Download or read book Report 31 Advanced Testing of Cement Based Materials during Setting and Hardening Report of RILEM Technical Committee 185 ATC written by Hans W. Reinhardt and published by RILEM Publications. This book was released on 2005 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Techniques for Testing of Cement Based Materials written by Marijana Serdar and published by Springer Nature. This book was released on 2020-02-18 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book examines advanced, non-standardized techniques that have been developed for determining different properties of cement paste, mortar and concrete, and provides state-of-the-art information on methods for monitoring hydration-induced changes in cement-based materials (CBMs). These methods are often nondestructive and allow quasi-continuous monitoring covering the time span from placement of the material to formation of a fully hardened cement composite. The book also presents various applications of acoustic emission for characterizing fresh concrete, recent developments in ultrasonic methods for characterizing CBMs since placement, application of ambient response methods for measuring elastic modulus, methods for determining deformational characteristics of CBMs since setting and methods for in situ measurements of stresses in concrete elements during hardening.
Download or read book Self Healing Phenomena in Cement Based Materials written by Mario de Rooij and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing materials are man-made materials which have the built-in capability to repair damage. Failure in materials is often caused by the occurrence of small microcracks throughout the material. In self-healing materials phenomena are triggered to counteract these microcracks. These processes are ideally triggered by the occurrence of damage itself. Thus far, the self-healing capacity of cement-based materials has been considered as something "extra". This could be called passive self-healing, since it was not a designed feature of the material, but an inherent property of it. Centuries-old buildings have been said to have survived these centuries because of the inherent self-healing capacity of the binders used for cementing building blocks together. In this State-of-the-Art Report a closer look is taken at self-healing phenomena in cement-based materials. It is shown what options are available to design for this effect rather than have it occur as a "coincidental extra".
Download or read book Durability of Strain Hardening Fibre Reinforced Cement Based Composites SHCC written by G.P.A.G. Van Zijl and published by Springer Science & Business Media. This book was released on 2010-12-06 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC) were named after their ability to resist increased tensile force after crack formation, over a significant tensile deformation range. The increased resistance is achieved through effective crack bridging by fibres, across multiple cracks of widths in the micro-range. Whether these small crack widths are maintained under sustained, cyclic or other load paths, and whether the crack width limitation translates into durability through retardation of ingress of moisture, gas and other deleterious matter, are scrutinized in this book by evaluation of test results from several laboratories internationally. The durability of SHCC under mechanical, chemical, thermal and combined actions is considered, both for the composite and the fibre types typically used in SHCC. The compilation of this state-of-the-art report has been an activity of the RILEM TC 208-HFC, Subcommittee 2: Durability, during the committee life 2005-2009.
Download or read book A Framework for Durability Design with Strain Hardening Cement Based Composites SHCC written by Gideon P.A.G. van Zijl and published by Springer. This book was released on 2017-01-05 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the state of the art of the durability of fibre-reinforced strain-hardening cement-based composites (SHCC) and the durability of structures or structural elements manufactured in full or in part with this class of modern construction materials. Highlights include: - Reflection on durability performance of existing applications in patch repair, a water reservoir and highway bridges. - Guidelines for tensile testing towards durability assessment of cracked SHCC. - New crack pattern related ingress rate indices for water and chloride into cracked SHCC. - The influence of low and high temperatures on SHCC durability performance. - The mechanism of crack control reducing ASR and corrosion rate, and results on chloride-induced corrosion of embedded steel reinforcement. - Self-healing of cracks in SHCC. - A conceptual durability design framework for SHCC and R/SHCC structures and members.
Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.
Download or read book Measuring Rheological Properties of Cement based Materials written by Mohammed Sonebi and published by Springer Nature. This book was released on 2023-10-13 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM TC 266-MRP, whose purpose was to enhance the reliability of rheological measurements performed on cement-based materials. It makes users more aware of potential sources of errors in the measurements, and provide guidelines on how to observe, counteract or eliminate the errors. Improving the reliability of rheological measurements will further enhance the use of rheology to investigate different aspects of the fresh properties of cement-based materials. After an introduction into mix design and applications, the book delivers a comprehensive overview of rheology definitions, behavior, and parameters; rheometers; measuring and analysis procedures; difficulties and challenges during measurements; relationships with specific empirical tests; and the behavior of concrete near a surface. This report on the measurement of rheological properties of complex materials such as concrete enables readers to understand the applicable concepts of rheology, and address the challenges on the measuring procedures, the rheological models and some errors and limitations of rheometers used.
Download or read book Digital Fabrication with Cement Based Materials written by Nicolas Roussel and published by Springer Nature. This book was released on 2022-01-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.
Download or read book Bonded Cement Based Material Overlays for the Repair the Lining or the Strengthening of Slabs or Pavements written by Benoît Bissonnette and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among different approaches that can be considered for concrete rehabilitation, bonded overlays are often the most economical alternative. The primary purpose of overlays is to extend the life of the candidate structures, either by restoring the quality and integrity of the surface and/or the re-establishing or improving the load-carrying capacity. Nevertheless, the durability of bonded overlay systems still draws concerns in the technical community because of bond sustainability problems encountered in a number of cases. At this time, there is still no accepted design approach or methodology that can warrant the practitioner a successful outcome of the repair. This State-of-Art report summarizes the findings with respect to all aspects involved in the overlaying process.
Download or read book Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials written by Nele De Belie and published by Springer. This book was released on 2017-12-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the current knowledge on the effect of SCMs (slag, fly ash, silica fume, limestone powder, metakaolin, natural pozzolans, rice husk ash, special SCMs, ternary blends) on the properties of fresh and hardened concrete (e.g. early strength development, workability, shrinkage) and curing requirements. Other topics treated in the book are postblending vs preblending, implications of SCM variability, interaction between SCM and commonly used admixtures (e.g. superplasticizers, air entrainers).
Download or read book RILEM Technical Committee 195 DTD Recommendation for Test Methods for AD and TD of Early Age Concrete written by Øyvind Bjøntegaard and published by Springer. This book was released on 2014-08-28 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the Round-Robin (RR) program and test results including a statistical evaluation of the RILEM TC195-DTD committee named “Recommendation for test methods for autogenous deformation (AD) and thermal dilation (TD) of early age concrete”. The task of the committee was to investigate the linear test set-up for AD and TD measurements (Dilation Rigs) in the period from setting to the end of the hardening phase some weeks after. These are the stress-inducing deformations in a hardening concrete structure subjected to restraint conditions. The main task was to carry out an RR program on testing of AD of one concrete at 20 °C isothermal conditions in Dilation Rigs. The concrete part materials were distributed to 10 laboratories (Canada, Denmark, France, Germany, Japan, The Netherlands, Norway, Sweden and USA), and in total 30 tests on AD were carried out. Some supporting tests were also performed, as well as a smaller RR on cement paste. The committee has worked out a test procedure recommendation which is reported separately and submitted acceptance as a RILEM method.
Download or read book Testing and Characterisation of Earth based Building Materials and Elements written by Antonin Fabbri and published by Springer Nature. This book was released on 2021-11-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 274-TCE. It focuses on the estimation of the parameters which are necessary to properly design earthen constructions. It provides a compilation of the value classically obtained for the key parameters of earthen materials, a pedagogical presentation of the main testing procedures for earthen materials, their advantage and their drawback and an overview of most standards on earthen materials, whatever their origin and their language.The book is divided into eight chapters. After a general introduction on earthen materials and constructions, the state of the art on the material characterisation technics, the assessment of hygrothermal performance, the mechanical behaviour, seismic resistance and the durability will be presented, each in a dedicated chapter. On the basis of these last chapters, a critical review of the standards which are used for earthen material will be presented in the last chapter. The last chapter is dedicated to the analysis of the environmental potential of earth-based building materials.
Download or read book Report 30 Use of Recycled Materials Final report of RILEM Technical Committee 198 URM written by Charles F. Hendriks and published by RILEM Publications. This book was released on 2005 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bio aggregates Based Building Materials written by Sofiane Amziane and published by Springer. This book was released on 2017-02-04 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable. This book includes a state-of-the-art report and an appendix. The state-of-the-art report relates to the description of vegetal aggregates. Then, hygrothermal properties, fire resistance, durability and finally the impact of the variability of the method of production of bio-based concrete are assessed. The appendix is a TC report which presents the experience of a working group. The goal was to define testing methods for the measurement of water absorption, bulk density, particle size distribution, and thermal conductivity of bio aggregates. The work is based on a first round robin test of the TC-BBM where the protocols in use by the different laboratories (labs) are compared. p>
Download or read book Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems written by Manfred N. Partl and published by Springer. This book was released on 2018-02-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.
Download or read book RILEM Recommendations for the Prevention of Damage by Alkali Aggregate Reactions in New Concrete Structures written by Philip J. Nixon and published by Springer. This book was released on 2015-09-30 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the full set of RILEM Recommendations which have been produced to enable engineers, specifiers and testing houses to design and produce concrete which will not suffer damage arising from alkali reactions in the concrete. There are five recommended test methods for aggregates (designated AAR-1 to AAR-5), and an overall recommendation which describes how these should be used to enable a comprehensive aggregate assessment (AAR-0). Additionally, there are two Recommended International Specifications for concrete (AAR-7.1 & 7.2) and a Preliminary International Specification for dams and other hydro structures (AAR-7.3), which describe how the aggregate assessment can be combined with other measures in the design of the concrete to produce a concrete with a minimised risk of developing damage from alkali-aggregate reactions.
Download or read book 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials written by Francesco Canestrari and published by Springer. This book was released on 2015-09-24 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
