Download or read book Review of Watershed Water Quality Models written by Patrick N. Deliman and published by . This book was released on 1999 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Quality Modelling for Rivers and Streams written by Marcello Benedini and published by Springer Science & Business Media. This book was released on 2013-02-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the Water Framework Directive in the European countries is to achieve a “good status” of all the water bodies, in the integrated management of river basins. In order to assess the impact of improvement measures, water quality models are necessary. During the previous decades the progress in computer technology and computational methods has supported the development of advanced mathematical models for pollutant transport in rivers and streams. This book is intended to provide the fundamental knowledge needed for a deeper understanding of these models and the development of new ones, which will fulfil future quality requirements in water resources management. This book focuses on the fundamentals of computational techniques required in water quality modelling. Advection, dispersion and concentrated sources or sinks of contaminants lead to the formulation of the fundamental differential equation of pollutant transport. Its integration, according to appropriate initial and boundary conditions and with the knowledge of the velocity field, allows for pollutant behaviour to be assessed in the entire water body. An analytical integration is convenient only in one-dimensional approach with considerable simplification. Integration in the numerical field is useful for taking into account particular aspects of water body and pollutants. To ensure their reliability, the models require accurate calibration and validation, based on proper data, taken from direct measurements. In addition, sensitivity and uncertainty analysis are also of utmost importance. All the above items are discussed in detail in the 21 chapters of the book, which is written in a didactic form for professionals and students.
Download or read book Water Resource Systems Planning and Management written by Daniel P. Loucks and published by Springer. This book was released on 2017-03-02 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY-NC 4.0 license. This revised, updated textbook presents a systems approach to the planning, management, and operation of water resources infrastructure in the environment. Previously published in 2005 by UNESCO and Deltares (Delft Hydraulics at the time), this new edition, written again with contributions from Jery R. Stedinger, Jozef P. M. Dijkman, and Monique T. Villars, is aimed equally at students and professionals. It introduces readers to the concept of viewing issues involving water resources as a system of multiple interacting components and scales. It offers guidelines for initiating and carrying out water resource system planning and management projects. It introduces alternative optimization, simulation, and statistical methods useful for project identification, design, siting, operation and evaluation and for studying post-planning issues. The authors cover both basin-wide and urban water issues and present ways of identifying and evaluating alternatives for addressing multiple-purpose and multi-objective water quantity and quality management challenges. Reinforced with cases studies, exercises, and media supplements throughout, the text is ideal for upper-level undergraduate and graduate courses in water resource planning and management as well as for practicing planners and engineers in the field.
Download or read book Hydrodynamics and Water Quality written by Zhen-Gang Ji and published by John Wiley & Sons. This book was released on 2017-07-05 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary reference for the modeling of hydrodynamics and water quality in rivers, lake, estuaries, coastal waters, and wetlands This comprehensive text perfectly illustrates the principles, basic processes, mathematical descriptions, case studies, and practical applications associated with surface waters. It focuses on solving practical problems in rivers, lakes, estuaries, coastal waters, and wetlands. Most of the theories and technical approaches presented within have been implemented in mathematical models and applied to solve practical problems. Throughout the book, case studies are presented to demonstrate how the basic theories and technical approaches are implemented into models, and how these models are applied to solve practical environmental/water resources problems. This new edition of Hydrodynamics and Water Quality: Modeling Rivers, Lakes, and Estuaries has been updated with more than 40% new information. It features several new chapters, including one devoted to shallow water processes in wetlands as well as another focused on extreme value theory and environmental risk analysis. It is also supplemented with a new website that provides files needed for sample applications, such as source codes, executable codes, input files, output files, model manuals, reports, technical notes, and utility programs. This new edition of the book: Includes more than 120 new/updated figures and 450 references Covers state-of-the-art hydrodynamics, sediment transport, toxics fate and transport, and water quality in surface waters Provides essential and updated information on mathematical models Focuses on how to solve practical problems in surface waters—presenting basic theories and technical approaches so that mathematical models can be understood and applied to simulate processes in surface waters Hailed as “a great addition to any university library” by the Journal of the American Water Resources Association (July 2009), Hydrodynamics and Water Quality, Second Edition is an essential reference for practicing engineers, scientists, and water resource managers worldwide.
Download or read book Stormwater Watershed and Receiving Water Quality Modeling written by Water Environment Federation and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication fills a need for a comprehensive and up-to-date stormwater quality and modeling manual for the industry. It focuses on water quality models-models that predict volumes and loads from the land surface, both urban and rural, and then route the volume and pollutant loading through the receiving waters.
Download or read book Watershed Management for Potable Water Supply written by National Research Council and published by National Academies Press. This book was released on 2000-02-17 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1997, New York City adopted a mammoth watershed agreement to protect its drinking water and avoid filtration of its large upstate surface water supply. Shortly thereafter, the NRC began an analysis of the agreement's scientific validity. The resulting book finds New York City's watershed agreement to be a good template for proactive watershed management that, if properly implemented, will maintain high water quality. However, it cautions that the agreement is not a guarantee of permanent filtration avoidance because of changing regulations, uncertainties regarding pollution sources, advances in treatment technologies, and natural variations in watershed conditions. The book recommends that New York City place its highest priority on pathogenic microorganisms in the watershed and direct its resources toward improving methods for detecting pathogens, understanding pathogen transport and fate, and demonstrating that best management practices will remove pathogens. Other recommendations, which are broadly applicable to surface water supplies across the country, target buffer zones, stormwater management, water quality monitoring, and effluent trading.
Download or read book Watershed Models written by Vijay P. Singh and published by CRC Press. This book was released on 2010-09-28 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Watershed modeling is at the heart of modern hydrology, supplying rich information that is vital to addressing resource planning, environmental, and social problems. Even in light of this important role, many books relegate the subject to a single chapter while books devoted to modeling focus only on a specific area of application. Recognizing the
Download or read book Surface Water Quality Modeling written by Steven C. Chapra and published by Waveland Press. This book was released on 2008-12-17 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: National and international interest in finding rational and economical approaches to water-quality management is at an all-time high. Insightful application of mathematical models, attention to their underlying assumptions, and practical sampling and statistical tools are essential to maximize a successful approach to water-quality modeling. Chapra has organized this user-friendly text in a lecture format to engage students who want to assimilate information in manageable units. Comical examples and literary quotes interspersed throughout the text motivate readers to view the material in the proper context. Coverage includes the necessary issues of surface water modeling, such as reaction kinetics, mixed versus nonmixed systems, and a variety of possible contaminants and indicators; environments commonly encountered in water-quality modeling; model calibration, verification, and sensitivity analysis; and major water-quality-modeling problems. Most formulations and techniques are accompanied by an explanation of their origin and/or theoretical basis. Although the book points toward numerical, computer-oriented applications, strong use is made of analytical solutions. In addition, the text includes extensive worked examples that relate theory to applications and illustrate the mechanics and subtleties of the computations.
Download or read book River Water Quality Model written by P. Reichert and published by IWA Publishing. This book was released on 2001-08-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Scientific and Technical Report (STR) presents the findings of the IWA Task Group on River Water Quality Modelling (RWQM). The task group was formed to create a scientific and technical base from which to formulate standardized, consistent river water quality models and guidelines for their implementation. This STR presents the first outcome in this effort: River Water Quality Model No. 1 (RWQM1). As background to the development of River Water Quality Model No.1, the Task Group completed a critical evaluation of the current state of the practice in water quality modelling. A major limitation in model formulation is the continued reliance on BOD as the primary state variable, despite the fact BOD does not include all biodegradable matter. A related difficulty is the poor representation of benthic flux terms. As a result of these limitations, it is impossible to close mass balances completely in most existing models. These various limitations in current river water quality models impair their predictive ability in situations of marked changes in a river's pollutant load, streamflow, morphometry, or other basic characteristics. RWQM 1 is intended to serve as a framework for river water quality models that overcome these deficiencies in traditional water quality models and most particularly the failure to close mass balances between the water column and sediment. To these ends, the model incorporates fundamental water quality components and processes to characterise carbon, oxygen, nitrogen, and phosphorus (C, O, N, and P) cycling instead of biochemical oxygen demand as used in traditional models. The model is presented in terms of process and components represented via a 'Petersen stoichiometry matrix', the same approach used for the IWA Activated Sludge Models. The full RWQM1 includes 24 components and 30 processes. The report provides detailed examples on reducing the numbers of components and processes to fit specific water quality problems. Thus, the model provides a framework for both complicated and simplified models. Detailed explanations of the model components, process equations, stoichiometric parameters, and kinetic parameters are provided, as are example parameter values and two case studies. The STR is intended to launch a participatory process of model development, application, and refinement. RWQM1 provides a framework for this process, but the goal of the Task Group is to involve water quality professionals worldwide in the continued work developing a new water quality modelling approach. This text will be an invaluable reference for researchers and graduate students specializing in water resources, hydrology, water quality, or environmental modelling in departments of environmental engineering, natural resources, civil engineering, chemical engineering, environmental sciences, and ecology. Water resources engineers, water quality engineers and technical specialists in environmental consultancy, government agencies or regulated industries will also value this critical assessment of the state of practice in water quality modelling. Key Features presents a unique new technical approach to river water quality modelling provides a detailed technical presentation of the RWQM1 water quality process model gives an informative critical evaluation of the state of the practice in water quality modelling, and problems with those practices provides a step by step procedure to develop a water quality model Scientific & Technical Report No. 12
Download or read book Fundamentals of Wastewater Treatment and Engineering written by Rumana Riffat and published by CRC Press. This book was released on 2022-04-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd edition of Fundamentals of Wastewater Treatment and Design introduces readers to the fundamental concepts of wastewater treatment, followed by engineering design of unit processes for sustainable treatment of municipal wastewater and resource recovery. It has been completely updated with new chapters to reflect current advances in design, resource recovery practices and research. Another highlight is the addition of the last chapter, which provides a culminating design experience of both urban and rural wastewater treatment systems. Filling the need for a textbook focused on wastewater, it covers history, current practices, emerging concerns, future directions and pertinent regulations that have shaped the objectives of this important area of engineering. Basic principles of reaction kinetics, reactor design and environmental microbiology are introduced along with natural purification processes. It also details the design of unit processes for primary, secondary and advanced treatment, as well as solids processing and removal. Recovery of water, energy and nutrients are explained with the help of process concepts and design applications. This textbook is designed for undergraduate and graduate students who have some knowledge of environmental chemistry and fluid mechanics. Professionals in the wastewater industry will also find this a handy reference.
Download or read book Review of the New York City Watershed Protection Program written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-12-04 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: New York City's municipal water supply system provides about 1 billion gallons of drinking water a day to over 8.5 million people in New York City and about 1 million people living in nearby Westchester, Putnam, Ulster, and Orange counties. The combined water supply system includes 19 reservoirs and three controlled lakes with a total storage capacity of approximately 580 billion gallons. The city's Watershed Protection Program is intended to maintain and enhance the high quality of these surface water sources. Review of the New York City Watershed Protection Program assesses the efficacy and future of New York City's watershed management activities. The report identifies program areas that may require future change or action, including continued efforts to address turbidity and responding to changes in reservoir water quality as a result of climate change.
Download or read book Total Maximum Daily Load Analysis and Modeling written by American Society of Civil Engineers. TMDL Analysis and Modeling Task Committee and published by Asce American Society of Civil Engineers Ewri. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews more than 35 TMDL models and procedures for estimating the maximum amount of a pollutant that a water body can receive and still meet applicable water quality standards.
Download or read book Clean Coastal Waters written by National Research Council and published by National Academies Press. This book was released on 2000-08-17 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental problems in coastal ecosystems can sometimes be attributed to excess nutrients flowing from upstream watersheds into estuarine settings. This nutrient over-enrichment can result in toxic algal blooms, shellfish poisoning, coral reef destruction, and other harmful outcomes. All U.S. coasts show signs of nutrient over-enrichment, and scientists predict worsening problems in the years ahead. Clean Coastal Waters explains technical aspects of nutrient over-enrichment and proposes both immediate local action by coastal managers and a longer-term national strategy incorporating policy design, classification of affected sites, law and regulation, coordination, and communication. Highlighting the Gulf of Mexico's "Dead Zone," the Pfiesteria outbreak in a tributary of Chesapeake Bay, and other cases, the book explains how nutrients work in the environment, why nitrogen is important, how enrichment turns into over-enrichment, and why some environments are especially susceptible. Economic as well as ecological impacts are examined. In addressing abatement strategies, the committee discusses the importance of monitoring sites, developing useful models of over-enrichment, and setting water quality goals. The book also reviews voluntary programs, mandatory controls, tax incentives, and other policy options for reducing the flow of nutrients from agricultural operations and other sources.
Download or read book Water Quality Indices written by Tasneem Abbasi and published by Elsevier. This book was released on 2012-03-10 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers water quality indices (WQI) in depth – it describes what purpose they serve, how they are generated, what are their strengths and weaknesses, and how to make the best use of them. It is a concise and unique guide to WQIs for chemists, chemical/environmental engineers and government officials. Whereas it is easy to express the quantity of water, it is very difficult to express its quality because a large number of variables determine the water quality. WQIs seek to resolve the difficulty by translating a set of a large number of variables to a one-digit or a two-digit numeral. They are essential in communicating the status of different water resources in terms of water quality and the impact of various factors on it to policy makers, service personnel, and the lay public. Further they are exceedingly useful in the monitoring and management of water quality. With the importance of water and water quality increasing exponentially, the importance of this topic is also set to increase enormously because only with the use of indices is it possible to assess, express, communicate, and monitor the overall quality of any water source. Provides a concise guide to WQIs: their purpose and generation Compares existing methods and WQIs and outlines strengths and weaknesses Makes recommendations on how the indices should be used and under what circumstances they apply
Download or read book Water Quality written by Vladimir Novotny and published by . This book was released on 1994 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of the Hydrologic Simulation Program FORTRAN HSPF Watershed Water Quality Model Into the Watershed Modeling System WMS written by Patrick N. Deliman and published by . This book was released on 1999 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AQUATOX written by Dick Park and published by Elsevier. This book was released on 2021-06-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: AQUATOX: Modelling Environmental Risk and Damage Assessment, a new volume in the Developments in Environmental Modelling series, provides a single source for all AQUATOX applications, including basic equations, applications and examples on model implementation in various aquatic habitats (riverine, lacustrine and estuarine). The book presents a comprehensive reference source for AQUATOX model applications that can be used for an ecological modeling course at the graduate level. Throughout the text, chapter headings are organized to help users understand model building processes, state variables, and components. Case studies are provided to enhance learning and help readers assemble and calibrate their own AQUATOX applications. Includes a detailed description of AQUATOX equations for researchers and practitioners (including regulatory agencies) Presents study files, descriptions of implementation, and the data used as a starting point for new study applications Explores case studies of various sample applications and how specific problems are approached, including eutrophication issues in lakes and streams and natural resource damages in Estuarine Areas
