Download or read book Model Engineering for Simulation written by Lin Zhang and published by Academic Press. This book was released on 2019-02-27 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Engineering for Simulation provides a systematic introduction to the implementation of generic, normalized and quantifiable modeling and simulation using DEVS formalism. It describes key technologies relating to model lifecycle management, including model description languages, complexity analysis, model management, service-oriented model composition, quantitative measurement of model credibility, and model validation and verification. The book clearly demonstrates how to construct computationally efficient, object-oriented simulations of DEVS models on parallel and distributed environments. - Guides systems and control engineers in the practical creation and delivery of simulation models using DEVS formalism - Provides practical methods to improve credibility of models and manage the model lifecycle - Helps readers gain an overall understanding of model lifecycle management and analysis - Supported by an online ancillary package that includes an instructors and student solutions manual

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Noriako Ando and published by Springer Science & Business Media. This book was released on 2010-11-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.

Download or read book Modeling and Simulation Based Systems Engineering Handbook written by Daniele Gianni and published by CRC Press. This book was released on 2018-10-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability modeling and simulation (M&S) supplies for managing systems complexity and investigating systems behaviors has made it a central activity in the development of new and existing systems. However, a handbook that provides established M&S practices has not been available. Until now. Modeling and Simulation-Based Systems Engineering Handbook details the M&S practices for supporting systems engineering in diverse domains. It discusses how you can identify systems engineering needs and adapt these practices to suit specific application domains, thus avoiding redefining practices from scratch. Although M&S practices are used and embedded within individual disciplines, they are often developed in isolation. However, they address recurring problems common to all disciplines. The editors of this book tackled the challenge by recruiting key representatives from several communities, harmonizing the different perspectives derived from individual backgrounds, and lining them up with the book’s vision. The result is a collection of M&S systems engineering examples that offer an initial means for cross-domain capitalization of the knowledge, methodologies, and technologies developed in several communities. These examples provide the pros and cons of the methods and techniques available, lessons learned, and pitfalls to avoid. As our society moves further in the information era, knowledge and M&S capabilities become key enablers for the engineering of complex systems and systems of systems. Therefore, knowledge and M&S methodologies and technologies become valuable output in an engineering activity, and their cross-domain capitalization is key to further advance the future practices in systems engineering. This book collates information across disciplines to provide you with the tools to more efficiently design and manage complex systems that achieve their goals.

Download or read book High Performance Computing Systems Performance Modeling Benchmarking and Simulation written by Stephen Jarvis and published by Springer. This book was released on 2017-12-22 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings papers from the 8th International Workshop on Performance Modeling, Benchmarking and Simulation of High Performance Computing Systems, PMBS 2017, held in Denver, Colorado, USA, in November 2017. The 10 full papers and 3 short papers included in this volume were carefully reviewed and selected from 36 submissions. They were organized in topical sections named: performance evaluation and analysis; performance modeling and simulation; and short papers.

Download or read book Engineering Scalable Elastic and Cost Efficient Cloud Computing Applications written by Steffen Becker and published by Springer. This book was released on 2017-05-31 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the problems involved in engineering scalable, elastic, and cost-efficient cloud computing services and describes the CloudScale method — a description of rescuing tools and the required steps to exploit these tools. It allows readers to analyze the scalability problem in detail and identify scalability anti-patterns and bottlenecks within an application. With the CloudScale method, software architects can analyze both existing and planned IT services. The method allows readers to answer questions like: • With an increasing number of users, can my service still deliver acceptable quality of service? • What if each user uses the service more intensively? Can my service still handle it with acceptable quality of service? • What if the number of users suddenly increases? Will my service still be able to handle it? • Will my service be cost-efficient? First the book addresses the importance of scalability, elasticity, and cost-efficiency as vital quality-related attributes of modern cloud computing applications. Following a brief overview of CloudScale, cloud computing applications are then introduced in detail and the aspects that need to be captured in models of such applications are discussed. In CloudScale, these aspects are captured in instances of the ScaleDL modeling language. Subsequently, the book describes the forward engineering part of CloudScale, which is applicable when developing a new service. It also outlines the reverse and reengineering parts of CloudScale, which come into play when an existing (legacy) service is modified. Lastly, the book directly focuses on the needs of both business-oriented and technical managers by providing guidance on all steps of implementing CloudScale as well as making decisions during that implementation. The demonstrators and reference projects described serve as a valuable starting point for learning from experience. This book is meant for all stakeholders interested in delivering scalable, elastic, and cost-efficient cloud computing applications: managers, product owners, software architects and developers alike. With this book, they can both see the overall picture as well as dive into issues of particular interest.

Download or read book Proceedings of the 12th International Conference on Computer Engineering and Networks written by Qi Liu and published by Springer Nature. This book was released on 2022-10-19 with total page 1506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceeding is a collection of the papers accepted by the CENet2022 – the 12th International Conference on Computer Engineering and Networks held on November 4-7, 2022 in Haikou, China. The topics focus but are not limited to Internet of Things and Smart Systems, Artificial Intelligence and Applications, Communication System Detection, Analysis and Application, and Medical Engineering and Information Systems. Each part can be used as an excellent reference by industry practitioners, university faculties, research fellows and undergraduates as well as graduate students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by this conference proceedings. This will enable them to produce, maintain, and manage systems with high levels of trustworthiness and complexity.

Download or read book Software Reuse in the Emerging Cloud Computing Era written by Yang, Hongji and published by IGI Global. This book was released on 2012-04-30 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book clarifies the present fast-advancing literature of the current state of art and knowledge in the areas of the development and reuse of reusable assets in emerging software systems and applications"--Provided by publisher.

Download or read book Modelling and Simulation for Autonomous Systems written by Jan Hodicky and published by Springer. This book was released on 2015-08-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-workshop proceedings of the First International Workshop on Modelling and Simulation for Autonomous Systems, MESAS 2014, held in Rome, Italy, in May 2014. The 32 revised full papers included in the volume were carefully reviewed and selected from 50 submissions, of which 46 were presented at the workshop. They are organized in the following topical sections: unmanned aerial vehicle, distributed simulation, robot system, military application, validation, human-machine communication, gazebo simulator, and algorithm.

Download or read book Software Engineering with Reusable Components written by Johannes Sametinger and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a clear understanding of what software reuse is, where the problems are, what benefits to expect, the activities, and its different forms. The reader is also given an overview of what sofware components are, different kinds of components and compositions, a taxonomy thereof, and examples of successful component reuse. An introduction to software engineering and software process models is also provided.

Download or read book Reuse in Emerging Software Engineering Practices written by Sihem Ben Sassi and published by Springer Nature. This book was released on 2020-11-30 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 19th International Conference on Software and Systems Reuse, ICSR 2020, held in Hammamet, Tunesia in December 2020. Due to COVID-19 pandemic the Conference was held virtually. The 16 full papers and 2 short papers included in this book were carefully reviewed and selected from 60 submissions. The papers were organized in topical sections named: modelling, reuse in practice, reengineering, recommendation, and empirical analysis.

Download or read book Modeling and Simulating Software Architectures written by Ralf H. Reussner and published by MIT Press. This book was released on 2016-10-28 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new, quantitative architecture simulation approach to software design that circumvents costly testing cycles by modeling quality of service in early design states. Too often, software designers lack an understanding of the effect of design decisions on such quality attributes as performance and reliability. This necessitates costly trial-and-error testing cycles, delaying or complicating rollout. This book presents a new, quantitative architecture simulation approach to software design, which allows software engineers to model quality of service in early design stages. It presents the first simulator for software architectures, Palladio, and shows students and professionals how to model reusable, parametrized components and configured, deployed systems in order to analyze service attributes. The text details the key concepts of Palladio's domain-specific modeling language for software architecture quality and presents the corresponding development stage. It describes how quality information can be used to calibrate architecture models from which detailed simulation models are automatically derived for quality predictions. Readers will learn how to approach systematically questions about scalability, hardware resources, and efficiency. The text features a running example to illustrate tasks and methods as well as three case studies from industry. Each chapter ends with exercises, suggestions for further reading, and “takeaways” that summarize the key points of the chapter. The simulator can be downloaded from a companion website, which offers additional material. The book can be used in graduate courses on software architecture, quality engineering, or performance engineering. It will also be an essential resource for software architects and software engineers and for practitioners who want to apply Palladio in industrial settings.

Download or read book Supercomputing Research Advances written by Yongge Huáng and published by Nova Publishers. This book was released on 2008 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercomputers are used for highly calculation-intensive tasks such as problems involving quantum mechanical physics, weather forecasting, climate research (including research into global warming), molecular modelling (computing the structures and properties of chemical compounds, biological macromolecules, polymers, and crystals), physical simulations (such as simulation of aeroplanes in wind tunnels, simulation of the detonation of nuclear weapons, and research into nuclear fusion), cryptanalysis, and the like. Major universities, military agencies and scientific research laboratories are heavy users. This book presents the latest research in the field from around the world.

Download or read book Euro Par 2003 Parallel Processing written by Harald Kosch and published by Springer. This book was released on 2004-06-01 with total page 1355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Euro-ParConferenceSeries The European Conference on Parallel Computing (Euro-Par) is an international conference series dedicated to the promotion and advancement of all aspects of parallel and distributed computing. The major themes fall into the categories of hardware, software, algorithms, and applications. This year, new and interesting topicswereintroduced,likePeer-to-PeerComputing,DistributedMultimedia- stems, and Mobile and Ubiquitous Computing. For the ?rst time, we organized a Demo Session showing many challenging applications. The general objective of Euro-Par is to provide a forum promoting the de- lopment of parallel and distributed computing both as an industrial technique and an academic discipline, extending the frontiers of both the state of the art and the state of the practice. The industrial importance of parallel and dist- buted computing is supported this year by a special Industrial Session as well as a vendors’ exhibition. This is particularly important as currently parallel and distributed computing is evolving into a globally important technology; the b- zword Grid Computing clearly expresses this move. In addition, the trend to a - bile world is clearly visible in this year’s Euro-Par. ThemainaudienceforandparticipantsatEuro-Parareresearchersinaca- mic departments, industrial organizations, and government laboratories. Euro- Par aims to become the primary choice of such professionals for the presentation of new results in their speci?c areas. Euro-Par has its own Internet domain with a permanent Web site where the history of the conference series is described: http://www.euro-par.org. The Euro-Par conference series is sponsored by the Association for Computer Machinery (ACM) and the International Federation for Information Processing (IFIP).

Download or read book Modeling and Simulation Based Analysis in Reliability Engineering written by Mangey Ram and published by CRC Press. This book was released on 2018-07-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in reliability engineering has become the most challenging and demanding area of research. Modeling and Simulation, along with System Reliability Engineering has become a greater issue because of high-tech industrial processes, using more complex systems today. This book gives the latest research advances in the field of modeling and simulation, based on analysis in engineering sciences. Features Focuses on the latest research in modeling and simulation based analysis in reliability engineering. Covers performance evaluation of complex engineering systems Identifies and fills the gaps of knowledge pertaining to engineering applications Provides insights on an international and transnational scale Modeling and Simulation Based Analysis in Reliability Engineering aims at providing a reference for applications of mathematics in engineering, offering a theoretical sound background with adequate case studies, and will be of interest to researchers, practitioners, and academics.

Download or read book Smart Product Engineering written by Michael Abramovici and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of papers in this book comprises the proceedings of the 23rd CIRP Design Conference held between March 11th and March 13th 2013 at the Ruhr-Universität Bochum in Germany. The event was organized in cooperation with the German Academic Society for Product Development – WiGeP. The focus of the conference was on »Smart Product Engineering«, covering two major aspects of modern product creation: the development of intelligent (“smart”) products as well as the new (“smart”) approach of engineering, explicitly taking into account consistent systems integration. Throughout the 97 papers contained in these proceedings, a range of topics are covered, amongst them the different facets and aspects of what makes a product or an engineering solution “smart”. In addition, the conference papers investigate new ways of engineering for production planning and collaboration towards Smart Product Engineering. The publications provide a solid insight into the pressing issues of modern digital product creation facing increasing challenges in a rapidly changing industrial environment. They also give implicit advice how a “smart” product or engineering solution (processes, methods and tools) needs to be designed and implemented in order to become successful.

Download or read book Texas Instruments Technical Journal written by and published by . This book was released on 1994 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Large Scale Computing Techniques for Complex System Simulations written by Werner Dubitzky and published by John Wiley & Sons. This book was released on 2012-02-03 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex systems modeling and simulation approaches are being adopted in a growing number of sectors, including finance, economics, biology, astronomy, and many more. Technologies ranging from distributed computing to specialized hardware are explored and developed to address the computational requirements arising in complex systems simulations. The aim of this book is to present a representative overview of contemporary large-scale computing technologies in the context of complex systems simulations applications. The intention is to identify new research directions in this field and to provide a communications platform facilitating an exchange of concepts, ideas and needs between the scientists and technologist and complex system modelers. On the application side, the book focuses on modeling and simulation of natural and man-made complex systems. On the computing technology side, emphasis is placed on the distributed computing approaches, but supercomputing and other novel technologies are also considered.