Download or read book RF Design and Processing of a Power Coupler for Third Harmonic Superconducting Cavities written by and published by . This book was released on 2007 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FLASH user facility providing free electron laser radiation is built based on the TTF project at DESY. Fermilab has the responsibility for the design and processing of a third harmonic, 3.9 GHz, superconducting cavity which is powered via a coaxial power coupler. Six power couplers have been manufactured at CPI after successful design of the power coupler including RF simulation, multipacting calculation, and thermal analysis. The power couplers are being tested and processed with high pulsed power in an elaborate test stand at Fermilab now. This paper presents the RF design and processing work of the power coupler.
Download or read book Coupling Interaction Between the Power Coupler and the Third Harmonic Superconducting Cavity written by and published by . This book was released on 2007 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fermilab has developed a third harmonic superconducting cavity operating at the frequency of 3.9 GHz to improve the beam performance for the FLASH user facility at DESY. It is interesting to investigate the coupling interaction between the SRF cavity and the power coupler with or without beam loading. The coupling of the power coupler to the cavity needs to be determined to minimize the power consumption and guarantee the best performance for a given beam current. In this paper, we build and analyze an equivalent circuit model containing a series of lumped elements to represent the resonant system. An analytic solution of the required power from the generator as a function of the system parameters has also been given based on a vector diagram.
Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.
Download or read book Fundamental Power Couplers for Superconducting Cavities written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental power couplers (FPC's) for superconducting cavities must meet very strict requirements to perform at high power levels (hundreds of kilowatts) and in a variety of conditions (CS, pulsed, travelling wave, standing wave) without adversely affecting the performance of the cavities they are powering. Producing good coupler designs and achieving operational performances in accelerator environments are challenging tasks that have traditionally involved large resources from many laboratories. The designs involve state-of-the-art activities in RF, cryogenic and mechanical engineering, materials science, vacuum technology, and electromagnetic field modeling. Handling, assembly and conditioning procedures have been developed to achieve ever-increasing power levels and more reliable operation. In this paper, the technical issues associated with the design, construction, assembly, processing, and operation of FPC's will be reviewed, together with the progress in FPC activities in several laboratories during the past few years.
Download or read book RF Power and HOM Coupler Tutorial written by B. Rusnak and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio frequency (RF) couplers are used on superconducting cavities to deliver RF power for creating accelerating fields and to remove unwanted higher-order mode power for reducing emittance growth and cryogenic load. RF couplers in superconducting applications present a number of interdisciplinary design challenges that need to be addressed, since poor performance in these devices can profoundly impact accelerator operations and the overall success of a major facility. This paper will focus on critical design issues for fundamental and higher order mode (HOM) power couplers, highlight a sampling of reliability-related problems observed in couplers, and discuss some design strategies for improving performance.
Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-04-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.
Download or read book Fundamental Power Coupler Development for Low beta Superconducting Cavities written by Jon Joseph Wlodarczak and published by . This book was released on 2008 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Processing of the Couplers for the SNS Superconducting Cavities written by T. Powers and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: All eighty-one fundamental power couplers for the 805 MHz superconducting cavities of the SNS linac have been RF conditioned and installed in the cryomodules successfully. The couplers were RF processed at JLAB or at the SNS in ORNL: more than forty couplers have been RF conditioned in the SNS RF Test Facility (RFTF) after the first forty couplers were conditioned at JLAB. The couplers were conditioned up to 650 kW forward power at 8% duty cycle in traveling and standing waves. They were installed on the cavities in the cryomodules and then assembled with the airside waveguide transitions. The couplers have been high power RF tested with satisfactory accelerating field gradients in the cooled cavities.
Download or read book State of the Art Couplers for Superconducting RF Cavities written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental power couplers for RF particle accelerators are the most important components that interface with the accelerating structures. In the case of superconducting cavities, the main function of providing the appropriate amount of power to the cavity's fields and to the beams is dwarfed by the requirements that the couplers must meet in order to harmoniously blend into the vacuum, cryogenic, and electromagnetic environment. Recently, a lot of progress has been made in the areas critical to the successful design, construction, and operation of fundamental power couplers. Simulations are now routinely performed that allow the prediction of electromagnetic, multipacting, thermal, and mechanical properties of couplers. From these studies, better designs have been conceived which can minimize potential problems ahead of construction. Judicious use of materials and the implementation of clean practices and of careful conditioning have gradually increased the power levels at which couplers can safely operate. Machine operation at hundreds of kilowatts has been achieved in CW at KEK and Cornell, and in a pulsed mode at the TESLA Test Facility (TTF). Test stand operations in CW at the megawatt level (Accelerator for the Production of Tritium) and in pulse mode at a peak power of 2 MW (Spallation Neutron Source, TTF version II) have been achieved. The recent progress indicates that the understanding of the behavior of fundamental power couplers is rapidly increasing and that optimal designs are being developed which will allow in the future to attain routinely megawatt power levels necessary for high beam power machines under construction and under study.
Download or read book Development of Fundamental Power Coupler for High current Superconducting RF Cavity written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Brookhaven National Laboratory took a project of developing a 704 MHz five-cell superconducting RF cavity for high-current linacs, including Energy Recovery Linac (ERL) for planned electron-hadron collider eRHIC. The cavity will be fed by a high-power RF amplifier using a coaxial Fundamental Power Coupler (FPC), which delivers 20 kW of CW RF power to the cavity. The design of FPC is one of the important aspects as one has to take into account the heat losses dissipated on the surface of the conductor by RF fields along with that of the static heat load. Using a simple simulation model we show the temperature profile and the heat load dissipated along the coupler length. To minimize the heat load on FPC near the cavity end, a thermal intercept is required at an appropriate location on FPC. A 10 K intercept was chosen and its location optimized with our simulation code. The requirement on the helium gas flow rate for the effective heat removal from the thermal intercept is also discussed.
Download or read book Comparative Simulation Studies of Multipacting in Higher Order Mode Couplers of Superconducting RF Cavities written by and published by . This book was released on 2014 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multipacting (MP) in higher-order-mode (HOM) couplers of the International Linear Collider (ILC) baseline cavity and the Continuous Electron Beam Accelerator Facility (CEBAF) 12 GeV upgrade cavity is studied by using the ACE3P suites, developed by the Advanced Computations Department at SLAC. For the ILC cavity HOM coupler, the simulation results show that resonant trajectories exist in three zones, corresponding to an accelerating gradient range of 0.6-1.6 MV/m, 21-34 MV/m, 32-35 MV/m, and> 40MV/m, respectively. For the CEBAF 12 GeV upgrade cavity HOM coupler, resonant trajectories exist in one zone, corresponding to an accelerating gradient range of 6-13 MV/m. Potential implications of these MP barriers are discussed in the context of future high energy pulsed as well as medium energy continuous wave (CW) accelerators based on superconducting radio frequency cavities. Frequency scaling of MP's predicted in HOM couplers of the ILC, CBEAF upgrade, SNS and FLASH third harmonic cavity is given and found to be in good agreement with the analytical result based on the parallel plate model.
Download or read book State of the Art Power Couplers for Superconducting RF Cavities written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulations are now routinely performed that allow the prediction of electromagnetic, multipacting, thermal, and mechanical properties of couplers. From these studies, better designs have been conceived which can minimize potential problems ahead of construction. Judicious use of materials and the implementation of clean practices and of careful conditioning have gradually increased the power levels at which couplers can safely operate. Machine operation at hundreds of kilowatts has been achieved in CW at KEK and Cornell, and in a pulsed mode at the TESLA Test Facility (TTF). Test stand operations in CW at the megawatt level (Accelerator for the Production of Tritium) and in pulse mode at a peak power of 2 MW (Spallation Neutron Source, TTF version II) have been achieved. The recent progress indicates that the understanding of the behavior of fundamental power couplers is rapidly increasing and that optimal designs are being developed which will allow in the future to attain routine attainment of the megawatt power levels necessary for high-beam-power machines under construction and under study.
Download or read book Conceptual Design of a Sapphire Loaded Coupler for Superconducting Radio frequency 1 3 GHz Cavities written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper explores a hybrid mode rf structure that served as a superconducting radio-frequency coupler. This application achieves a reflection S(1,1) varying from 0 to -30 db and delivers cw power at 7 KW. The coupler has good thermal isolation between the 2 and 300 K sections due to vacuum separation. Only one single hybrid mode can propagate through each section, and no higher order mode is coupled. The analytical and numerical analysis for this coupler is given and the design is optimized. As a result, the coupling mechanism to the cavity is also discussed.
Download or read book RF Conditioning and Testing of Fundamental Power Couplers for SNS Superconducting Cavity Production written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Spallation Neutron Source (SNS) makes use of 33 medium beta (0.61) and 48 high beta (0.81) superconducting cavities. Each cavity is equipped with a fundamental power coupler, which should withstand the full klystron power of 550 kW in full reflection for the duration of an RF pulse of 1.3 msec at 60 Hz repetition rate. Before assembly to a superconducting cavity, the vacuum components of the coupler are submitted to acceptance procedures consisting of preliminary quality assessments, cleaning and clean room assembly, vacuum leak checks and baking under vacuum, followed by conditioning and RF high power testing. Similar acceptance procedures (except clean room assembly and baking) were applied for the airside components of the coupler. All 81 fundamental power couplers for SNS superconducting cavity production have been RF power tested at JLAB Newport News and, beginning in April 2004 at SNS Oak Ridge. This paper gives details of coupler processing and RF high power-assessed performances.
Download or read book A HIGH POWER RF COUPLER DESIGN FOR MUON COOLING RF CAVITIES written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a high power RF coupler design for an interleaved [pi]/2 805 MHz standing wave accelerating structure proposed for an muon cooling experiment at FNAL. The coupler, in its simplest form, is a rectangular waveguide directly connected to an accelerating Cell through an open slot on the cavity side-wall or end-plates. Two of such couplers are needed to feed the interleaved cavities. Current high power RF test requires the coupler to be at critical coupling. Numerical simulations on the coupler designs using MAFIA will be presented.
Download or read book A Numerical Study of Superconducting Cavity Components written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer programs which solve Maxwell's equations in three dimensions are becoming an invaluable tool in the design of RF structures for particle accelerators. In particular, the lack of cylindrical symmetry of superconducting cavities with waveguide couplers demands a 3-D analysis for a reasonable description of a number of important phenomena. A set of codes, collectively known as MAFIA, developed by Weiland and his collaborators, has been used at CEBAF to study its five-cell superconducting accelerating cavities. The magnitude of RF crosstalk between cavities is found to depend critically on the breaking of cylindrical symmetry by the fundamental power couplers. A model of the higher order mode coupler exhibits an unexpected mode which is in good agreement with measurement.
Download or read book RF Couplers for High Power Superconducting Ion Linacs written by B. Rusnak and published by . This book was released on 2005 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting Radio Frequency (SRF) accelerating structures present a unique design environment for the high-power radio frequency (RF) antennas that deliver power to the cavity to establish the electromagnetic fields and ultimately accelerate beam. These RF couplers need to reliably transmit high power RF with low reflection and insertion loss, while simultaneously maintaining cavity vacuum, minimizing heat leak into the cryomodule, and not adversely affecting the RF cavity or cryomodule mechanics upon cool down. While a majority of research and development (R & D) on SRF couplers have been focused on electron accelerators, advances made in high-power ion accelerator design for the Spallation Neutron Source (SNS), the Japan Proton Accelerator Research Complex (JPARC), and the Rare Isotope Accelerator (RIA) have necessitated developing high-power RF couplers for these applications as well. This paper examines the present state of RF coupler development and R & D for superconducting ion accelerator applications.
