Download or read book Punching shear of structural concrete slabs written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2017 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 81 reports the latest information available to researchers and practitioners on the analysis, design and experimental evidence of punching shear of structural concrete slabs. It follows previous efforts by the International Federation for Structural Concrete (fib) and its predecessor the Euro-International Committee for Concrete (CEB), through CEB Bulletin 168, Punching Shear in Reinforced Concrete (1985) and fibBulletin 12, Punching of structural concrete slabs (2001), and an international symposium sponsored by the punching shear subcommittee of ACI Committee 445 (Shear and Torsion) and held in Kansas City, Mo., USA, in 2005. This bulletin contains 18 papers that were presented in three sessions as part of an international symposium held in Philadelphia, Pa., USA, on October 25, 2016. The symposium was co-organized by the punching shear sub-committee of ACI 445 and by fib Working Party 2.2.3 (Punching and Shear in Slabs) with the objectives of not only disseminating information on this important design subject but also promoting harmonization among the various design theories and treatment of key aspects of punching shear design. The papers are organized in the same order they were presented in the symposium. The symposium honored Professor Emeritus Neil M. Hawkins (University of Illinois at Urbana-Champaign, USA), whose contributions through the years in the field of punching shear of structural concrete slabs have been paramount. The papers cover key aspects related to punching shear of structural concrete slabs under different loading conditions, the study of size effect on punching capacity of slabs, the effect of slab reinforcement ratio on the response and failure mode of slabs, without and with shear reinforcement, and its implications for the design and formulation in codes of practice, an examination of different analytical tools to predict the punching shear response of slabs, the study of the post-punching response of concrete slabs, the evaluation of design provisions in modern codes based on recent experimental evidence and new punching shear theories, and an overview of the combined efforts undertaken jointly by ACI 445 and fib WP 2.2.3 to generate test result databanks for the evaluation and calibration of punching shear design recommendations in North American and international codes of practice.
Download or read book Reinforced Concrete Flat Plates Under Lateral Loading written by Austin P. Pan and published by . This book was released on 1988 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind and Seismic Effects written by United States-Japan Cooperative Program in Natural Resources. Panel on Wind and Seismic Effects. Joint Meeting and published by . This book was released on 1991 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1982 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by Institution of Civil Engineers (Great Britain) and published by . This book was released on 1990 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Institution of Civil Engineers written by Institution of Civil Engineers (Great Britain) and published by . This book was released on 1990 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.
Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Engineering Research Center Library Printed Catalog written by University of California, Berkeley. Earthquake Engineering Research Center. Library and published by . This book was released on 1975 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Download or read book Announcement written by University of Michigan. College of Engineering and published by UM Libraries. This book was released on 1967 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Technology Publications written by Center for Building Technology and published by . This book was released on 1982 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Punching Shear in Reinforced Concrete Slabs written by Maria Anna Polak and published by . This book was released on 2005 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the American Concrete Institute written by American Concrete Institute and published by . This book was released on 1983 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each number includes "Synopsis of recent articles."
