Download or read book Rheology and Processing of Liquid Crystal Polymers written by Domenico Acierno and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers (LCPs) have many strange properties that may be utilized to advantage in the processing of products made from them and their blends with isotropic polymers. This volume (volume 2 in the series Polymer Liquid Crystals) deals with their strange flow behaviour and the models put forward to explain the phenomena that occur in such polymers and their blends. It has been known for some time that small ad ditions of a thermotropic LCP to isotropic polymers not only gives an improvement in the strength and stiffness of the blend but improves the processability of the blend over that of the isotropic polymer. In the case of lyotropic LCPs, it is possible to create a molecular composite in which the reinforcement of an isotropic polymer is achieved at a molecular level by the addition of the LCP in a common solvent. If the phenomena can be fully understood both the reinforcement and an increase in the proces sability of isotropic polymers could be optimized. This book is intended to illustrate the current theories associated with the flow of LCPs and their blends in the hope that such an optimization will be achieved by future research. Chapter 1 introduces the subject of LCPs and describes the ter minology used; Chapter 2 then discusses the more complex phenomena associated with these materials. In Chapter 3, the way in which these phe nomena may be modelled using hamiltonians is fully covered.
Download or read book Polymer Rheology and Processing written by A.A. Collyer and published by Springer Science & Business Media. This book was released on 1990-10-31 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermotropic Liquid Crystal Polymer Blends written by Francesco Paolo La Mantia and published by CRC Press. This book was released on 1993-12-04 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, studies by both industry and academic researchers have opened the door to improving performance and reducing costs of these new materials. The particular structure and morphology of LCPs, as well as their peculiar rheological behavior, have stimulated researchers to develop new theoretical models and new characterization and processing techniques to more fully understand and utilize LCPs. Although the scientific literature is very rich in data on the synthetic techniques and on the relations between structure and phase behavior of these new polymers, the understanding of the rheological and processing aspects is still far from satisfactory-particularly in the case of LCP blends. In fact, although an appreciable number of patents and scientific papers have appeared describing the phase behavior, the rheology, and the mechanical properties of many of these polyblends, several aspects of the relations between processing and morphology, and between morphology and properties of these materials are still obscure or even controversial. Now, this new book, written by leading researchers, provides an up-to-date guide and reference to the processing, rheology and applications of pure LCPs and LCP blends. The book concisely reviews the synthetic procedures for the production of LCPs and discusses the rheological behavior and processing methods. Plus, the book examines present and future applications areas of LCPs and LCP blends.
Download or read book Liquid Crystal Polymers written by N.A. Platé and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing a picture of the current situation of this new field, this volume both summarizes the past achievements and analyzes the present unsolved problems.
Download or read book Rheology of Polymer Blends and Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2019-09-08 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology of Polymer Blends and Nanocomposites: Theory, Modelling and Applications focuses on rheology in polymer nanocomposites. It provides readers with a solid grounding in the fundamentals of rheology, with an emphasis on recent advancements. Chapters explore potential future applications for nanocomposites and polymer blends, giving readers a thorough understanding of the specific features derived from rheology as a tool for the study of polymer blends and nanocomposites. This book is ideal for industrial and academic researchers in the field of polymer blends and nanocomposites, but is also a great resource for anyone who wants to learn about the applications of rheology. Sets out the principles of rheology as it is applied to polymer blends and nanocomposites Demonstrates how rheological techniques are best applied to different classes of nanocomposites Assesses the opportunities and major challenges of rheological approaches to polymer blends and nanocomposites
Download or read book Rheology written by Geoffrey Mitchell and published by Nova Science Publishers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology is the study of the flow of matter, primarily in the liquid state, but also as 'soft solids' or solids under flow conditions in which they respond with plastic flow rather than deforming elastically in response to the applied force. An understanding of the flow of matter underpins a diversity of technologies and industrial processing including polymer and food processing. It applies to substances which have a complex microstructure, such as concentrated solutions, suspensions, polymers and inorganic glass formers as well as biological materials which belong to the class of soft matter. Rheological measurements are seemingly straightforward to make, but require models to interpret the mechanical measurements in terms of the microscopic behaviour of the material. This boo draws these diverse strands of current rheological research in to a single volume which embraces theory, measurement and applications in topics as diverse as theory and electrospinning, coal ash slag and food processing, hydrogels and liquid crystal polymers, reaction injection moulding and microreheology.There is a strong focus on the emerging topics in rheology and its application to complex soft matter especially in the field of food science and technology. The sixteen chapters in the volume present unpublished research work across these topics from leading authorities in the relevant field. The volume has a strong international representation with the selected authors drawn from some ten countries in Europe, South America and the rest of the world. Each chapter contains a comprehensive bibliography of related work. The book provides a fascinating snap shot across the current developments in rheology.
Download or read book Liquid Crystalline Polymers written by Vijay Kumar Thakur and published by Springer. This book was released on 2015-08-25 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces various applications of liquid crystalline polymers as the emerging new class of high performance novel materials. The authors detail the advantageous properties of these LCs including optical anisotropic, transparency and easy control over structure. This interdisciplinary work includes valuable input from international projects with special focus on the use of liquid crystalline polymers and/or nanocomposites.
Download or read book Liquid Crystalline Polymer Systems written by Avraam I. Isayev and published by . This book was released on 1996 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive report on the synthesis, structure, rheology, processing, performance, and applications of liquid-crystalline polymers (LCPs). Discusses self-reinforced composites prepared through the melt processing of thermoplastics and thermotropic LCPs. Addresses current research efforts in making polymer-dispersed liquid crystals. Reports recent studies on the structure and phase behavior of mesophases. Describes the synthesis and properties of new main-chain and side-chain liquid-crystalline block copolymers, mesogen-jacketed LCPs, and liquid-crystalline thermosets.
Download or read book Introduction to Polymer Rheology and Processing written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2018-01-18 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Polymer Rheology and Processing is a practical desk reference providing an overview of operating principles, data interpretation, and qualitative explanation of the importance and relationship of rheology to polymer processing operations. It covers full-scale processing operations, relating industrial processing operations and design methodology to laboratory-scale testing. Hundreds of design formulas applicable to scaling up the processing behavior of polymeric melts are presented. The book also provides a "working knowledge" description of major rheological test methods useful in product development and includes a useful glossary of polymer and test method/instrumentation definitions. Lavishly illustrated and featuring numerous sample calculations and modeling approaches, An Introduction to Polymer Rheology and Processing is a "must have" book for polymer engineers and rheologists.
Download or read book Thermotropic Liquid Crystal Polymers written by Tai-Shung Chung and published by CRC Press. This book was released on 2001-03-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers are sometimes called super polymers--with good reason. Their wide range of exceptional properties and ease of processing make them design candidates for many demanding applications. This new book provides a thorough review of LCP technology with the emphasis on the chemistry, synthesis and characterization of the material in its many variants. Additional chapters cover processing and applications. From the Editor's Preface The field of thermotropic liquid crystalline polymers has grown substantially in the last two decades, with fundamental research, publications, commercial products, and patents. In the 1980's, Dr. Ralph Miano led my colleagues and me at Hoechst Celanese in commercializing the first thermotropic liquid crystalline polymers, based on Dr. Gordon Calundann's composition patents. Today, more than seven companies have produced thermotropic liquid crystalline polymer materials, with at least 50 variants available. Hence, it is timely to compile a comprehensive review on the nature of this type of material and the ongoing progress in this field.... The goals of this book are to summarize previous work, provide new insights into this class of polymers, and add to the understanding of the formation of liquid crystallinity. This book covers a wide range of topics and addresses different disciplines in the field. The chapters are arranged as a learning scheme for the professional, from basic science to applied engineering. The first few chapters summarize the syntheses of various polyester, polyester-amid, and polyimide liquid crystalline polymers. The science and origins of liquid crystal formation are revealed. Next, we introduce the characterizations of these materials by their different chemical and physical aspects. Because most commercially available thermotropic liquid crystalline polymers have been used in the form of composites, we have also incorporated a chapter on polymer blends, detailing blending mechanisms and resultant properties. Two chapters on thermosetting liquid crystalline polymers integrate them with other topics, because of their unique importance and their applications for microelectronics and packaging. The final chapter deals with the engineering and processing aspects of thermoplastic liquid crystalline polymers for a variety of applications.
Download or read book High Temperature Polymer Blends written by Mark T. DeMeuse and published by Elsevier. This book was released on 2014-03-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer blends offer properties not easily obtained through the use of a single polymer, including the ability to withstand high temperatures. High Temperature Polymer Blends outlines the characteristics, developments, and use of high temperature polymer blends. The first chapter introduces high temperature polymer blends, their general principles, and thermodynamics. Further chapters go on to deal with the characterization of high temperature polymer blends for specific uses, such as fuel cells and aerospace applications. The book discusses different types of high temperature polymer blends, including liquid crystal polymers, polysulfones, and polybenzimidazole polymer blends and their commercial applications. High Temperature Polymer Blends provides a key reference for material scientists, polymer scientists, chemists, and plastic engineers, as well as academics in these fields. Reviews characterization methods and analysis of the thermodynamic properties of high temperature polymer blends Reviews the use of materials such as liquid crystals as reinforcements as well as applications in such areas as energy and aerospace engineering
Download or read book Melt Rheology and Its Role in Plastics Processing written by K. Wissbrun and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to fulfill a dual role. On the one hand it provides a description of the rheological behavior of molten poly mers. On the other, it presents the role of rheology in melt processing operations. The account of rheology emphasises the underlying principles and presents results, but not detailed deriva tions of equations. The processing operations are described qualita tively, and wherever possible the role of rheology is discussed quantitatively. Little emphasis is given to non-rheological aspects of processes, for example, the design of machinery. The audience for which the book is intended is also dual in It includes scientists and engineers whose work in the nature. plastics industry requires some knowledge of aspects of rheology. Examples are the polymer synthetic chemist who is concerned with how a change in molecular weight will affect the melt viscosity and the extrusion engineer who needs to know the effects of a change in molecular weight distribution that might result from thermal degra dation. The audience also includes post-graduate students in polymer science and engineering who wish to acquire a more extensive background in rheology and perhaps become specialists in this area. Especially for the latter audience, references are given to more detailed accounts of specialized topics, such as constitutive relations and process simulations. Thus, the book could serve as a textbook for a graduate level course in polymer rheology, and it has been used for this purpose.
Download or read book Liquid Crystal Polymers written by D. Coates and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal polymers (LCPs) have a wide range of uses, from strong engineering plastics to delicate gels for use in liquid crystal (LC) displays. For this reason, it is essential reading for materials scientists, engineers or technologists in industry, as well as research laboratories or academia. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
Download or read book Mechanical and Thermophysical Properties of Polymer Liquid Crystals written by Witold Brostow and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: may never overcome the effects of hysteresis and stress (see Chapters 6 and 12). The first sentence of the reference work, Handbook of Liquid Crystals, reads: The terms liquid crystals, crystalline liquid, mesophase, and mesomorphous state are used synonymously to describe a state of aggregation that exhibits a molecular order in a size range similar to that of a crystal but acts more or less as a viscous liquid: [2] In other words, molecules within a liquid crystalline phase possess some orientational order and lack positional order; furthermore, the shape of a liquid crystalline sample is determined by the vessel in which it is contained rather than by the orientational order of its aggregated molecules. The authors recognized the limitations and imprecision of this definition but, like others preceding them, could not devise a simple and generally applicable one that is better. Regardless, the terms 'liquid crystal' and 'mesophase' should not be used interchangeably. As mentioned above, all liquid crystals are mesophases, but all mesophases are not liquid crystals. Recent studies, employing elaborate and sophisticated analytical techniques, have permitted finer distinctions between classical crystals and mesophases. At the same time, they have made definitions like that from the Handbook of Liquid Crystals somewhat obsolete for reasons other than terminology. One part of the problem arises from the use of a combination of bulk properties (like flow) and microscopic properties (like molecular ordering) within the same definition.
Download or read book Liquid crystalline Polymers written by American Chemical Society. Meeting and published by . This book was released on 1990 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the creation, study, and processing of new liquid-crystalline polymers. It covers not only the chemistry of liquid-crystalline polymers, but also the physics and engineering aspects of these materials. A wide range of topics is covered, including syntheses of main-chain and side-chain LCPs, structural characterization of LP, rheology and processing, and applications such a electro-optics and "self-reinforcing" blends. This book presents a broad view of the direction of LCP research in both industry and academe.
Download or read book Liquid Crystal Elastomers written by Mark Warner and published by Oxford University Press. This book was released on 2007-04-05 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a primer for liquid crystals, polymers, rubber and elasticity. It is directed at physicists, chemists, material scientists, engineers and applied mathematicians at the graduate student level and beyond.
Download or read book Processing and Properties of Liquid Crystalline Polymers and LCP Based Blends written by Domenico Acierno and published by ChemTec Publishing. This book was released on 1993 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some papers in this book report on the most recent developments in pure liquid crystalline polymers showing that discipline is dynamic and may offer in the future numerous other opportunities not known today. We hope that our selections of papers will be interesting for specialists in polymer chemistry, blends, and their industrial application, and that information included in this book will be stimulating and will favorably impact research currently performed by the readers of this book.
