Download or read book RF and Microwave Module Level Design and Integration written by Mohammad J. Almalkawi and published by Materials, Circuits and Device. This book was released on 2019-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Module Level Design and Integration presents a thorough introduction to the basic elements of radio frequency (RF) and microwave modules, followed by a discussion of system-level concepts and measures that can be applied to real-world designs. With a strong emphasis on design and integration, the book offers practical solutions to today's commonly encountered challenges in RF and microwave modules, including system integration, network loss reduction techniques, electromagnetic compatibility, crosstalk reduction techniques, computer-aided design tools, system-level modeling methodologies, and system-level performance evaluation via common RF measurements. Several design examples are presented across the book chapters. This book describes techniques for the design and development of today's complex (multi-chip) radio frequency and microwave modules for an audience of engineers in academia and industry, and advanced students focusing on RF and microwave module design and integration.
Download or read book Microwave and RF Design Volume 4 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Modules focuses on the design of systems based on microwave modules. The use of modules has become increasingly important in RF and microwave engineering for rapidly realizing high performance microwave systems. When integration is ultimately to be used, building a system up using modules provides a rapid means of prototyping and testing system concepts. A wide variety of RF modules including amplifiers, local oscillators, switches, circulators, isolators, phase detectors, frequency multipliers and dividers, phase-locked loops, and direct digital synthesizers are considered. Detailed design strategies for synthesizing filters based on parallel coupled lines are presented. The reader will gain an appreciation of design by synthesis. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The fourth volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 23 worked examples * An average of 21 exercises per chapter * Answers to selected exercises * 6 case studies illustrating design procedures * Emphasis on synthesis as well as building a rich library of microwave functions * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book Fundamentals of Microwave and RF Design written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming. Key Features * A companion volume to a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 59 worked examples * An average of 24 exercises per chapter * Answers to selected exercises * Emphasis on module-level design using microstrip technologies * Extensive treatment of design using Smith charts * A parallel companion book series provides a detailed reference resource
Download or read book Microwave and RF Design written by Michael Bernard Steer and published by . This book was released on 2019 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microwave and RF Design "is derived from a multi volume book series with an emphasis in this Fundamentals book being on presenting material, the fundamentals, rquired to cross the threshold to RF and microwave design." -- Preface
Download or read book Fundamentals of RF and Microwave Transistor Amplifiers written by Inder Bahl and published by John Wiley & Sons. This book was released on 2009-06-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Up-to-Date Treatment of RF and Microwave Transistor Amplifiers This book provides state-of-the-art coverage of RF and microwave transistor amplifiers, including low-noise, narrowband, broadband, linear, high-power, high-efficiency, and high-voltage. Topics covered include modeling, analysis, design, packaging, and thermal and fabrication considerations. Through a unique integration of theory and practice, readers will learn to solve amplifier-related design problems ranging from matching networks to biasing and stability. More than 240 problems are included to help readers test their basic amplifier and circuit design skills-and more than half of the problems feature fully worked-out solutions. With an emphasis on theory, design, and everyday applications, this book is geared toward students, teachers, scientists, and practicing engineers who are interested in broadening their knowledge of RF and microwave transistor amplifier circuit design.
Download or read book Microwave and RF Design of Wireless Systems written by David M. Pozar and published by John Wiley & Sons. This book was released on 2000-11-29 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: David Pozar, author of Microwave Engineering, Second Edition, has written a new text that introduces students to the field of wireless communications. This text offers a quantitative and, design-oriented presentation of the analog RF aspects of modern wireless telecommunications and data transmission systems from the antenna to the baseband level. Other topics include noise, intermodulation, dynamic range, system aspects of antennas and filter design. This unique text takes an integrated approach to topics usually offered in a variety of separate courses on topics such as antennas and proagation, microwave systems and circuits, and communication systems. This approach allows for a complete presentation of wireless telecommunications systems designs. The author's goal with this text is for the student to be able to analyze a complete radio system from the transmitter through the receiver front-end, and quantitatively evaluate factors. Suitable for a one-semester course, at the senior or first year graduate level. Note certain sections have been denoted as advanced topics, suitable for graduate level courses.
Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.
Download or read book Introduction to Microwave Circuits written by Robert J. Weber and published by John Wiley & Sons. This book was released on 2001-01-23 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Do you want to design a wireless transmitter or receiver for hand-held telephones? Have you wondered why the printed circuit wires on high-frequency circuits don't always run in a straight line? This valuable text will answer all of your questions regarding component parasitics and circuit characterization for rf/microwave amplifier, oscillator, and filter circuit design and analysis. You will understand why capacitors act as inductors and vice versa and why amplifiers work like oscillators, while oscillators for local area networks work more like local area heaters. Application of the information in Introduction to Microwave Circuits will reduce design-cycle time and costs, markedly increasing the probability of first-time success in printed circuit or monolithic microwave integrated circuit (MMIC) design. Several approaches are taken into consideration, such as the effects of currents on the ground plane, bypass and coupling capacitors, and nonlinear effects in linear circuits. Featured topics include: * Incorporation of component parasitics in the design cycle * Closed form solution to oscillator design * Odd mode stability analysis * PIN diode analysis for high-power switching applications An integrated design example of a 1.25 GHz amplifier, oscillator, and filter printed circuit is also included, which could be useful in printed circuit board designs from tens of megahertz to tens of gigahertz. Introduction to Microwave Circuits provides the tools necessary to analyze or synthesize microwave circuits. This text is an essential reference for undergraduate students, microwave engineers, and administrators. Also, it will assist experienced designers in other fields to meet the current rapid expansion of communication system applications and work effectively in microwave circuit design. About the Author Robert J. Weber began his prolific career in the Solid State Research Laboratory at the Collins Radio Company, later a part of Rockwell International. For 25 years, he worked on advanced development and applied research in the one- to ten-gigahertz frequency range and received several distinguished awards for his valuable contributions to the field. Dr. Weber is involved in ongoing experimental research in integrating microwave circuits with other devices such as MEMS, chemical sensors, and electro-optics. Also, he teaches microwave circuit design and fiber-optics communications at the Department of Electrical and Computer Engineering, Iowa State University. Dr. Weber is an IEEE Fellow." Sponsored by: IEEE Microwave Theory and Techniques Society.
Download or read book Microwave and RF Design written by Michael Bernard Steer and published by SciTech Publishing. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Microwave & RF Design: A Systems Approach, 2nd Edition is a comprehensive treatment of the subject for advanced undergrad and graduate students (as well as professionals), focusing on the systems and emphasizing design. Components are covered in depth, but always with the idea of how they fit into modern radio, radar, and sensor systems. Advanced components and design techniques are presented along with a thoroughly modern treatment of traditional microwave theory and techniques."--pub. desc.
Download or read book RF Microwave Engineering and Applications in Energy Systems written by Abdullah Eroglu and published by John Wiley & Sons. This book was released on 2022-05-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF/MICROWAVE ENGINEERING AND APPLICATIONS IN ENERGY SYSTEMS An essential text with a unique focus on RF and microwave engineering theory and its applications In RF/Microwave Engineering and Applications in Energy Systems, accomplished researcher Abdullah Eroglu delivers a detailed treatment of key theoretical aspects of radio-frequency and microwave engineering concepts along with parallel presentations of their practical applications. The text includes coverage of recent advances in the subject, including energy harvesting methods, RFID antenna designs, HVAC system controls, and smart grids. The distinguished author provides step-by-step solutions to common engineering problems by way of numerous examples and offers end-of-chapter problems and solutions on each topic. These practical applications of theoretical subjects aid the reader with retention and recall and demonstrate a solid connection between theory and practice. The author also applies common simulation tools in several chapters, illustrating the use and implementation of time domain circuit simulators in conjunction with electromagnetic simulators, as well as Matlab for design, simulation, and implementation at the component and system levels. Readers will also benefit from: A thorough introduction to the foundations of electromagnetics, including line, surface, and volume integrals, vector operation and theorems, and Maxwell’s equations Comprehensive explorations of passive and active components in RF and microwave engineering, including resistors, capacitors, inductors, and semiconductor materials and active devices Practical discussions of transmission lines, including transmission line analysis, Smith charts, microstrip lines, and striplines In-depth examinations of network parameters, including impedance parameters, ABCD parameters, h-Hybrid parameters, and network connections Perfect for senior-level undergraduates and graduate students studying RF or Microwave engineering, RF/Microwave Engineering and Applications in Energy Systems is also an indispensable resource for professionals whose work touches on radio-frequency and microwave technologies.
Download or read book The RF and Microwave Handbook 3 Volume Set written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 2208 pages. Available in PDF, EPUB and Kindle. Book excerpt: By 1990 the wireless revolution had begun. In late 2000, Mike Golio gave the world a significant tool to use in this revolution: The RF and Microwave Handbook. Since then, wireless technology spread across the globe with unprecedented speed, fueled by 3G and 4G mobile technology and the proliferation of wireless LANs. Updated to reflect this tremendous growth, the second edition of this widely embraced, bestselling handbook divides its coverage conveniently into a set of three books, each focused on a particular aspect of the technology. Six new chapters cover WiMAX, broadband cable, bit error ratio (BER) testing, high-power PAs (power amplifiers), heterojunction bipolar transistors (HBTs), as well as an overview of microwave engineering. Over 100 contributors, with diverse backgrounds in academic, industrial, government, manufacturing, design, and research reflect the breadth and depth of the field. This eclectic mix of contributors ensures that the coverage balances fundamental technical issues with the important business and marketing constraints that define commercial RF and microwave engineering. Focused chapters filled with formulas, charts, graphs, diagrams, and tables make the information easy to locate and apply to practical cases. The new format, three tightly focused volumes, provides not only increased information but also ease of use. You can find the information you need quickly, without wading through material you don’t immediately need, giving you access to the caliber of data you have come to expect in a much more user-friendly format.
Download or read book Microwave RF Antennas and Circuits written by Ofer Aluf and published by Springer. This book was released on 2016-12-01 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a new concept for analyzing RF/microwave circuits, which includes RF/microwave antennas. The book is unique in its emphasis on practical and innovative microwave RF engineering applications. The analysis is based on nonlinear dynamics and chaos models and shows comprehensive benefits and results. All conceptual RF microwave circuits and antennas are innovative and can be broadly implemented in engineering applications. Given the dynamics of RF microwave circuits and antennas, they are suitable for use in a broad range of applications. The book presents analytical methods for microwave RF antennas and circuit analysis, concrete examples, and geometric examples. The analysis is developed systematically, starting with basic differential equations and their bifurcations, and subsequently moving on to fixed point analysis, limit cycles and their bifurcations. Engineering applications include microwave RF circuits and antennas in a variety of topological structures, RFID ICs and antennas, microstrips, circulators, cylindrical RF network antennas, Tunnel Diodes (TDs), bipolar transistors, field effect transistors (FETs), IMPATT amplifiers, Small Signal (SS) amplifiers, Bias-T circuits, PIN diode circuits, power amplifiers, oscillators, resonators, filters, N-turn antennas, dual spiral coil antennas, helix antennas, linear dipole and slot arrays, and hybrid translinear circuits. In each chapter, the concept is developed from the basic assumptions up to the final engineering outcomes. The scientific background is explained at basic and advanced levels and closely integrated with mathematical theory. The book also includes a wealth of examples, making it ideal for intermediate graduate level studies. It is aimed at electrical and electronic engineers, RF and microwave engineers, students and researchers in physics, and will also greatly benefit all engineers who have had no formal instruction in nonlinear dynamics, but who now desire to bridge the gap between innovative microwave RF circuits and antennas and advanced mathematical analysis methods.
Download or read book Radar RF Circuit Design Second Edition written by Nickolas Kingsley and published by Artech House. This book was released on 2022-02-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a previous bestseller gives you practical techniques for optimizing RF and microwave circuits for applications in radar systems design, with an emphasis on current and emerging technologies. Completely updated with new material, the book shows you how to design RF components for radar systems and how to choose appropriate materials and packaging methods. It takes you through classic techniques, to the state of the art, and finally to emerging technologies. You will learn: How to design high-frequency circuits for use in radar applications How to integrate components while avoiding higher-level assembly issues and troubleshooting problems on the measurement bench How to properly simulate, build, assemble, and test high-frequency circuits How to debug issues with hardware on the bench How to connect microwave theory to practical circuit design Theory and practical information are provided while addressing topics ranging from heat removal to digital circuit integration. The book serves as a teaching aid for classic techniques that are still relevant today. It also demonstrates how these techniques are serving as the foundation for technologies to come. You will be equipped to consider future needs and emerging enabling technologies and confidently think (and design) outside the box to ensure future needs are met. The book also shows you how to incorporate modern design techniques often overlooked or underused, and will help you to better understand the capabilities and limitations of today’s technology and the emerging technologies that are on the horizon to mitigate those limitations. This is a must-have resource for system-level radar designers who want to up their game in RF/microwave component design. It is also a great tool for RF/microwave engineers tasked or interested in designing components for radar systems. Students and new designers of radar components will also benefit and be well prepared to start designing immediately.
Download or read book Microwave and RF Design written by Michael Bernard Steer and published by . This book was released on 2019 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microwave and RF Design "is derived from a multi volume book series with an emphasis in this Fundamentals book being on presenting material, the fundamentals, rquired to cross the threshold to RF and microwave design." -- Preface
Download or read book Microwave and RF Design written by Michael Steer and published by Scitech. This book was released on 2008-10-01 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive introduction to RF and microwave design. For those not specialising in RF and microwave design, the book provides a comprehensive knowledge that can be used in system studies and in working with RF hardware engineers.
Download or read book Microwave and RF Design Volume 1 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Radio Systems is a circuits- and systems-oriented approach to modern microwave and RF systems. Sufficient details at the circuits and sub-system levels are provided to understand how modern radios are implemented. Design is emphasized throughout. The evolution of radio from what is now known as 0G, for early radio, through to 6G, for sixth generation cellular radio, is used to present modern microwave and RF engineering concepts. Two key themes unify the text: 1) how system-level decisions affect component, circuit and subsystem design; and 2) how the capabilities of technologies, components, and subsystems impact system design. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The first volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 31 worked examples * An average of 38 exercises per chapter * Answers to selected exercises * Coverage of cellular radio from 1G through 6G * Case study of a software defined radio illustrating how modern radios partition functionality between analog and digital domains * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book Passive RF and Microwave Integrated Circuits written by Leo Maloratsky and published by Elsevier. This book was released on 2003-12-01 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth in RF and wireless/mobile computing devices that operate at microwave frequencies has resulted in explosive demand for integrated circuits capable of operating at such frequencies in order to accomplish functions like frequency division, phase shifting, attenuation, and isolators and circulators for antennas. This book is an introduction to such ICs, combining theory and practical applications of those devices. In addition to this combined theory and application approach, the author discusses the critical importance of differing fabrication materials on the performance of ICs at different frequencies. This is an area often overlooked when choosing ICs for RF and microwave applications, yet it can be a crucial factor in how an IC performs in a given application. Gives reader a solid background in an increasingly important area of circuit design Emphasis on combination of theoretical discussions with practical application examples In-depth discussion of critical, but often overlooked topic of different fabrication material performances at varying frequencies