Download or read book Report 37 Environment Conscious Construction Materials and Systems State of the Art Report of RILEM Technical Committee 192 ECM written by Norimoto Kashino and published by RILEM Publications. This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems written by Manfred N. Partl and published by Springer. This book was released on 2018-02-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.
Download or read book Bio aggregates Based Building Materials written by Sofiane Amziane and published by Springer. This book was released on 2017-02-04 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable. This book includes a state-of-the-art report and an appendix. The state-of-the-art report relates to the description of vegetal aggregates. Then, hygrothermal properties, fire resistance, durability and finally the impact of the variability of the method of production of bio-based concrete are assessed. The appendix is a TC report which presents the experience of a working group. The goal was to define testing methods for the measurement of water absorption, bulk density, particle size distribution, and thermal conductivity of bio aggregates. The work is based on a first round robin test of the TC-BBM where the protocols in use by the different laboratories (labs) are compared. p>
Download or read book Report 41 Internal Curing of Concrete State of the Art Report of RILEM Technical Committee 196 ICC written by Ole Mejlhede Jensen and published by RILEM Publications. This book was released on 2007 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bio Based Building Materials written by Sofiane Amziane and published by Springer Nature. This book was released on 2023-07-15 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 5th International Conference on Bio-Based Building Materials (ICBBM), held in Vienna, Austria, on June 21-23, 2023. Focusing on bio-based building materials (3BM) as well as their applications in sustainable building constructions, the contributions highlight the latest findings in this fast-growing field, addressing topics such as natural fibres- and aggregates, ramped earth, innovative hybrid composites based on bio-based ingredients, novel sustainable binders, energy efficiency aspects- and life cycle analysis of these materials.
Download or read book Testing and Characterisation of Earth based Building Materials and Elements written by Antonin Fabbri and published by Springer Nature. This book was released on 2021-11-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 274-TCE. It focuses on the estimation of the parameters which are necessary to properly design earthen constructions. It provides a compilation of the value classically obtained for the key parameters of earthen materials, a pedagogical presentation of the main testing procedures for earthen materials, their advantage and their drawback and an overview of most standards on earthen materials, whatever their origin and their language.The book is divided into eight chapters. After a general introduction on earthen materials and constructions, the state of the art on the material characterisation technics, the assessment of hygrothermal performance, the mechanical behaviour, seismic resistance and the durability will be presented, each in a dedicated chapter. On the basis of these last chapters, a critical review of the standards which are used for earthen material will be presented in the last chapter. The last chapter is dedicated to the analysis of the environmental potential of earth-based building materials.
Download or read book Methods of Measuring Moisture in Building Materials and Structures written by Lars-Olof Nilsson and published by Springer. This book was released on 2018-04-13 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: RILEM TC 248-MMB was established in 2012 with the main aim to improve and distribute knowledge related to moisture measurement in construction materials in various scientific and industrial applications. Properties and performance of building materials and structures are influenced to a large extent by the moisture conditions in the materials. Obvious examples are heat conductivity, shrinkage and creep, transport properties, most types of deterioration, discoloration etc. For research and applications the moisture conditions must be quantified, by measurements in the laboratory or under field conditions. There is much variation in methods being used, even within the same topic, in different countries, both with regard to materials and to applications. No consensus whatsoever does exist. For the construction industry it is important to be able to quantify the moisture conditions in an accurate way in various applications. This state-of-the-art report is divided into two parts, Principles and Applications, with altogether 28 chapters on various moisture measuring principles and a number of applications.
Download or read book Rheology and Processing of Construction Materials written by Viktor Mechtcherine and published by Springer Nature. This book was released on 2019-08-24 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed contributions presented at two parallel, closely interconnected events on advanced construction materials and processes, namely the 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2) and the 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), held in Dresden, Germany on 8-11 September 2019. The papers discuss various aspects of research on the development, testing, and applications of cement-based and other building materials together with their specific rheological properties. Furthermore, the papers cover the latest findings in the fast-growing field of self-compacting concrete, addressing topics including components’ properties and characterization; chemical admixtures, effect of binders (incl. geopolymers, calcined clay, etc.) and mixture design; laboratory and in-situ rheological testing; constitutive models and flow modelling; numerical simulations; mixing, processing and casting processes; and additive manufacturing / 3D-printing. Also presenting case studies, the book is of interest to researchers, graduate students, and industry specialists, such as material suppliers, consultants and construction experts.
Download or read book Second RILEM International Conference on Earthen Construction written by Christopher Beckett and published by Springer Nature. This book was released on with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RILEM Technical Committee 195 DTD Recommendation for Test Methods for AD and TD of Early Age Concrete written by Øyvind Bjøntegaard and published by Springer. This book was released on 2014-08-28 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the Round-Robin (RR) program and test results including a statistical evaluation of the RILEM TC195-DTD committee named “Recommendation for test methods for autogenous deformation (AD) and thermal dilation (TD) of early age concrete”. The task of the committee was to investigate the linear test set-up for AD and TD measurements (Dilation Rigs) in the period from setting to the end of the hardening phase some weeks after. These are the stress-inducing deformations in a hardening concrete structure subjected to restraint conditions. The main task was to carry out an RR program on testing of AD of one concrete at 20 °C isothermal conditions in Dilation Rigs. The concrete part materials were distributed to 10 laboratories (Canada, Denmark, France, Germany, Japan, The Netherlands, Norway, Sweden and USA), and in total 30 tests on AD were carried out. Some supporting tests were also performed, as well as a smaller RR on cement paste. The committee has worked out a test procedure recommendation which is reported separately and submitted acceptance as a RILEM method.
Download or read book Durability of Strain Hardening Fibre Reinforced Cement Based Composites SHCC written by G.P.A.G. Van Zijl and published by Springer Science & Business Media. This book was released on 2010-12-06 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC) were named after their ability to resist increased tensile force after crack formation, over a significant tensile deformation range. The increased resistance is achieved through effective crack bridging by fibres, across multiple cracks of widths in the micro-range. Whether these small crack widths are maintained under sustained, cyclic or other load paths, and whether the crack width limitation translates into durability through retardation of ingress of moisture, gas and other deleterious matter, are scrutinized in this book by evaluation of test results from several laboratories internationally. The durability of SHCC under mechanical, chemical, thermal and combined actions is considered, both for the composite and the fibre types typically used in SHCC. The compilation of this state-of-the-art report has been an activity of the RILEM TC 208-HFC, Subcommittee 2: Durability, during the committee life 2005-2009.
Download or read book Bonded Cement Based Material Overlays for the Repair the Lining or the Strengthening of Slabs or Pavements written by Benoît Bissonnette and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among different approaches that can be considered for concrete rehabilitation, bonded overlays are often the most economical alternative. The primary purpose of overlays is to extend the life of the candidate structures, either by restoring the quality and integrity of the surface and/or the re-establishing or improving the load-carrying capacity. Nevertheless, the durability of bonded overlay systems still draws concerns in the technical community because of bond sustainability problems encountered in a number of cases. At this time, there is still no accepted design approach or methodology that can warrant the practitioner a successful outcome of the repair. This State-of-Art report summarizes the findings with respect to all aspects involved in the overlaying process.
Download or read book Modelling of Corroding Concrete Structures written by Carmen Andrade and published by Springer Science & Business Media. This book was released on 2011-02-04 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the papers presented at the Fib-RILEM workshop held in Madrid, Spain, in November 2010. The assessment of deterioration and aging of concrete structures, most commonly through reinforcement corrosion, is not considered in current structural codes or standards. Some guidelines manuals exist, and research has been done, but there is as yet no accepted methodology nor models that could be used by engineers. This book deals with all aspects related to modelling of corroding structures and provides state-of-the-art information on structural models for corroding structures.
Download or read book Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials written by Nele De Belie and published by Springer. This book was released on 2017-12-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the current knowledge on the effect of SCMs (slag, fly ash, silica fume, limestone powder, metakaolin, natural pozzolans, rice husk ash, special SCMs, ternary blends) on the properties of fresh and hardened concrete (e.g. early strength development, workability, shrinkage) and curing requirements. Other topics treated in the book are postblending vs preblending, implications of SCM variability, interaction between SCM and commonly used admixtures (e.g. superplasticizers, air entrainers).
Download or read book Progress of Recycling in the Built Environment written by Enric Vázquez and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a useful tool for countries starting to recycle aggregates or construction and demolition waste. It contains the latest developments in this field, introduces a completely new approach to the procedure of proportioning concrete mixtures with recycled aggregate, references recent publications, opinions and discrepancies in relation to the durability of recycled concrete, such as freeze-thaw standards, studies of chloride penetration and diffusion, and sulfate attacks, the use of the fine fraction This volume will be of interest to recyclers, researchers and consumers.
Download or read book International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement based Materials and Concrete Structures written by Agnieszka Jędrzejewska and published by Springer Nature. This book was released on 2023-06-08 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advances, innovations, and applications in cement-based materials (CBM) and concrete structures, as presented by leading international researchers and engineers at the International RILEM Conference on synergizing expertise toward sustainability and robustness of CBM and concrete structures (SynerCrete), held in Milos Island, Greece, on June 14-16, 2023. The aim of the conference was to discuss and arouse progress in research, development, and application of CBM and structural concrete through combination of expertise from distinct fields of knowledge, such as performance-based design, 3D modeling for analysis/design, building information modeling, and even robotics, while keeping focus on multiscale approaches at time and spatial levels. It covers a diverse range of topics concerning alternative concrete formulations for adaptation to climate change, performance-based and multiphysics/multiscale design and innovative testing, structural health monitoring and maintenance management, integral BIM-based planning, and resource-responsible building. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations. The two volumes encompass more than 200 original contributions in the field.
Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.
