Download or read book Resource Allocation Problems in Supply Chains written by K. Ganesh and published by Emerald Group Publishing. This book was released on 2015-08-10 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource Allocation is the utilization of available resources in the system. This book focuses on development of models for 6 new, complex classes of RA problems in Supply Chain networks, focusing on bi-objectives, dynamic input data, and multiple performance measure based allocation and integrated allocation, and routing with complex constraints.

Download or read book Modeling and Optimization of Resource Allocation in Supply Chain Management Problems written by Qi Yuan (Logistician) and published by . This book was released on 2013 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource allocation in supply chain management studies how to allocate the limited available resources economically/optimally to satisfy the demands. It is an important research area in operations research. This dissertation focuses on the modeling and optimization of three problems. The first part of the dissertation investigates an important and unique problem in a supply chain distribution network, namely minimum cost network flow with variable lower bounds (MCNF-VLB). This type of network can be used to optimize the utilization of distribution channels (i.e., resources) in a large supply network, in order to minimize the total cost while satisfying flow conservation, lower and upper bounds, and demand/supply constraints. The second part of the dissertation introduces a novel method adopted from multi-product inventory control to optimally allocate the cache space and the frequency (i.e., resources) for multi-stream data prefetching in computer science. The objective is to minimize the cache miss level (backorder level), while satisfying the cache space (inventory space) and the total prefetching frequency (total order frequency) constraints. Also, efforts have also been made to extend the model for a multi-level, multi-stream prefetching system. The third part of the dissertation studies the joint capacity (i.e., resources) and demand allocation problem in a service delivery network. The objective is to minimize the total cost while satisfying a required service reliability, which measures the probability of satisfying customer demand within a delivery time interval.

Download or read book Supply Chain written by Vedran Kordic and published by IntechOpen. This book was released on 2008-02-01 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally supply chain management has meant factories, assembly lines, warehouses, transportation vehicles, and time sheets. Modern supply chain management is a highly complex, multidimensional problem set with virtually endless number of variables for optimization. An Internet enabled supply chain may have just-in-time delivery, precise inventory visibility, and up-to-the-minute distribution-tracking capabilities. Technology advances have enabled supply chains to become strategic weapons that can help avoid disasters, lower costs, and make money. From internal enterprise processes to external business transactions with suppliers, transporters, channels and end-users marks the wide range of challenges researchers have to handle. The aim of this book is at revealing and illustrating this diversity in terms of scientific and theoretical fundamentals, prevailing concepts as well as current practical applications.

Download or read book Supply Chain written by Vedran Kordic and published by IntechOpen. This book was released on 2008-02-01 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally supply chain management has meant factories, assembly lines, warehouses, transportation vehicles, and time sheets. Modern supply chain management is a highly complex, multidimensional problem set with virtually endless number of variables for optimization. An Internet enabled supply chain may have just-in-time delivery, precise inventory visibility, and up-to-the-minute distribution-tracking capabilities. Technology advances have enabled supply chains to become strategic weapons that can help avoid disasters, lower costs, and make money. From internal enterprise processes to external business transactions with suppliers, transporters, channels and end-users marks the wide range of challenges researchers have to handle. The aim of this book is at revealing and illustrating this diversity in terms of scientific and theoretical fundamentals, prevailing concepts as well as current practical applications.

Download or read book Evolution of Supply Chain Management written by Yoon Seok Chang and published by Springer Science & Business Media. This book was released on 2004-03-31 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last half of the twentieth century industry encountered a revolutionary change brought about by the harnessed power of seemingly ever-increasing capacity, speed and functionality of computers and microprocessors. This strength provided management and workers within industries with new capabilities for management, planning and control, design, quality assurance and customer support. Organized information flow became the mainstay of industrial companies. New tools and information technology systems emerged and evolved to enable companies to integrate the various departments (Design, Procurement, Manufacturing, Sales and Finance) within companies, particularly the lager ones, including international corporations. This was to give them a chance to meet new demands for product time to market, just in time supply of orders, and customer support. To the smaller company these changes were not so apparent. Neither the tools nor systems nor indeed their economic value seemed appropriate to them except for special cases. While all this was happening the structure of the larger companies began to disintegrate. Strong competitive pressures and globalization of the market place brought this about. Shedding unwanted competence and subcontracting it to others became common practice. Regional market pressures triggered companies to reorganize to create, produce, and distribute goods and services. Greater dependency on chains of supply from external companies became the norm. Medium and smaller sized companies began to gain some advantage and at the same time some were sucked into management and control systems governed by the larger companies.

Download or read book Supply Chain Management on Demand written by Chae An and published by Springer Science & Business Media. This book was released on 2005-04-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by supply chain researchers, consultants, and practitioners, this book explains the newly emerging techniques and practices for highly efficient supply chain management, made possible by the rapid progress in information and communication technologies.

Download or read book Optimization of Resource Allocation in Supply Chain Management written by Zihui Tang and published by . This book was released on 2001 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Supply Chain Management Models written by Hamed Fazlollahtabar and published by CRC Press. This book was released on 2018-01-02 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply Chain Management (SCM) is a wide field in which several specialties are included. In general, operations and production management players use SCM to organize the problems and analyze the solution approaches. Due to these points, a reference which can encompass a range of problems and their modelling approaches is required. This book will contain three general sections of forward, reverse, intelligent, and uncertain problems. While the book provides different problems in the three commonly used categories in SCM, it is very helpful for the readers to find out, or adapt their own application studies to the ones given in the book and employ the corresponding modeliing approach.

Download or read book Emerging Frontiers in Operations and Supply Chain Management written by B. Vipin and published by Springer Nature. This book was released on 2021-09-15 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book addresses the challenges in managing the operations and supply chain of organizations in the era of internet of things and Industry 4.0. It presents cutting edge research on real world operations related problems, in-depth analyses, and relevant managerial implications. Wide variety of solution approaches such as quantitative, quantitative, and simulations are presented in the context of managing the operations and supply chains. Consisting of selected papers from the XXIII Annual International Conference of Society of Operations Management, this volume is part of a two volume series with the other book consisting of chapters on quantitative decision making. This edited book covers various quantitative models on operations and supply chain management such as inventory optimization, machine learning-operations research integrated model for healthcare systems, game-theoretic analysis of review strategies in truthful information sharing, design of contracts in supply chains, supply chain optimization, inventory routing, and shop floor scheduling. In addition to the quantitative models, several innovative heuristics are proposed for different problems. This book explores qualitative models on improving the performance of small and medium enterprises and petroleum industries and a simulation model for staff allocation in the information technology industry. Finally, this book provides review articles on vaccine supply chains and behavioral operations management. The book throws light on the emerging trends in the use of analytics, optimization, and simulation tools and empirical analysis to improve the performance of operations and supply chains of organizations. It will serve as an essential resource for practitioners, students, faculty members and scholars in operations management and related areas to gain knowledge and pursue high quality research on developments in areas such as managing the resource management and the solution methodology---innovative tools employed in addressing the real world problems and the different optimization techniques.

Download or read book Supply Chain Management and Knowledge Management written by A. Dwivedi and published by Springer. This book was released on 2008-11-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in IT have transformed the way organizations interact with each other. To enable organizations to respond to this change, new management paradigms have evolved. This text looks at the value of knowledge management in supply chain management and how supply chain partners can use IT to improve organizational performance.

Download or read book Four Essays on Allocation Problems in Supply Chain Management written by Milad Keshvari Fard and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: We address three different allocation problems for which the literature tends to ignore the complex nature of their objective. The problems under study fall under two different contexts of non-profit and commercial operations. The first part of the dissertation investigate the allocation of scarce resources in humanitarian organizations, given the marginally decreasing contribution of investment on the beneficiaries welfare. The main objective in this part is to maximize the well-being of people. Chapter 2 studies the decision making in a humanitarian organization regarding the procurement and utilization of operational assets in a dynamic setting, to minimize people's suffering. Chapter 3 investigates the budgeting decisions by an international humanitarian organization in order to maximize the overall utility from their operations around the globe. The second part of the dissertation, studies the Modular Hub Location Problem, for which the objective concerns minimization of the transportation cost. We propose two different approaches to overcome the complex nature of the problem in order to achieve solutions of higher quality. Chapter 4 proposes a modeling simplification by replacing the stepwise cost function with a best-fit linear approximation, which allows to solve larger instances using exact solution approaches. Chapter 5, on the other hand, develops an efficient heuristic that can solve large problem instances with small optimality gaps in a short period of time.

Download or read book Digital Manufacturing written by Chandrakant D. Patel and published by Elsevier. This book was released on 2023-12-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Manufacturing: Key Elements of a Digital Factory explains the different devices and agents at the factory floor level that are driving the digital manufacturing revolution, including autonomous robots, process automation, artificial intelligence and cyber-physical systems. Individual chapters explore the fundamentals and benefits of major digital manufacturing tools including robotics, the industrial internet of things, digital twins, edge security, knowledge discovery, service-centric production, and related supply-chain strategies. Real-world case studies from industry are provided throughout to show how these work in practice. In addition to learning about individual technologies, readers will discover how they are integrating to drive the digital transformation of manufacturing ecosystem. Final sections present new business models working towards sustainable net zero operations and economy. - Helps produce the "T-shaped" engineers needed in today's digital manufacturing age by providing carefully selected foundational information from a range of disciplines - Includes important coverage of cybersecurity models and analysis - Draws on industry best practice to explain how to implement cutting-edge technologies successfully

Download or read book Project Management written by Ted Klastorin and published by SAGE Publications. This book was released on 2020-08-13 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the number and size of projects continue to increase, there is a growing demand for effective project managers. Project Management: A Risk-Management Approach prepares students to successfully navigate the many challenges, factors, and situations that project managers face. Authors Ted Klastorin and Gary Mitchell emphasize the importance of mitigating risk at every stage, helping students avoid common pitfalls that lead to project failures, compromised schedules, or incurred costs. Real-world examples, cases, solved problems, and practice problems help bring methodologies to life. Readers will be equipped with the tools they need to plan, schedule, and monitor even the most complex projects in a variety of market sectors. Included with this title: The password-protected Instructor Resource Site (formally known as SAGE Edge) offers access to all text-specific resources, including a test bank and editable, chapter-specific PowerPoint® slides.

Download or read book Supply Chain Optimization written by Joseph Geunes and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply Chain Optimization captures the latest results in a segment of current research activity in supply chain management. This research area focuses on applying optimization techniques to supply chain management problems. The research papers that make up the volume provide a snapshot of state-of-the-art optimization methods within the field. This book presents rigorous modelling approaches for supply chain operations problems with a goal of improving supply chain performance (or the performance of some segment thereof). It contains high-quality works from leading researchers in the field whose expertise fits within this scope. The book provides a diverse blend of research topics and novel modelling and solution approaches for difficult classes of supply chain operations, planning, and design problems.

Download or read book Handbook of Quantitative Supply Chain Analysis written by David Simchi-Levi and published by Taylor & Francis. This book was released on 2004-05-31 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook is a comprehensive research reference that is essential for anyone interested in conducting research in supply chain. Unique features include: -A focus on the intersection of quantitative supply chain analysis and E-Business, -Unlike other edited volumes in the supply chain area, this is a handbook rather than a collection of research papers. Each chapter was written by one or more leading researchers in the area. These authors were invited on the basis of their scholarly expertise and unique insights in a particular sub-area, -As much attention is given to looking back as to looking forward. Most chapters discuss at length future research needs and research directions from both theoretical and practical perspectives, -Most chapters describe in detail the quantitative models used for analysis and the theoretical underpinnings; many examples and case studies are provided to demonstrate how the models and the theoretical insights are relevant to real situations, -Coverage of most state-of-the-art business practices in supply chain management.

Download or read book Complexity Management in Supply Chains written by Thorsten Blecker and published by Erich Schmidt Verlag GmbH & Co KG. This book was released on 2006 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply chains are faced with a rising complexity with manifold effects. Because of the strong link between a supply chain's complexity and its efficiency, supply chain complexity management becomes a major challenge of today's business management. Therefore logistics and the supply chain management can play a significant role in mastering and managing complexity. The new book, edited by Thorsten Blecker and Wolfgang Kersten, is exemplifying the current progress in complexity management. Separate chapters are dedicated to clarify complexity management in transportation, networks and supply chains. It offers important insights of global and flexible network modelling to manage complexity, complexity in supply chains - developing human resource strategy, performance measurement of green supply chain management, complexity in transportation by means of containers and air-cargos. The volume, written by well-known experts of supply chain management from all over the world, shows applicable solutions, practical examples and use cases to illustrate complexity management and its application in logistics and supply chain management. It presents the central perspectives for a modern complexity management in supply chains. Therefore the book offers a fundamental understanding for workable complexity management concept their implementation to practitioners. The book offers fundamental insights into actual problems of an general complexity management concept and their implementation to practitioners in industry, logistics, management, service sector, research and apprenticeship. In addition to this it gives a valuable insight to the status of complexity management also for lecturers and students.

Download or read book Handbook of Research on Supply Chain Resiliency Efficiency and Visibility in the Post Pandemic Era written by Ramakrishna, Yanamandra and published by IGI Global. This book was released on 2022-04-15 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The COVID-19 pandemic has adversely affected the supply chains of all sectors of business worldwide. The pandemic has made it evident that by managing supply chains in a traditional manner organizations will no longer be able to achieve profits and improve customer satisfaction. This calls for immediate structural changes in organizations, flexible organizational culture, and a sense of urgency to redefine strategies related to supply chains. The Handbook of Research on Supply Chain Resiliency, Efficiency, and Visibility in the Post-Pandemic Era explores diverse strategies for achieving capabilities related to supply chain resilience and seeks to expand the existing body of knowledge in this area. It develops models, frameworks, and theoretical concepts related to supply chain resilience to enhance efficiency and improve visibility of supply chains. Covering topics such as change management, production relocation, and supply chain risk, this book is an essential reference for business leaders, corporate executives, industry practitioners, researchers, academicians, educators, and students.