Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Traffic Incident Management Systems written by Federal Emergency Management Agency and published by FEMA. This book was released on 2012-03 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: With full color photographs and other illustrations.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Electric Vehicle Battery Systems written by Sandeep Dhameja and published by Elsevier. This book was released on 2001-10-30 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Vehicle Battery Systems provides operational theory and design guidance for engineers and technicians working to design and develop efficient electric vehicle (EV) power sources. As Zero Emission Vehicles become a requirement in more areas of the world, the technology required to design and maintain their complex battery systems is needed not only by the vehicle designers, but by those who will provide recharging and maintenance services, as well as utility infrastructure providers. Includes fuel cell and hybrid vehicle applications.Written with cost and efficiency foremost in mind, Electric Vehicle Battery Systems offers essential details on failure mode analysis of VRLA, NiMH battery systems, the fast-charging of electric vehicle battery systems based on Pb-acid, NiMH, Li-ion technologies, and much more. Key coverage includes issues that can affect electric vehicle performance, such as total battery capacity, battery charging and discharging, and battery temperature constraints. The author also explores electric vehicle performance, battery testing (15 core performance tests provided), lithium-ion batteries, fuel cells and hybrid vehicles. In order to make a practical electric vehicle, a thorough understanding of the operation of a set of batteries in a pack is necessary. Expertly written and researched, Electric Vehicle Battery Systems will prove invaluable to automotive engineers, electronics and integrated circuit design engineers, and anyone whose interests involve electric vehicles and battery systems.* Addresses cost and efficiency as key elements in the design process* Provides comprehensive coverage of the theory, operation, and configuration of complex battery systems, including Pb-acid, NiMH, and Li-ion technologies* Provides comprehensive coverage of the theory, operation, and configuration of complex battery systems, including Pb-acid, NiMH, and Li-ion technologies
Download or read book Data on the Web written by Serge Abiteboul and published by Morgan Kaufmann. This book was released on 2000 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data model. Queries. Types. Sysems. A syntax for data. XML.. Query languages. Query languages for XML. Interpretation and advanced features. Typing semistructured data. Query processing. The lore system. Strudel. Database products supporting XML. Bibliography. Index. About the authors.
Download or read book Annual Energy Outlook 2016 With Projections to 2040 written by Energy Dept., Energy Information Administration and published by Government Printing Office. This book was released on 2017-02-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Annual Energy Outlook 2016 presents long-term projections of energy supply, demand, and prices through 2040. The projections, focused on U.S. energy markets, are based on results from EIA's National Energy Modeling System which enables EIA to make projections under alternative, internally consistent sets of assumptions.
Download or read book On the Road in 2035 written by Anup Bandivadekar and published by MIT Press (MA). This book was released on 2008 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ethics Technology and Engineering written by Ibo van de Poel and published by John Wiley & Sons. This book was released on 2011-03-23 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring a wide range of international case studies, Ethics, Technology, and Engineering presents a unique and systematic approach for engineering students to deal with the ethical issues that are increasingly inherent in engineering practice. Utilizes a systematic approach to ethical case analysis -- the ethical cycle -- which features a wide range of real-life international case studies including the Challenger Space Shuttle, the Herald of Free Enterprise and biofuels. Covers a broad range of topics, including ethics in design, risks, responsibility, sustainability, and emerging technologies Can be used in conjunction with the online ethics tool Agora (http://www.ethicsandtechnology.com) Provides engineering students with a clear introduction to the main ethical theories Includes an extensive glossary with key terms
Download or read book State Traffic Safety Information written by and published by . This book was released on 1997 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Trends in Photonics Signal Processing and Communication Engineering written by Govind R. Kadambi and published by Springer Nature. This book was released on 2020-04-20 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volumes presents select papers presented during the International Conference on Photonics, Communication and Signal Processing Technologies held in Bangalore from July 18th to 20th, 2018. The research papers highlight analytical formulation, solution, simulation, algorithm development, experimental research, and experimental investigations in the broad domains of photonics, signal processing and communication technologies. This volume will be of interest to researchers working in the field.
Download or read book Traffic Incident Management Handbook written by and published by . This book was released on 2000 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to assist agencies responsible for incident management activities on public roadways to improve their programs and operations.Organized into three major sections: Introduction to incident management; organizing, planning, designing and implementing an incident management program; operational and technical approaches to improving the incident management process.
Download or read book Automation and Collaborative Robotics written by Peter Matthews and published by Apress. This book was released on 2020-06-30 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the current and future research into technologies that underpin the increasing capabilities of automation technologies and their impact on the working world of the future. Rapid advances in automation and robotics technologies are often reported in the trade and general media, often relying on scary headlines such as “Jobs Lost to Robots.” It is certainly true that work will change with the advent of smarter and faster automated workers; however, the scope and scale of the changes is still unknown. Automation may seem to be here already, but we are only at the early stages. Automation and Collaborative Robotics explores the output of current research projects that are improving the building blocks of an automated world. Research into collaborative robotics (cobotics) is merging digital, audio, and visual data to generate a commonly held view between cobots and their human collaborators. Low-power machine learning at the edge of the network can deliver decision making on cobots or to their manipulations. Topics covered in this book include: Robotic process automation, chatbots, and their impact in the near future The hype of automation and headlines leading to concerns over the future of work Component technologies that are still in the research labs Foundational technologies and collaboration that will enable many tasks to be automated with human workers being re-skilled and displaced rather than replaced What You Will Learn Be aware of the technologies currently being researched to improve or deliver automation Understand the impact of robotics, other automation technologies, and the impact of AI on automation Get an idea of how far we are from implementation of an automated future Know what work will look like in the future with the deployment of these technologies Who This Book Is For Technical and business managers interested in the future of automation and robotics, and the impact it will have on their organizations, customers, and the business world in general
Download or read book The National Highway Traffic Safety Administration s Rating System for Rollover Resistance written by National Research Council (U.S.). Committee for the Study of a Motor Vehicle Rollover Rating System and published by Transportation Research Board. This book was released on 2002 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains that the static stability factor is an indicator of a vehicle's propensity to roll over, and that US government ratings for vehicles do not reflect differences in rollover resistance. This report states that the 5-star system should allow discrimination among vehicles and incorporate results from road tests that measure vehicle control.
Download or read book Engineering Philosophy written by Louis L. Bucciarelli and published by Delft University Press. This book was released on 2003 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and Philosophy seem two worlds apart. But things and ideas are not disjunct in this world, and their synthesis is certainly essential in engineering design. In this book, the author explores how the concerns of philosophers are relevant to engineering thought and practice -in negotiating tradeoffs, in diagnosing failure, in constructing adequate models and simulations, and in teaching. This book is based on a number of lectures given at the Technical University of Delft, where the author was a Visiting Professor hosted by the Philosophy section and the School of Industrial Engineering Design. Louis Bucciarelli is a Professor of Engineering and Technology Studies at MIT. He is the author of numerous publications including the book Designing Engineers. Contents include: Designing, like language, is a social process, What engineers don't know & why they believe it, Knowing that and how, Learning engineering, Extrapolation, Index.
Download or read book Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium and Heavy duty Engines and Vehicles written by and published by . This book was released on 2012 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Revision of NHTSA Curriculum Packages Final Report written by Arlene M. Cleven and published by . This book was released on 1978 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Congressional Record written by United States. Congress and published by . This book was released on 1980 with total page 1510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Congressional Record is the official record of the proceedings and debates of the United States Congress. It is published daily when Congress is in session. The Congressional Record began publication in 1873. Debates for sessions prior to 1873 are recorded in The Debates and Proceedings in the Congress of the United States (1789-1824), the Register of Debates in Congress (1824-1837), and the Congressional Globe (1833-1873)
