Download or read book RF Bulk Acoustic Wave Filters for Communications written by Ken-ya Hashimoto and published by Artech House. This book was released on 2009 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book presents a thorough overview of RF BAW filters, covering a vast range of technologies, optimal device design, filter topologies, packaging, fabrication processes, and high quality piezoelectric thin films. Moreover, the book discusses the integration of BAW filters in RF systems.

Download or read book Radio Frequency RF Bulk Acoustic Wave BAW Filters of Assessed Quality Guidelines for the Use written by British Standards Institute Staff and published by . This book was released on 1912-10-31 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoelectric devices, Dielectric devices, Piezoelectric materials, Radiofrequency measurement, Acoustic wave devices, Radiofrequencies, Electronic equipment and components, Coaxial connectors, Specification (approval), Assessed quality, Acceptance (approval), Quality assurance systems, Inspection, Detail specification, Testing conditions

Download or read book Radio Frequency RF Bulk Acoustic Wave BAW Filters of Assessed Quality Generic Specification written by British Standards Institute Staff and published by . This book was released on 1916-03-31 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiofrequencies, Electronic equipment and components, Coaxial connectors, Specification (approval), Assessed quality, Acceptance (approval), Quality assurance systems, Inspection, Detail specification, Testing conditions

Download or read book Surface Acoustic Wave Filters written by David P. Morgan and published by . This book was released on 2007 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the fundamental principles and device design techniques for surface acoustic wave filters. It covers the devices in widespread use today: bandpass and pulse compression filters, correlators and non-linear convolvers and resonators. The newest technologies for low bandpass filters are fully covered such as unidirectional transducers, resonators in impedance element filters, resonators in double-mode surface acoustic wave filters and transverse-coupled resonators using waveguides. The book covers the theory of acoustic wave physics, the piezoelectric effect, electrostatics at a surface, effective permittivity, piezoelectric SAW excitation and reception, and the SAW element factor. These are the main requirements for developing quasi-static theory, which gives a basis for the non-reflective transducers in transversal bandpass filters and interdigital pulse compression filters. It is also needed for the reflective transducers used in the newer devices. * A thorough revision of a classic on surface acoustic wave filters first published in 1985 and still in print * Uniquely combines easy -to -understand principles with practical design techniques for all the devices in widespread use today * Complete coverage of all the latest devices which are key to mobile phones, TVs and radar systems * Includes a new foreword by Sir Eric Albert Ash

Download or read book Modeling and Measurement Methods for Acoustic Waves and for Acoustic Microdevices written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2013-08-28 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is a mature field which enjoys a never ending youth. New developments are induced by either the search for a better understanding, or by technological innovations. Micro-fabrication techniques introduced a whole new class of microdevices, which exploit acoustic waves for various tasks, and in particular for information processing and for sensing purposes. Performance improvements are achievable by better modelling tools, able to deal with more complex configurations, and by more refined techniques of fabrication and of integration in technological systems, like wireless communications. Several chapters of this book deal with modelling and fabrication techniques for microdevices, including unconventional phenomena and configurations. But this is far from exhausting the research lines in acoustics. Theoretical analyses and modelling techniques are presented, for phenomena ranging from the detection of cracks to the acoustics of the oceans. Measurement methods are also discussed, which probe by acoustic waves the properties of widely different systems.

Download or read book Tuneable Film Bulk Acoustic Wave Resonators written by Spartak Gevorgian and published by Springer Science & Business Media. This book was released on 2013-02-14 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: To handle many standards and ever increasing bandwidth requirements, large number of filters and switches are used in transceivers of modern wireless communications systems. It makes the cost, performance, form factor, and power consumption of these systems, including cellular phones, critical issues. At present, the fixed frequency filter banks based on Film Bulk Acoustic Resonators (FBAR) are regarded as one of the most promising technologies to address performance -form factor-cost issues. Even though the FBARs improve the overall performances the complexity of these systems remains high. Attempts are being made to exclude some of the filters by bringing the digital signal processing (including channel selection) as close to the antennas as possible. However handling the increased interference levels is unrealistic for low-cost battery operated radios. Replacing fixed frequency filter banks by one tuneable filter is the most desired and widely considered scenario. As an example, development of the software based cognitive radios is largely hindered by the lack of adequate agile components, first of all tuneable filters. In this sense the electrically switchable and tuneable FBARs are the most promising components to address the complex cost-performance issues in agile microwave transceivers, smart wireless sensor networks etc. Tuneable Film Bulk Acoustic Wave Resonators discusses FBAR need, physics, designs, modelling, fabrication and applications. Tuning of the resonant frequency of the FBARs is considered. Switchable and tuneable FBARs based on electric field induced piezoelectric effect in paraelectric phase ferroelectrics are covered. The resonance of these resonators may be electrically switched on and off and tuned without hysteresis. The book is aimed at microwave and sensor specialists in the industry and graduate students. Readers will learn about principles of operation and possibilities of the switchable and tuneable FBARs, and will be given general guidelines for designing, fabrication and applications of these devices.

Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.

Download or read book MEMS written by Vikas Choudhary and published by CRC Press. This book was released on 2017-12-19 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microelectromechanical systems (MEMS) industry has experienced explosive growth over the last decade. Applications range from accelerometers and gyroscopes used in automotive safety to high-precision on-chip integrated oscillators for reference generation and mobile phones. MEMS: Fundamental Technology and Applications brings together groundbreaking research in MEMS technology and explores an eclectic set of novel applications enabled by the technology. The book features contributions by top experts from industry and academia from around the world. The contributors explain the theoretical background and supply practical insights on applying the technology. From the historical evolution of nano micro systems to recent trends, they delve into topics including: Thin-film integrated passives as an alternative to discrete passives The possibility of piezoelectric MEMS Solutions for MEMS gyroscopes Advanced interconnect technologies Ambient energy harvesting Bulk acoustic wave resonators Ultrasonic receiver arrays using MEMS sensors Optical MEMS-based spectrometers The integration of MEMS resonators with conventional circuitry A wearable inertial and magnetic MEMS sensor assembly to estimate rigid body movement patterns Wireless microactuators to enable implantable MEMS devices for drug delivery MEMS technologies for tactile sensing and actuation in robotics MEMS-based micro hot-plate devices Inertial measurement units with integrated wireless circuitry to enable convenient, continuous monitoring Sensors using passive acousto-electric devices in wired and wireless systems Throughout, the contributors identify challenges and pose questions that need to be resolved, paving the way for new applications. Offering a wide view of the MEMS landscape, this is an invaluable resource for anyone working to develop and commercialize MEMS applications.

Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.

Download or read book Microwave and Millimeter Wave Vacuum Electron Devices Inductive Output Tubes Klystrons Traveling Wave Tubes Magnetrons Crossed Field Amplifiers and Gyrotrons written by A.S. Gilmour, Jr. and published by Artech House. This book was released on 2020-04-30 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an internationally recognized as an expert on the subject of microwave (MW) tubes, this book presents and describes the many types of microwave tubes, and despite competition from solid-state devices (those using GaN, SiC, et cetera), which continue to be used widely and find new applications in defense, communications, medical, and industrial drying. Helix traveling wave tubes (TWTs), as well as coupled cavity TWTs are covered. Klystrons, and how they work, are described, along with the physics behind it and examples of devices and their uses. Vacuum electron devices are explained in detail and examines the harsh environment that must exist in tubes if they are to operate properly. The secondary emission process and its role in the operation of crossed-field devices is also discussed. The design of collectors for linear-beam tubes, including power dissipation and power recovery, are explored. Discussions of important noise sources and techniques that can be used to minimize their effects are also included. Presented in full color, this book contains a balance of practical and theoretical material so that those new to microwave tubes as well as experienced microwave tube technicians, engineers, and managers can benefit from its use.

Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.

Download or read book Surface Acoustic Wave Devices in Telecommunications written by Ken-Ya Hashimoto and published by Springer Science & Business Media. This book was released on 2000-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.

Download or read book Introduction to RF and Microwave Passive Components written by Richard Wallace and published by Artech House. This book was released on 2015-08-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative new resource provides an overview and introduction to working with RF, microwave, and high frequency components. From transmission lines, antennas, millimeter waves, ferrites, hybrids, power dividers and filters, this book focuses on practical, time-to-market issues to help with projects in the field. Keeping mathematics to a minimum, this comprehensive volume is packed with over 700 illustrations that help clarify key concepts. The reader will gain an in-depth understanding of the special characteristics exploited in microwave and high frequency design. The book is also used in industrial training courses.

Download or read book Substrate Integrated Suspended Line Circuits and Systems written by Kaixue Ma and published by Artech House. This book was released on 2024-03-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substrate Integrated Suspended Line Circuits and Systems provides a systematic overview of the new transmission line - the substrate-integrated suspension line (SISL). It details the fundamentals and classical application examples of the SISL. The basic SISL concept and structure, various passive circuits and active circuits, and front-end sub-systems are systematically introduced. Featuring research on topics such as high-performance RF/microwave/mm-wave circuits and system, this book is ideal for researchers, engineers, scientists, scholars, educators, and students. Since transmission line is a fundamental component of microwave and mm-wave circuits, the properties of a transmission line, such as losses, size, and dispersion, are vital to the performance of the whole system. Suspended line has been proved to be an excellent transmission line, as it has attractive features such as low loss, weak dispersion, high power capacity, and low effective dielectric constant. However, Conventional waveguide suspended line circuits require metal housing to form air cavities which is Substrate Integrated Suspended Line Circuits and Systems essential to the operation of suspended lines circuits. Also, the metal shell should provide mechanical support and shielding, which contribute to large size and heavy weight. Meanwhile, precise mechanical fabrication and assembling are strongly required, which brings difficulties to the design and fabrication of conventional suspended line circuits, and the manufacturing cost of suspended line circuits increases correspondingly. In this book, we will introduce a new platform of high-performance transmission line, i.e. substrate integrated suspended line (SISL). SISL keeps all the merits of the suspended line while overcomes the drawbacks of conventional waveguide suspended line circuits. Moreover, it is self-packaged and highly integrated. The basic SISL concept and structure, various passive circuits and active circuits, and front-end sub-systems will be systematically introduced. Featuring research on topics such as high-performance RF/microwave/mm-wave circuits and system, this book is ideally designed for researchers, engineers, scientists, scholars, educators, and students.

Download or read book High Speed Circuit Board Signal Integrity Second Edition written by Stephen C. Thierauf and published by Artech House. This book was released on 2017-04-30 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated leading-edge circuit design resource offers the knowledge needed to quickly pinpoint transmission problems that can compromise the entire circuit design. This new edition demonstrates how to apply EM theory to solve signal integrity problems with a practical application-oriented approach. Discussing both design and debug issues at gigabit per second data rates, the book serves as a practical reference for projects involving high-speed serial signaling on printed wiring boards. Step-by-step, this book goes from reviewing the essentials of linear circuit theory, to examining practical issues of pulse propagation along lossless and lossy transmission lines. It provides detailed guidelines for crosstalk, attenuation, power supply decoupling, and layer stackup tradeoffs (including pad/antipad tradeoffs). Other key topics include the construction of etched conductors, analysis of return paths and split planes, microstrip and stripline characteristics, and SMT capacitors. Filled with on-the-job-proven examples, this hands-on reference is the book that engineers can turn to time and again to design out and troubleshoot circuit signal loss and impedance problems.

Download or read book Nonlinear Design FETs and HEMTs written by Peter H. Ladbrooke and published by Artech House. This book was released on 2021-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its continuing popularity, the so-called standard circuit model of compound semiconductor field-effect transistors (FETs) and high electron mobility transistors (HEMTs) is shown to have a limitation for nonlinear analysis and design: it is valid only in the static limit. When the voltages and currents are time-varying, as they must be for these devices to have any practical use, the model progressively fails for higher specification circuits. This book shows how to reform the standard model to render it fully compliant with the way FETs and HEMTs actually function, thus rendering it valid dynamically. Proof-of-principle is demonstrated for several practical circuits, including a frequency doubler and amplifiers with demanding performance criteria. Methods for extracting both the reformulated model and the standard model are described, including a scheme for re-constructing from S-parameters the bias-dependent dynamic (or RF) I(V) characteristics along which devices work in real-world applications, and as needed for the design of nonlinear circuits using harmonic-balance and time-domain simulators. The book includes a historical review of how variations on the standard model theme evolved, leading up to one of the most widely used—the Angelov (or Chalmers) model.

Download or read book Klystrons Traveling Wave Tubes Magnetrons Crossed field Amplifiers and Gyrotrons written by A.S. Gilmour Jr. and published by Artech House. This book was released on 2011 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave tubes are vacuum electron devices used for the generation and amplification of radio frequencies in the microwave range. An established technology area, the use of tubes remains essential in the field today for high-power applications. The culmination of the authorOCOs 50 years of industry experience, this authoritative resource offers you a thorough understanding of the operations and major classes of microwave tubes.Minimizing the use of advanced mathematics, the book places emphasis on clear qualitative explanations of phenomena. This practical reference serves as an excellent introduction for newcomers to the field and offers established tube engineers a comprehensive refresher. Professionals find coverage of all major tube classifications, including klystrons, traveling wave tubes (TWTs), magnetrons, cross field amplifiers, and gyrotrons."