Download or read book Reynolds stress and Dissipation Rate Budgets in a Turbulent Channel Flow written by and published by . This book was released on 1987 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Flows written by Jean Piquet and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: obtained are still severely limited to low Reynolds numbers (about only one decade better than direct numerical simulations), and the interpretation of such calculations for complex, curved geometries is still unclear. It is evident that a lot of work (and a very significant increase in available computing power) is required before such methods can be adopted in daily's engineering practice. I hope to l"Cport on all these topics in a near future. The book is divided into six chapters, each· chapter in subchapters, sections and subsections. The first part is introduced by Chapter 1 which summarizes the equations of fluid mechanies, it is developed in C~apters 2 to 4 devoted to the construction of turbulence models. What has been called "engineering methods" is considered in Chapter 2 where the Reynolds averaged equations al"C established and the closure problem studied (§1-3). A first detailed study of homogeneous turbulent flows follows (§4). It includes a review of available experimental data and their modeling. The eddy viscosity concept is analyzed in §5 with the l"Csulting ~alar-transport equation models such as the famous K-e model. Reynolds stl"Css models (Chapter 4) require a preliminary consideration of two-point turbulence concepts which are developed in Chapter 3 devoted to homogeneous turbulence. We review the two-point moments of velocity fields and their spectral transforms (§ 1), their general dynamics (§2) with the particular case of homogeneous, isotropie turbulence (§3) whel"C the so-called Kolmogorov's assumptions are discussed at length.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Structure of Turbulent Shear Flow written by A. A. R. Townsend and published by Cambridge University Press. This book was released on 1976 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Fluid Flow written by Peter S. Bernard and published by John Wiley & Sons. This book was released on 2019-03-11 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the essential information needed to model and compute turbulent flows and interpret experiments and numerical simulations Turbulent Fluid Flow offers an authoritative resource to the theories and models encountered in the field of turbulent flow. In this book, the author – a noted expert on the subject – creates a complete picture of the essential information needed for engineers and scientists to carry out turbulent flow studies. This important guide puts the focus on the essential aspects of the subject – including modeling, simulation and the interpretation of experimental data - that fit into the basic needs of engineers that work with turbulent flows in technological design and innovation. Turbulent Fluid Flow offers the basic information that underpins the most recent models and techniques that are currently used to solve turbulent flow challenges. The book provides careful explanations, many supporting figures and detailed mathematical calculations that enable the reader to derive a clear understanding of turbulent fluid flow. This vital resource: Offers a clear explanation to the models and techniques currently used to solve turbulent flow problems Provides an up-to-date account of recent experimental and numerical studies probing the physics of canonical turbulent flows Gives a self-contained treatment of the essential topics in the field of turbulence Puts the focus on the connection between the subject matter and the goals of fluids engineering Comes with a detailed syllabus and a solutions manual containing MATLAB codes, available on a password-protected companion website Written for fluids engineers, physicists, applied mathematicians and graduate students in mechanical, aerospace and civil engineering, Turbulent Fluid Flow contains an authoritative resource to the information needed to interpret experiments and carry out turbulent flow studies.
Download or read book Direct and Large Eddy Simulation V written by Rainer Friedrich and published by Springer Science & Business Media. This book was released on 2004-04-30 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth ERCOFfAC workshop 'Direct and Large-Eddy Simulation-5' (DLES-5) was held at the Munich University of Technology, August 27-29, 2003. It is part of a series of workshops that originated at the University of Surrey in 1994 with the intention to provide a forum for presentation and dis cussion of recent developments in the field of direct and large-eddy simula tion. Over the years the DLES-series has grown into a major international venue focussed on all aspects of DNS and LES, but also on hybrid methods like RANSILES coupling and detached-eddy simulation designed to provide reliable answers to technical flow problems at reasonable computational cost. DLES-5 was attended by 111 delegates from 15 countries. Its three-day pro gramme covered ten invited lectures and 63 original contributions partially pre sented in parallel sessions. The workshop was financially supported by the fol lowing companies, institutions and organizations: ANSYS Germany GmbH, AUDI AG, BMW Group, ERCOFfAC, FORTVER (Bavarian Research Asso ciation on Combustion), JM BURGERS CENTRE for Fluid Dynamics. Their help is gratefully acknowledged. The present Proceedings contain the written versions of nine invited lectures and fifty-nine selected and reviewed contributions which are organized in four parts: 1 Issues in LES modelling and numerics 2 Laminar-turbulent transition 3 Turbulent flows involving complex physical phenomena 4 Turbulent flows in complex geometries and in technical applications.
Download or read book The Global Geometry of Turbulence written by Javier Jiménez and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Advanced Research Workshop was to bring together Physicists, Applied Mathematicians and Fluid Dynamicists, including very specially experimentalists, to review the available knowledge on the global structural aspects of turbulent flows, with an especial emphasis on open systems, and to try to reach a consensus on their possible relationship to recent advances in the understanding of the behaviour of low dimensional dynamical systems and amplitude equations. A lot has been learned during recent years on the non-equilibrium behaviour of low dimen sional dynamical systems, including some fluid flows (Rayleigh-Benard, Taylor-Couette, etc. ). These are mostly closed flows and many of the global structural features of the low dimensional systems have been observed in them, including chaotic behaviour, period doubling, intermit tency, etc. . It has also been shown that some of these flows are intrinsically low dimensional, which accounts for much of the observed similarities. Open flows seem to be different, and experimental observations point to an intrinsic high dimensionality. However, some of the tran sitional features of the low dimensional systems have been observed in them, specially in the intermittent behaviour of subcritical flows (pipes, channels, boundary layers with suction, etc. ), and in the large scale geometry of coherent structures of free shear flows (mixing layers, jets and wakes).
Download or read book High Performance Computing in Science and Engineering Garching 2004 written by Arndt Bode and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of High Performance Computing in Science and Engineering is fully dedicated to the final report of KONWIHR, the Bavarian Competence Network for Technical and Scientific High Performance Computing. It includes the transactions of the final KONWIHR workshop, that was held at Technische Universität München, October 14-15, 2004, as well as additional reports of KONWIHR research groups. KONWIHR was established by the Bavarian State Government in order to support the broad application of high performance computing in science and technology throughout the country. KONWIHR is a supporting action to the installation of the German supercomputer Hitachi SR 8000 in the Leibniz Computing Center of the Bavarian Academy of Sciences. The report covers projects from basic research in computer science to develop tools for high performance computing as well as applications from biology, chemistry, electrical engineering, geology, mathematics, physics, computational fluid dynamics, materials science and computer science.
Download or read book Numerical Simulation of Unsteady Flows and Transition to Turbulence written by O. Pironneau and published by Cambridge University Press. This book was released on 1992-07-31 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop concentrated on the following turbulence test cases: T1 Boundary layer in an S-shaped duct; T2 Periodic array of cylinders in a channel; T3 Transition in a boundary layer under the influence of free-stream turbulence; T4 & T5: Axisymmetric confined jet flows.
Download or read book Fundamentals Of Turbulence Modelling written by Ching Jen Chen and published by CRC Press. This book was released on 1997-12-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the second-order turbulence-closure model and its applications to engineering problems. Topics include turbulent motion and the averaging process, near-wall turbulence, applications of turbulence models, and turbulent buoyant flows.
Download or read book Computational Wind Engineering 1 written by S. Murakami and published by Elsevier. This book was released on 2014-06-28 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this volume is to explore the challenges posed by the rapid development of Computational Fluid Dynamics (CFD) within the field of engineering. CFD is already essential to research concerned with fluid flow in civil engineering, and its further potential for application in wind engineering is highly promising. State-of-the-art papers from all over the world are contained here, illuminating the present parameters of the field, as well as suggesting fruitful areas for further research. Eleven papers have been contributed by invited speakers outstanding in the fields of CFD and wind engineering. This volume will serve as a vehicle to promote further development in computational wind engineering.
Download or read book Turbulent Fluid Motion written by R. Deissler and published by CRC Press. This book was released on 2020-09-29 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book is based on the Navier-Stokes and other continuum equations for fluids. It interprets the analytical and numerical solutions of the equations of fluid motion. Topics included are turbulence, and how, why, and where it occurs; mathematical apparatus used for the representation and study of turbulence; continuum equations used for the analysis of turbulence; ensemble, time, and space averages as they are applied to turbulent quantities; the closure problem of the averaged equations and possible closure schemes; Fourier analysis and the spectral form of the continuum equations, both averaged and unaveraged; nonlinear dynamics and chaos theory.
Download or read book An Introduction To Turbulence written by Paul A. Libby and published by CRC Press. This book was released on 1996-10-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with a description of turbulence, its various manifestations, and a brief history of study, this text also incorporates modern perspectives on turbulence. The text also covers such topics as intermittency and the resultant conditional sampling and averaging of turbulent flows, the role of large scale computation of the fundamental equations of fluid mechanics in providing information on variables, and asymptotic methods which are used to expose important features of turbulent flows. Meaningful exercises are included in every section.
Download or read book Transition Turbulence and Noise written by Reda R. Mankbadi and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence takes place in most flow situations whethertheyoccur naturally or in technological systems. Therefore, considerable effort is being expended in an attempt to understand the phenomenon of turbulence. The recent discovery ofcoherent structure in turbulent shear flows and the modem developments in computer capabilities have revolutionized research work in turbulence. There is a strong evidence that the coherent structure in turbulent shear flows is reminiscent of nonlinear stability waves. As such, the interest in nonlinear stability waves has increased not only for the understandingofthe latterstages of the laminar-turbulent transition process, but also for understanding the coherent structures in turbulent flows. Also. the advances in computers have made direct numerical simulation possible at Low-Reynolds numbers and large-eddy simulation possible at high Reynolds numbers. This made first-principles prediction of turbulence-generated noise feasible. Therefore, this book aims at presenting a graduate-level introductory study of turbulence while accounting for such recent views of concern to researchers. This book is an outgrowth oflecture notes on the subject offered to graduate students in engineering. The book should be of interest to research engineers and graduatestudents in science and engineering. The theoretical basis presented is sufficient not only for studying the specialized literature on turbulence but also for theoretical investigations on the subject.
Download or read book Wall Turbulence Control written by Sedat Tardu and published by John Wiley & Sons. This book was released on 2017-02-07 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wall turbulence control is a major subject, the investigation of which involves significant industrial, environmental and fundamental consequences. Wall Turbulence Control addresses recent advances achieved in active and passive wall turbulence control over the past two decades. This valuable reference for scientists, researchers and engineers provides an updated view of the research into this topic, including passive control, optimal and suboptimal control methodology, linear control and control using adaptive methods (neural networks), polymer and bubble injection, electromagnetic control and recent advances in control by plasma.
Download or read book A First Course in Turbulence written by Henk Tennekes and published by MIT Press. This book was released on 2018-04-27 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book specifically designed to offer the student a smooth transitionary course between elementary fluid dynamics (which gives only last-minute attention to turbulence) and the professional literature on turbulent flow, where an advanced viewpoint is assumed. The subject of turbulence, the most forbidding in fluid dynamics, has usually proved treacherous to the beginner, caught in the whirls and eddies of its nonlinearities and statistical imponderables. This is the first book specifically designed to offer the student a smooth transitionary course between elementary fluid dynamics (which gives only last-minute attention to turbulence) and the professional literature on turbulent flow, where an advanced viewpoint is assumed. Moreover, the text has been developed for students, engineers, and scientists with different technical backgrounds and interests. Almost all flows, natural and man-made, are turbulent. Thus the subject is the concern of geophysical and environmental scientists (in dealing with atmospheric jet streams, ocean currents, and the flow of rivers, for example), of astrophysicists (in studying the photospheres of the sun and stars or mapping gaseous nebulae), and of engineers (in calculating pipe flows, jets, or wakes). Many such examples are discussed in the book. The approach taken avoids the difficulties of advanced mathematical development on the one side and the morass of experimental detail and empirical data on the other. As a result of following its midstream course, the text gives the student a physical understanding of the subject and deepens his intuitive insight into those problems that cannot now be rigorously solved. In particular, dimensional analysis is used extensively in dealing with those problems whose exact solution is mathematically elusive. Dimensional reasoning, scale arguments, and similarity rules are introduced at the beginning and are applied throughout. A discussion of Reynolds stress and the kinetic theory of gases provides the contrast needed to put mixing-length theory into proper perspective: the authors present a thorough comparison between the mixing-length models and dimensional analysis of shear flows. This is followed by an extensive treatment of vorticity dynamics, including vortex stretching and vorticity budgets. Two chapters are devoted to boundary-free shear flows and well-bounded turbulent shear flows. The examples presented include wakes, jets, shear layers, thermal plumes, atmospheric boundary layers, pipe and channel flow, and boundary layers in pressure gradients. The spatial structure of turbulent flow has been the subject of analysis in the book up to this point, at which a compact but thorough introduction to statistical methods is given. This prepares the reader to understand the stochastic and spectral structure of turbulence. The remainder of the book consists of applications of the statistical approach to the study of turbulent transport (including diffusion and mixing) and turbulent spectra.
