Download or read book PEM Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2021-11-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters Presents state-of-the-art PEMFC research alongside the underlying concepts

Download or read book Research Development of Proton exchange Membrane PEM Fuel Cell System for Transportation Applications written by and published by . This book was released on 1996 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuel Cells for Transportation written by Prodip K. Das and published by Elsevier. This book was released on 2023-05-19 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells for Transportation: Fundamental Principles and Applications is the first comprehensive reference on the application of fuel cells for light- and heavy-duty transportation. Addressing the subject from both a materials and engineering perspective, the book examines integration, modeling, and optimization of fuel cells from fundamentals to the latest advances. Chapters address every aspect of fuel cell systems for transport applications, including performance optimization, stack characterization, low-cost materials and catalysts, design of bipolar plates and flow fields, water and thermal management, durability under automotive driving cycles, cold start, state of the art characterization, optimization of various components, and more. Each chapter reviews the fundamental principles of the topic before going on to examine the latest developments alongside current applications and real-world case studies. This is an essential reference for graduate students and researchers working on fuel cells for transport applications, as well as professional engineers involved in the application of fuel cells and clean energy and working in any sector of the transportation industry. Presents a comprehensive examination of the technologies, integration and application of fuel cells for transportation, from the fundamentals to the latest advances Examines the latest challenges, market outlooks and targets for fuel cells in light-duty and heavy-duty vehicles Offers solutions to fuel-cell system integration problems, optimization of operating conditions, and improvements for fuel-cell materials based on the latest developments Addresses key barriers to the commercial success of fuel cells for transportation, including durability, performance, materials and how to balance these factors

Download or read book PEM Fuel Cells written by Felicia Buchanan and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton Exchange Membrane (PEM) fuel cells are still undergoing intense development, and the combination of new and optimised materials, improved product development, novel architectures, more efficient transport processes, and design optimisation and integration are expected to lead to major gains in performance, efficiency, durability, reliability, manufacturability and cost-effectiveness. The potential of fuel cells as an energy source to replace fossil fuels in a wide range of applications, has now become a reality that is environmentally friendly and helps support the sustainable development of the planet. A fuel cell is a device that converts the chemical energy contained in a fuel, generally hydrogen, into electrical and thermal energy, in the presence of an oxidant, which can either be either air or oxygen. This book discusses the theories, performance and applications of PEM fuel cells.

Download or read book Proton Exchange Membrane Fuel Cells written by David P. Wilkinson and published by CRC Press. This book was released on 2009-11-24 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Detailed, Up-to-Date Treatment of Key Developments in PEMFC MaterialsThe potential to revolutionize the way we power our worldBecause of its lower temperature and special polymer electrolyte membrane, the proton exchange membrane fuel cell (PEMFC) is well-suited for transportation, portable, and micro fuel cell applications. But the performance o

Download or read book Proton Exchange Membrane Fuel Cells 8 written by T. Fuller and published by The Electrochemical Society. This book was released on 2008-10 with total page 2220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international symposium is devoted to all aspects of research, development, and engineering of proton exchange membrane (PEM) fuel cells and stacks, as well as low-temperature direct-fuel cells. The intention is to bring together the international community working on the subject and to enable effective interactions between research and engineering communities.

Download or read book Proton Exchange Membrane Fuel Cells 9 written by T. Fuller and published by The Electrochemical Society. This book was released on 2009-09 with total page 2100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions is devoted to all aspects of research, development, and engineering of proton exchange membrane (PEM) fuel cells and attacks, as well as low-temperature direct-fuel cells. The intention of the symposium is to bring together the international community working on the subject and to enable effective interactions between the research and engineering communities. This issue is sold as a two-part set.

Download or read book Proton Exchange Membrane Fuel Cells written by Alhussein Albarbar and published by Springer. This book was released on 2017-11-17 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the characteristics of Proton Exchange Membrane (PEM) Fuel Cells with a focus on deriving realistic finite element models. The book also explains in detail how to set up measuring systems, data analysis, and PEM Fuel Cells’ static and dynamic characteristics. Covered in detail are design and operation principles such as polarization phenomenon, thermodynamic analysis, and overall voltage; failure modes and mechanisms such as permanent faults, membrane degradation, and water management; and modelling and numerical simulation including semi-empirical, one-dimensional, two-dimensional, and three-dimensional models. It is appropriate for graduate students, researchers, and engineers who work with the design and reliability of hydrogen fuel cells, in particular proton exchange membrane fuel cells.

Download or read book Proton Exchange Membrane Fuel Cells 6 written by Thomas Francis Fuller and published by The Electrochemical Society. This book was released on 2006 with total page 1385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium was devoted to all aspects of research development and engineering of proton exchange membrane fuel cells. Three subareas were covered: materials and electrode processes, fuel cell systems, and durability.

Download or read book Low Platinum Fuel Cell Technologies written by Junliang Zhang and published by Springer. This book was released on 2020-11-21 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the fundamental physics and chemistry of the proton exchange membrane fuel cell (PEMFC), followed by discussions on recent advances in low platinum electrocatalysis and related catalyst development for PEMFC (the book’s primary focus), methods of membrane electrode assembly (MEA) fabrication for low platinum catalysts, and durability issues in connection with MEA. While energy and environmental issues are becoming the two main subjects in global sustainable development, the proton exchange membrane fuel cell (PEMFC), a clean and efficient new energy technology, has attracted more and more attention in recent years The major hurdle for more extensive applications of the PEMFC, especially for the automotive sector, is the high platinum loading requirement. Readers will gain a comprehensive understanding of the fundamentals and methods of low platinum PEMFC. This book is intended for researchers, engineers and graduate students in the fields of new energy technology, the fuel cell vehicle industry and fuel cell design.

Download or read book High Temperature Polymer Electrolyte Membrane Fuel Cells written by Qingfeng Li and published by Springer. This book was released on 2015-10-15 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive review of high-temperature polymer electrolyte membrane fuel cells (PEMFCs). PEMFCs are the preferred fuel cells for a variety of applications such as automobiles, cogeneration of heat and power units, emergency power and portable electronics. The first 5 chapters of the book describe rationalization and illustration of approaches to high temperature PEM systems. Chapters 6 - 13 are devoted to fabrication, optimization and characterization of phosphoric acid-doped polybenzimidazole membranes, the very first electrolyte system that has demonstrated the concept of and motivated extensive research activity in the field. The last 11 chapters summarize the state-of-the-art of technological development of high temperature-PEMFCs based on acid doped PBI membranes including catalysts, electrodes, MEAs, bipolar plates, modelling, stacking, diagnostics and applications.

Download or read book PEM Fuel Cell Testing and Diagnosis written by Jiujun Zhang and published by Newnes. This book was released on 2013-01-22 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cell Testing and Diagnosis covers the recent advances in PEM (proton exchange membrane) fuel cell systems, focusing on instruments and techniques for testing and diagnosis, and the application of diagnostic techniques in practical tests and operation. This book is a unique source of electrochemical techniques for researchers, scientists and engineers working in the area of fuel cells. Proton exchange membrane fuel cells are currently considered the most promising clean energy-converting devices for stationary, transportation, and micro-power applications due to their high energy density, high efficiency, and environmental friendliness. To advance research and development of this emerging technology, testing and diagnosis are an essential combined step. This book aids those efforts, addressing effects of humidity, temperature and pressure on fuel cells, degradation and failure analysis, and design and assembly of MEAs, single cells and stacks. Provides fundamental and theoretical principles for PEM fuel cell testing and diagnosis. Comprehensive source for selecting techniques, experimental designs and data analysis Analyzes PEM fuel cell degradation and failure mechanisms, and suggests failure mitigation strategies Provides principles for selecting PEM fuel cell key materials to improve durability

Download or read book Recent Advances in High Temperature PEM Fuel Cells written by Sivakumar Pasupathi and published by Academic Press. This book was released on 2016-09-13 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen and Fuel Cells Primers is a series focused on Energy applications. Its concise volumes present those coming into this broad and multidisciplinary field with the most recent advances in each of its particular topics. They bring together information that has thus far been scattered in many different sources under one single title, which makes them a useful reference for industry professionals, researchers and graduate students, especially those starting in a new topic of research. This volume, Recent Advances in High Temperature PEM Fuel Cells, provides an up-to-date progress of High Temperature Polymer Electrolyte Membrane Fuel Cells (HTPEMFCs), including three critical subjects for this type of fuel cells: Membrane Electrode Assembly (MEA) development, stack development and systems development. The MEA and stack development sections cover the recent advances in this area and highlight the areas in most need of improvement. The systems development section focuses on stationary systems, mainly Combined Heat and Power (CHP), based on HTPEMFCs. Finally the conclusions summarize the recent advances of HTPEMFCs in all these areas and provide some insights for future developments. Prof. Bruno G. Pollet, Series Editor Presents the most current knowledge in membrane electrode assembly, stack, and systems development for HTPEMFCs Highlights the areas that need improvement in electrode assembly and stack development Examines stationary high temperature PEMFC systems, including CHP

Download or read book Membranes for Low Temperature Fuel Cells written by Surbhi Sharma and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-06-04 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membranes for Low Temperature Fuel Cells provides a comprehensive review of novel and state-of-the-art polymer electrolyte membrane fuel cells (PEMFC) membranes. The author highlights requirements and considerations for a membrane as an integral part of PEMFC and its interactions with other components. It is an indispensible resource for anyone interested in new PEMFC membrane materials and concerned with the development, optimisation and testing of such membranes. Various composite membranes (polymer and non-polymer) are discussed along with analyses of the latest fi ller materials like graphene, ionic liquids, polymeric ionic liquids, nanostructured metal oxides and membrane concepts unfolding in the field of PEMFC. This book provides the latest academic and technical developments in PEMFC membranes with thorough insights into various preparation, characterisation, and testing methods utilised. Factors affecting proton conduction, water adsorption, and transportation behaviour of membranes are also deliberated upon. Provides the latest academic and technical developments in PEMFC membranes. Reviews recent literature on ex situ studies and in situ single-cell and stack tests investigating the durability (chemical, thermomechanical) and degradation of membranes. Surbhi Sharma, MSc, PhD Working on graphene oxide and fuel cells since 2007, she has published about 50 research articles/book chapters and holds a patent. She has also been awarded various research grants.

Download or read book PEM Fuel Cell Electrocatalysts and Catalyst Layers written by Jiujun Zhang and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton exchange membrane (PEM) fuel cells are promising clean energy converting devices with high efficiency and low to zero emissions. Such power sources can be used in transportation, stationary, portable and micro power applications. The key components of these fuel cells are catalysts and catalyst layers. “PEM Fuel Cell Electrocatalysts and Catalyst Layers” provides a comprehensive, in-depth survey of the field, presented by internationally renowned fuel cell scientists. The opening chapters introduce the fundamentals of electrochemical theory and fuel cell catalysis. Later chapters investigate the synthesis, characterization, and activity validation of PEM fuel cell catalysts. Further chapters describe in detail the integration of the electrocatalyst/catalyst layers into the fuel cell, and their performance validation. Researchers and engineers in the fuel cell industry will find this book a valuable resource, as will students of electrochemical engineering and catalyst synthesis.

Download or read book Transport Phenomena in Fuel Cells written by Bengt Sundén and published by WIT Press. This book was released on 2005 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are expected to play a significant role in the next generation of energy systems and road vehicles for transportation. However, substantial progress is required in reducing manufacturing costs and improving performance. This book aims to contribute to the understanding of the transport processes in solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC) and direct methanol fuel cells (DMFC), which are of current interest. A wide range of topics is covered, featuring contributions from prominent scientists and engineers in the field. A detailed summary of state-of-the-art knowledge and future needs, this text will be of value to graduate students and researchers working on the development of fuel cells within academia and industry.

Download or read book Proton Exchange Membrane Fuel Cell written by Tolga Taner and published by BoD – Books on Demand. This book was released on 2018-05-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main idea of this study is to scrutinize the performance efficiency and enhancement of modelling and simulations of PEM fuel cell. Besides, the research of PEM fuel cell performance can figure out many critical issues for an alternative resource energy. The chapters collected in the book are contributions by invited researchers with a long-standing experience in different research areas. I hope that the material presented here is understandable to a wide audience, not only energy engineers but also scientists from various disciplines. The book contains nine chapters in three sections: (1) "General Information About PEM Fuel Cell", (2) "PEM Fuel Cell Technology" and (3) "Many Different Applications of PEM Fuel Cell". This book presents detailed and up-to-date evaluations in different areas and was written by academics with experience in their field. It is anticipated that this book will make a scientific contribution to PEM fuel cell and other alternative energy resource workers, researchers, academics, PhD students and other scientists both in the present and in the future.