Admixtures presents admixtures from both a theoretical and practical point-of-view. The authors emphasize key concepts that can be used to better understand the working mechanisms of these products by presenting a concise overview on the fundamental behavior of Portland cement and hydraulic binders as well as their chemical admixtures, also discussing recent effects in concrete in terms of rheology, mechanics, durability, and sustainability, but never forgetting the fundamental role played by the water/binder ratio and proper curing in concrete technology. Part One presents basic knowledge on Portland cement and concrete, while Part Two deals with the chemical and physical background needed to better understand what admixtures are chemically, and through which mechanism they modify the properties of the fresh and hardened concrete. Subsequent sections present discussions on admixtures technology and two particular types of concrete, self-consolidating and ultra-high strength concretes, with final remarks on their future. - Combines the knowledge of two leading authors to present both the scientific and technology of admixtures - Explains what admixtures are from a chemical point-of-view and illustrates by which mechanisms they modify the properties of fresh and hardened concrete - Presents a fundamental, practical, and innovative reference book on the topic - Contains three detailed appendices that can be used to learn how to use admixtures more efficiently

Download or read book Concrete Mixture Proportioning written by Francois de Larrard and published by CRC Press. This book was released on 1999-03-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of concrete mixes is becoming increasingly complex, with the addition of new materials in the compounds, such as organic admixtures, fibres and supplementary cementitious materials. Moreover, the list of properties which concretes are required to possess for certain applications has increased, and interest is developing in rheology, durability, deformability and whole-life behaviour. This book presents a number of simple models for the understanding of a concrete system, and provides the techniques for developing more sophisticated models for the practical design of concrete mixes.

Download or read book Cement Based Materials written by Hosam El-Din M. Saleh and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement-based materials have been used by humans nearly since the dawn of civilization. The Egyptians used lime and gypsum cement to bind their aggregate materials, mud and straw, resulting in bricks that are used for building their famous Egyptian pyramids (between 3000 and 2500 BC). Hydrated cement is a cement material bonded together with water and used for building construction; it is characterized by acceptable chemical, physical, thermal, mechanical, and structural stability. It plays a main role in the creation of vessels for storage, roads to travel on, weather-resistant structure for protection, inert hard stabilizer for hazardous wastes, and so on. Due to the composition of these materials and their advantages, it has been practiced in different applications. Cement is an essential component of making concrete, the single most prevalent building material used worldwide for construction, skyscrapers, highways, tunnels, bridges, hydraulic dams, and railway ties. Besides their numerous desired properties, there are some undesirable features. To overcome these disadvantages, several studies were established to prepare, improve, and evaluate innovative cement-based materials. Despite its oldness and deep research, every year several methods and materials evolve and so do cement technology. This book intends to provide a comprehensive overview on recent advances in the evaluation of these materials.

Download or read book Theory and Applications of Colloidal Suspension Rheology written by Norman J. Wagner and published by Cambridge University Press. This book was released on 2021-04-15 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential text on the practical application and theory of colloidal suspension rheology, written by an international coalition of experts.

Download or read book Supplementary Cementing Materials written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.

Download or read book Fresh Concrete written by P. Bartos and published by Elsevier. This book was released on 2013-10-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.

Download or read book Self compacting Concrete written by Geert De Schutter and published by . This book was released on 2008 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book to offer a systematic and comprehensive source of information on SCC technology from its inception to latest developments. It is also the first book that enables engineers and architects to readily appreciate the full capabilities and potential of SCC.