Download or read book Research and Development of New and Improved Cutting Tool Materials written by E. Dow Whitney and published by . This book was released on 1966 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report are presented the results of effort undertaken during the third quarter of Phase I of a program designed to develop new cutting tool materials for the machining of refractory metals for aerospace applications. Herein are discussed the development of techniques for the fabrication of experimental cutting tools inserts from promising carbide, nitride, and boride systems as well as the results of cutting tests employing various alumina-base tool compositions. (Author).
Download or read book New and Improved Cutting Tool Materials written by E. Dow Whitney and published by . This book was released on 1969 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This final report contains the results of a continued effort designed to develop new and improved ceramic cutting tool inserts for the more efficient and economical machining of the refractory hard metals required in the fabrication of aerospace devices. (Author).
Download or read book Development of Improved Cutting Tool Materials written by F. C. Perkins and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Cutting Tools written by E. Dow Whitney and published by William Andrew. This book was released on 2012-12-02 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in ceramics as a high speed cutting tool material is based primarily on favorable material properties. As a class of materials, ceramics possess high melting points, excellent hardness and good wear resistance. Unlike most metals, hardness levels in ceramics generally remain high at elevated temperatures which means that cutting tip integrity is relatively unaffected at high cutting speeds. Ceramics are also chemically inert against most workmetals.
Download or read book Development of Improved Cutting Tool Materials written by Nathan H. Cook and published by . This book was released on 1969 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.
Download or read book Development of Improved Cutting Tool Materials written by Philip H. Crayton and published by . This book was released on 1963 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Final Report on Development of Improved Cutting Tool Materials written by E. Dow Whitney and published by . This book was released on 1965 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of Improved Cutting Tool Materials written by F. C. Holtz and published by . This book was released on 1962 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1967 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exploratory Development to Improve Standard Cutting Tool Material by Infusion with Metallic Carbides Ceramic Or Diamond written by Alfred Otto Schmidt and published by . This book was released on 1968 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinability of Engineering Materials written by B. Mills and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future. Thus, there will continue to be a requirement for the development of improved cutting tool materials, workpiece materials, cutting fluids and testing methods; collectively this activity can be described as improving machinability. Machinability is a parameter which in many ways is vague, sometimes qualitative and very often misunderstood. The purpose of this text is to give a broad understanding of the concept, methods of assessment and ways of improving machinability to the manufacturing engineer, the metallurgist and the materials scientist. The text should also be of interest to those engaged in research in manufacturing engineering and metal cutting. The text, of necessity, does not attempt to give detailed information about the machining characteristics of a wide range of tool and workpiece materials. It is felt that this is beyond the scope of the book and is best left to other sources, such as machinability data banks and the Machining Handbook*, whose main objective is to present this kind of information. It is hoped that the reader will be able to progress logically from the fundamental aspects of the metal cutting process to the sections on the more specific topics of machinability including machinability testing and the properties of tool and workpiece materials which affect their machining performance.
Download or read book Cutting Tool Technology written by Graham T. Smith and published by Springer Science & Business Media. This book was released on 2008-07-03 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a well acknowledged fact that virtually all of our modern-day components and assemblies rely to some extent on machining operations in their manufacturing process. Thus, there is clearly a substantive machining requirement which will continue to be of prime importance for the foreseeable future. Cutting Tool Technology provides a comprehensive guide to the latest developments in the use of cutting tool technology. The book covers new machining and tooling topics such as high-speed and hard-part machining, near-dry and dry-machining strategies, multi-functional tooling, ‘diamond-like’ and ‘atomically-modified’ coatings, plus many others. Also covered are subjects important from a research perspective, such as micro-machining and artificial intelligence coupled to neural network tool condition monitoring. A practical handbook complete with troubleshooting tables for common problems, Cutting Tool Technology is an invaluable reference for researchers, manufacturers and users of cutting tools.
Download or read book Cutting Tool Material Selection written by Haldon J. Swinehart and published by . This book was released on 1968 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cutting Tool Applications written by George Schneider (Jr.) and published by . This book was released on 2002 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Metal Cutting written by Edward M. Trent and published by Butterworth-Heinemann. This book was released on 2000-01-03 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Cutting Operations and Terminology; The Essential Features of Metal Cutting; Forces in Metal Cutting; Heat in Metal Cutting; Cutting Tool Materials, Steel; Cutting Tool Materials, Carbides; Cutting Tool Materials, Ceramic and Ultrahard; Machinability; Coolants and Lubricants; Bibliography; and Index.
