Download or read book Removal of Heavy Metal Ions and Diethylenetriamine Species from Solutions by Magnetic Activated Carbon written by Kaiwen Liu and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption of Heavy Metal Ion Species from Aqueous Solution in Activated Carbon written by Yong Feng Jia and published by . This book was released on 2000 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biosorption of Heavy Metals written by Bohumil Volesky and published by CRC Press. This book was released on 1990-08-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art volume represents the first comprehensively written book which focuses on the new field of biosorption. This fascinating work conveys essential fundamental information and outlines the perspectives of biosorption. It summarizes the metal-sorbing properties of nonliving bacterial, fungal, and algal biomass, plus highlights relevant metal-binding mechanisms. This volume also discusses the aspects of obtaining and processing microbial biomass and metal-chelating chemicals into industrially applicable biosorbent products. Microbiologists, chemists, and engineers with an interest in new technological and scientific horizons will find this reference indispensable.
Download or read book Best Practice Guide on Metals Removal From Drinking Water By Treatment written by Mustafa Ersoz and published by IWA Publishing. This book was released on 2012-05-31 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! The EU Drinking Water Directive sets a range of standards for metals and related substances in drinking water, many of which are concerned with health protection. A number of these standards are very stringent and require compliance to be assessed at the point of use. Because of the difficulties associated with monitoring, historic practices in many countries have concentrated on the quality of water within the distribution network. As a result, the magnitude of problems with some metals and related substances in drinking water is not fully appreciated in all European countries, and the extent and nature of corrective actions differ widely. This Best Practice Guide on Metals Removal From Drinking Water By Treatment describes drinking water standards and regulations, and explains the impact of a range of water treatment processes on metal levels in drinking water. Its objectives are to provide a basis for assessing the extent of problems and to identify appropriate water treatment options. The Guide provides a reasoned guide to selection of key water treatment processes. Each chapter focuses on a specific water treatment process and has been written by experts in that particular process. Best Practice Guide on Metals Removal From Drinking Water By Treatment provides practice-based knowledge for water engineers and scientists in large and small water utilities, regulatory agencies, health agencies and local municipalities (from cities through to small rural communities). It also supports university level teaching in degree schemes that relate to water management. This Guide is one of a series produced by the International Water Association’s Specialist Group on Metals and Related Substances in Drinking Water. The series is an up-to-date compilation of a range of scientific, engineering, regulatory and operational issues concerned with the control and removal of metals from drinking water.
Download or read book Activated Carbon Process for Treatment of Wastewaters Containing Hexavalent Chromium written by Chin P. Huang and published by . This book was released on 1979 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aqueous Phase Adsorption written by Jayant K Singh and published by CRC Press. This book was released on 2018-10-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers theoretical aspects of adsorption, followed by an introduction to molecular simulations and other numerical techniques that have become extremely useful as an engineering tool in recent times to understand the interplay of different mechanistic steps of adsorption. Further, the book provides brief experimental methodologies to use, test, and evaluate different types of adsorbents for water pollutants. Through different chapters contributed by accomplished researchers working in the broad area of adsorption, this book provides the necessary fundamental background required for an academician, industrial scientist or engineer to initiate studies in this area. Key Features Explores fundamentals of adsorption-based separation Provides physical insight into aqueous phase adsorption Includes theory, molecular and mesoscopic level simulation techniques and experiments Describes molecular simulations and lattice-Boltzmann method based models for aqueous phase adsorption Presents state-of-art experimental works particularly addressing removal of "emerging pollutants" from aqueous phase
Download or read book Green Adsorbents to Remove Metals Dyes and Boron from Polluted Water written by Inamuddin and published by Springer Nature. This book was released on 2020-08-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews adsorption techniques to clean wastewater, with focus on pollution by dyes and heavy metals. Advanced adsorbents include carbon nanomaterials, biomass, cellulose, polymers, clay, composites and chelating materials.
Download or read book Adsorption of Heavy Metals by Using Activated Carbon written by Mohamed El Zayat and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this Book, The utilization of agricultural waste to produce valuable products has been investigated to minimize serious public health risks from exposure to dangerous fumes that come from burning the agricultural wastes in open fields. In this study, activated carbon produced from cotton stalks was examined for the removal of target heavy metal contaminants from water and wastewater. Adsorption studies conducted in completely mixed batch reactors and continuous flow columns showed a good affinity of the produced activated carbon to remove heavy metals, namely lead, cadmium and copper from aqueous solutions compared to other commercial adsorbents. The highest adsorption capacity was for lead, followed by copper and then cadmium. Multicomponent metal adsorption experiments indicated a competition for the available surface sites. Adsorption capacities in the mixture were reduced from their single-solute values for all metals.
Download or read book The Removal of Plumbum and Zinc Using Activated Carbon written by Asong Angkat and published by . This book was released on 2008 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project was about removing heavy metal, Pb and Zn using activated carbon and to investigate the effect of activated carbon dosage and pH of heavy metal solution during the experiment. In the experiment, the effect of different particle size of activated carbon also being studied. The experiment was using different doses of activated carbon to investigate the removal of heavy metal. It was carried by adding different doses of activated carbon to stock solution. Besides, it was also tested at different value of pH, which was done by adding an amount of activated carbon that gives the best performance into different pH of stock solution to get the maximum heavy metal removal. The powdered and granular activated carbon (GAC) used to see the different effect. To get the maximum effect, the solution was well mixed using the orbital shaker for 1 hour at 30oC. Samples were taken after it mixed and analyzed using Atomic Absorption Spectrophotometer (AAS). From the result, pH 10 gives the highest removal percentage of the heavy metal which is 92.8% for zinc ion and 93.36% for plumbum ion. From the result also, the removal percentage of heavy metal ion was highest when 5g of activated carbon was added to both simulated waste water. The removal percentage was 47.2% for zinc ion and 62.68% for plumbum ion. The result also shows that the powdered activated carbon (PAC) can increase the percentage of heavy metal ion removal compare to GAC. The removal percentage was 95.2% when the PAC was used while 53.74% for GAC. As conclusion, we know that activated carbon dosage and pH totally influence the removal of heavy metal ion.-Author.
Download or read book Handbook of Bionanocomposites written by Shakeel Ahmed and published by CRC Press. This book was released on 2018-08-06 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced bionanocomposite materials continue to be increasingly popular and are important for a wide range of scientific and engineering applications. In the race to exploit the unique mechanical, thermal, and electrical properties of bionanocomposite materials, researchers need to address new challenges in predicting, understanding, and managing the potentially adverse effects these materials could have on the environment and human life. This book focuses on the fundamentals of bionanostructured materials and bionanocomposites. It deals with some recent developments in the synthesis and characterization of bionanomaterials as well as their incorporation into polymer matrixes. The biological applications of bionanomaterials are also discussed in detail, along with the synthesis of bionanostructured materials and bionanocomposites, reviews of food packing, water remediation, heavy metal ion adsorption from wastewaters, and other industrial applications. This book is aimed at beginners in this field as well as advanced undergraduate- and graduate-level students of materials science and researchers working in the fields of bionanocomposites, nanotechnology, and analytical chemistry, especially those with an interest in materials for analytical applications.
Download or read book Heavy Metals In Water written by Sanjay K. Sharma and published by Royal Society of Chemistry. This book was released on 2014 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest research on dissolved heavy metals in drinking water and their removal.
Download or read book Adsorption Technology written by Frank L. Slejko and published by CRC Press. This book was released on 1985-03-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the non-specialist involved with evaluating adsorption technology for specific applications, Adsorption Technology provides a timely, hands-on source of step-by-step fundamentals required to meet the needs of all types of adsorption situations. Presenting theoretical and practical information adaptable to granular activated carbon as well as synthetic adsorbents, this illustrated, easy-to-use guide offers convenient access to: principles of adsorption theory, isotherms, and the physical basis for mathematical models ... understanding of laboratory experiments needed to screen adsorbents for new applications ... procedures for testing and evaluating adsorbents in pilot plant studies ... methods for developing conceptual flowsheets for subsequent engineering cost estimating ... and more. With this important reference, industrial process, chemical, and environmental engineers and chemists now have a dependable single source to turn to for a solid, working understanding of applied adsorption technology. Moreover, this volume is an ideal text for graduate-level courses in chemical and environmental engineering, as well as continuing education courses and professional seminars. Book jacket.
Download or read book Extraction of Metal Ions from Aqueous Solution Using Activated Carbon written by Roslan Khairuddin and published by . This book was released on 1993 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Adsorbents for Pollutant Removal written by Grégorio Crini and published by Springer. This book was released on 2018-06-27 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume on adsorption using green adsorbents and is written by international contributors who are the leading experts in the adsorption field. The first volume provides an overview of fundamentals and design of adsorption processes. For people who are new to the field, the book starts by two overview chapters presenting the principles and properties of wastewater treatment and adsorption processes. The book also provides a comprehensive source of knowledge on acid-base properties of biosorbents. It discusses fractal-like kinetic models for fluid-solid adsorption, reports on the chemical characterization of oxidized activated carbons for metal removal, and the use of magnetic biosorbents in water treatment. Furthermore, the thermodynamic properties of metals adsorption by green adsorbents, and biosorption of polycyclic aromatic hydrocarbons and organic pollutants are reviewed, and finally the recent trends and impact of nanomaterials as green adsorbent and potential catalysts for environmental applications are summarized. The audience for this book includes students, environmentalists, engineers, water scientists, civil and industrial personnel who wish to specialize in adsorption technology. Academically, this book will be of use to students in chemical and environmental engineering who wish to learn about adsorption and its fundamentals. It has also been compiled for practicing engineers who wish to know about recent developments on adsorbent materials in order to promote further research toward improving and developing newer adsorbents and processes for the efficient removal of pollutants from industrial effluents. It is hoped that the book will serve as a readable and useful presentation not only for undergraduate and postgraduate students but also for the water scientists and engineers and as a convenient reference handbook in the form of numerous recent examples and appended information.
Download or read book Sorption Processes and Pollution written by Grégorio Crini and published by Presses Univ. Franche-Comté. This book was released on 2010 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Age Waste Water Problems written by Mohammad Oves and published by Springer. This book was released on 2019-06-12 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a picture of the advances in the research of theoretical and practical frameworks of wastewater problems and solutions. The book deals with a basic concept and principles of modern biological, chemical and technical approaches to remediate various hazardous pollutants from wastewater. The latest empirical research findings in wastewater treatment are comprehensively discussed. Examples of low-cost technologies are also included. The book is written for professionals, researchers, academics and students wanting to improve their understanding of the strategic role of environmental protection and advanced applied technologies.
Download or read book The removal of heavy metal ions and organics from aqueous solutions using a reticulated vitreous carbon cathode cell written by Carlos Ponce de León Albarrán and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
