Download or read book Remote Sensing and GIS Applications A Starter Guide written by D.C. Joshi and published by Scientific Publishers. This book was released on 2019-03-02 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Satellite Remote Sensing and GIS, a new fast developing technology, has potential for quick and accurate assessment and characterization of natural resources potentials. Nowadays, for any small query, planning and management of natural resources, one can nd quick answer by referring the satellite images. But, satellite images have to be interpreted which requires training and skill. During recent years, at many Universities, at graduate and post graduate degree courses of engineering, agriculture, forestry, geology, geography and environmental sciences, Remote sensing and Geographical Information System (GIS) has been added as a part of syllabus. Keeping in mind, this book has been written, in simple explanatory language with illustrations, so that even novice and inexperienced person can understand and interpret the satellite images. There are 19 chapters in the book, covering two aspects, (1) Fundamentals of Remote Sensing Technology which includes satellites and sensors, spectral reectance characteristics of objects on earth surface, satellite image interpretation techniques and GIS, and (2) Applications of the Technology for identication, mapping and monitoring of landforms, soil, surface and ground water and forest resources; land use/ land cover classication and wasteland mapping; land degradation and desertication classication and mapping; crop identication and acreage estimation, watershed development planning and monitoring; natural calamities and disaster management. Each topic has been elaborately explained with case studies to meet the requirement of the students, teachers, and natural resource planners.
Download or read book Laboratory and Field Manual on Irrigation Engineering written by R.J. Patel and published by Scientific Publishers. This book was released on 2019-06-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The irrigation water is considered as the essential input for crop production. Over exploitation of natural water resources has caused a menace for the future human generations. The depletion of underground water table in high productivity areas and under utilization of the water resources in rain fed areas of the country, poor irrigation efficiency and high seepage losses from conveyance system, poor land development and mismanagement of the irrigation water resources has acquired alarming proportions. As the share of water for agriculture in future is going to reduce, there will be tremendous pressure to produce more per drop of water in order to meet the food and other requirements of burgeoning population of the country. The existing irrigation water resources are not utilized judiciously and their mismanagement has lead to problems like low production efficiency, salinization, water logging and degradation of land. To manage these problems and increase the production efficiency of irrigation, it is pertinent to adopt judicious methods of irrigation water use, by efficient on-farm irrigation management based on scientific approach. Therefore, a comprehensive knowledge of available soil moisture and its constants, scheduling and quality of irrigation water and proper drainage techniques is crucial. This manual on irrigation engineering is an attempt to fulfil this urgent need as it covers all major aspects of irrigation water management. Although, manual is meant primarily for the students of agricultural universities, yet it will provide valuable basic information and guide to the scientific community and field functionaries.
Download or read book GIS For Dummies written by Michael N. DeMers and published by John Wiley & Sons. This book was released on 2009-02-17 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: An easy-to-understand reference for navigating through geographic information systems (GIS) GIS (geographic information system) is a totally cool technology that has been called "geography on steroids." GIS is what lets you see the schools in your neighborhood or tells you where the nearest McDonald's is. GIS For Dummies tells you all about mapping terminology and digital mapping, how to locate geographic features and analyze patterns such as streets and waterways, and how to generate travel directions, customer location lists, and much more with GIS. Whether you're in charge of creating GIS applications for your business or you simply love maps, you'll find GIS For Dummies is packed with information. For example, you can: Learn all the hardware and software necessary to collect, analyze, and manipulate GIS data Explore the difference between 2D and 3D maps, create a map, or manage multiple maps Analyze patterns that appear in maps and interpret the results Measure distance in absolute, comparative, and functional ways Recognize how spatial factors relate to geographic data Discover how GIS is used in business, the military, city planning, emergency services, land management, and more Find out how GIS can help you find discover where flooding may occur Determine what your organization needs, do appropriate analyses, and plan and design a GIS system You'll find dozens of applications for GIS queries and analyses, and even learn to create animated GIS output. Additionally, you can learn about sources of GIS data and GIS software vendors (and even what questions to ask potential vendors). Whether your goal is to implement a geographic information system or just have fun, GIS For Dummies will get you there!
Download or read book Geospatial Data Science Quick Start Guide written by Abdishakur Hassan and published by Packt Publishing Ltd. This book was released on 2019-05-31 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the power of location data to build effective, intelligent data models with Geospatial ecosystems Key FeaturesManipulate location-based data and create intelligent geospatial data modelsBuild effective location recommendation systems used by popular companies such as UberA hands-on guide to help you consume spatial data and parallelize GIS operations effectivelyBook Description Data scientists, who have access to vast data streams, are a bit myopic when it comes to intrinsic and extrinsic location-based data and are missing out on the intelligence it can provide to their models. This book demonstrates effective techniques for using the power of data science and geospatial intelligence to build effective, intelligent data models that make use of location-based data to give useful predictions and analyses. This book begins with a quick overview of the fundamentals of location-based data and how techniques such as Exploratory Data Analysis can be applied to it. We then delve into spatial operations such as computing distances, areas, extents, centroids, buffer polygons, intersecting geometries, geocoding, and more, which adds additional context to location data. Moving ahead, you will learn how to quickly build and deploy a geo-fencing system using Python. Lastly, you will learn how to leverage geospatial analysis techniques in popular recommendation systems such as collaborative filtering and location-based recommendations, and more. By the end of the book, you will be a rockstar when it comes to performing geospatial analysis with ease. What you will learnLearn how companies now use location dataSet up your Python environment and install Python geospatial packagesVisualize spatial data as graphsExtract geometry from spatial dataPerform spatial regression from scratchBuild web applications which dynamically references geospatial dataWho this book is for Data Scientists who would like to leverage location-based data and want to use location-based intelligence in their data models will find this book useful. This book is also for GIS developers who wish to incorporate data analysis in their projects. Knowledge of Python programming and some basic understanding of data analysis are all you need to get the most out of this book.
Download or read book GIS for Environmental Applications written by Xuan Zhu and published by Routledge. This book was released on 2022-01-31 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: GIS for Environmental Applications provides a practical introduction to the principles, methods, techniques and tools in GIS for spatial data management, analysis, modelling and visualisation, and their applications in environmental problem solving and decision making. It covers the fundamental concepts, principles and techniques in spatial data, spatial data management, spatial analysis and modelling, spatial visualisation, spatial interpolation, spatial statistics, and remote sensing data analysis, as well as demonstrates the typical environmental applications of GIS, including terrain analysis, hydrological modelling, land use analysis and modelling, ecological modelling, and ecosystem service valuation. Case studies are used in the text to contextualise these subjects in the real world, examples and detailed tutorials are provided in each chapter to show how the GIS techniques and tools introduced in the chapter can be implemented using ESRI ArcGIS (a popular GIS software system for environmental applications) and other third party extensions to ArcGIS to address. The emphasis is placed on how to apply or implement the concepts and techniques of GIS through illustrative examples with step-by-step instructions and numerous annotated screen shots. The features include: Over 350 figures and tables illustrating how to apply or implement the concepts and techniques of GIS Learning objectives along with the end-of-chapter review questions Authoritative references at the end of each chapter GIS data files for all examples as well as PowerPoint presentations for each chapter downloadable from the companion website. GIS for Environmental Applications weaves theory and practice together, assimilates the most current GIS knowledge and tools relevant to environmental research, management and planning, and provides step-by-step tutorials with practical applications. This volume will be an indispensable resource for any students taking a module on GIS for the environment.
Download or read book Remote Sensing and GIS for Ecologists written by Martin Wegmann and published by Pelagic Publishing Ltd. This book was released on 2016-02-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book about how ecologists can integrate remote sensing and GIS in their daily work. It will allow ecologists to get started with the application of remote sensing and to understand its potential and limitations. Using practical examples, the book covers all necessary steps from planning field campaigns to deriving ecologically relevant information through remote sensing and modelling of species distributions. All practical examples in this book rely on OpenSource software and freely available data sets. Quantum GIS (QGIS) is introduced for basic GIS data handling, and in-depth spatial analytics and statistics are conducted with the software packages R and GRASS. Readers will learn how to apply remote sensing within ecological research projects, how to approach spatial data sampling and how to interpret remote sensing derived products. The authors discuss a wide range of statistical analyses with regard to satellite data as well as specialised topics such as time-series analysis. Extended scripts on how to create professional looking maps and graphics are also provided. This book is a valuable resource for students and scientists in the fields of conservation and ecology interested in learning how to get started in applying remote sensing in ecological research and conservation planning.
Download or read book Natural Resource Management written by B.W. Pandey (ed. By) and published by Mittal Publications. This book was released on 2005-01-01 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Remote Sensing Image Fusion written by Christine Pohl and published by CRC Press. This book was released on 2016-10-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remote Sensing Image Fusion: A Practical Guide gives an introduction to remote sensing image fusion providing an overview on the sensors and applications. It describes data selection, application requirements and the choice of a suitable image fusion technique. It comprises a diverse selection of successful image fusion cases that are relevant to other users and other areas of interest around the world. The book helps newcomers to obtain a quick start into the practical value and benefits of multi-sensor image fusion. Experts will find this book useful to obtain an overview on the state of the art and understand current constraints that need to be solved in future research efforts. For industry professionals the book can be a great introduction and basis to understand multisensor remote sensing image exploitation and the development of commercialized image fusion software from a practical perspective. The book concludes with a chapter on current trends and future developments in remote sensing image fusion. Along with the book, RSIF website provides additional up-to-date information in the field.
Download or read book Exploring the Earth with QGIS written by Fatwa Ramdani and published by Springer Nature. This book was released on 2023-12-23 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid advancements in satellite technology, earth remote sensing has become an indispensable tool for a wide range of applications, from environmental monitoring to disaster management. However, the vast amount of data generated by these satellites can be overwhelming for many researchers and practitioners who lack the necessary skills and tools to process and analyze it. This is where QGIS comes in. QGIS is a powerful, open-source Geographic Information System (GIS) software that has been extensively used in the field of earth remote sensing. It provides a user-friendly platform for processing, analyzing, and visualizing satellite imagery, enabling users to unlock the full potential of earth remote sensing data. The purpose of this book is to help researchers and practitioners who lack the necessary skills and tools to process and analyze satellite imagery using QGIS. There are several books that cover the use of QGIS for earth remote sensing, but most of them are either too technical or too general. This book fills this gap by providing a comprehensive and user-friendly guide to using QGIS for earth remote sensing applications. It includes a range of real-world case studies that demonstrate the power and versatility of QGIS for solving complex problems in earth remote sensing. This will provide readers with practical examples of how to use QGIS for earth remote sensing and inspire them to explore new applications and possibilities. The book is intended for GIS professionals, students (undergraduate and graduate), and researchers who are interested in using QGIS for earth remote sensing applications. It will be particularly useful for those who are new to QGIS or who want to expand their knowledge of the software for remote sensing purposes.
Download or read book Essentials of Geographic Information Systems written by Michael Edward Shin and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Remote Sensing written by Floyd F. Sabins, Jr. and published by Waveland Press. This book was released on 2020-04-01 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remote sensing has undergone profound changes over the past two decades as GPS, GIS, and sensor advances have significantly expanded the user community and availability of images. New tools, such as automation, cloud-based services, drones, and artificial intelligence, continue to expand and enhance the discipline. Along with comprehensive coverage and clarity, Sabins and Ellis establish a solid foundation for the insightful use of remote sensing with an emphasis on principles and a focus on sensor technology and image acquisition. The Fourth Edition presents a valuable discussion of the growing and permeating use of technologies such as drones and manned aircraft imaging, DEMs, and lidar. The authors explain the scientific and societal impacts of remote sensing, review digital image processing and GIS, provide case histories from areas around the globe, and describe practical applications of remote sensing to the environment, renewable and nonrenewable resources, land use/land cover, natural hazards, and climate change. • Remote Sensing Digital Database includes 27 examples of satellite and airborne imagery that can be used to jumpstart labs and class projects. The database includes descriptions, georeferenced images, DEMs, maps, and metadata. Users can display, process, and interpret images with open-source and commercial image processing and GIS software. • Flexible, revealing, and instructive, the Digital Image Processing Lab Manual provides 12 step-by-step exercises on the following topics: an introduction to ENVI, Landsat multispectral processing, image processing, band ratios and principal components, georeferencing, DEMs and lidar, IHS and image sharpening, unsupervised classification, supervised classification, hyperspectral, and change detection and radar. • Introductory and instructional videos describe and guide users on ways to access and utilize the Remote Sensing Digital Database and the Digital Image Processing Lab Manual. • Answer Keys are available for instructors for questions in the text as well as the Digital Image Processing Lab Manual.
Download or read book Remote Sensing of Urban and Suburban Areas written by Tarek Rashed and published by Springer Science & Business Media. This book was released on 2010-06-03 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Remote Sensing of Urban and Suburban Areas" provides instructors with a text reference that has a logical and easy-to-follow flow of topics around which they can structure the syllabi of their urban remote sensing courses. Topics have been chosen to bridge the gap between remote sensing and urban studies through a better understanding of the science that underlies both fields. In so doing, the book includes 17 chapters written by leading international experts in respected fields to provide a balanced coverage of fundamental issues in both remote sensing and urban studies. Emphasis is placed on: theoretical and practical issues in contemporary urban studies and remote sensing; the spectral, spatial and temporal requirements of remotely sensed data in relation to various urban phenomena; methods and techniques for analyzing and integrating remotely sensed data and image processing with geographic information systems to address urban problems; and examples of applications in which applying remote sensing to tackle urban problems is deemed useful and important.
Download or read book Spatial Cloud Computing written by Chaowei Yang and published by CRC Press. This book was released on 2013-12-04 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the benefits of cloud computing in geoscience research and applications as well as future research directions, Spatial Cloud Computing: A Practical Approach discusses the essential elements of cloud computing and their advantages for geoscience. Using practical examples, it details the geoscience requirements of cloud computing, covers general procedures and considerations when migrating geoscience applications onto cloud services, and demonstrates how to deploy different applications. The book discusses how to choose cloud services based on the general cloud computing measurement criteria and cloud computing cost models. The authors examine the readiness of cloud computing to support geoscience applications using open source cloud software solutions and commercial cloud services. They then review future research and developments in data, computation, concurrency, and spatiotemporal intensities of geosciences and how cloud service can be leveraged to meet the challenges. They also introduce research directions from the aspects of technology, vision, and social dimensions. Spatial Cloud Computing: A Practical Approach a common workflow for deploying geoscience applications and provides references to the concepts, technical details, and operational guidelines of cloud computing. These features and more give developers, geoscientists, and IT professionals the information required to make decisions about how to select and deploy cloud services.
Download or read book Remote Sensing GIS Applications written by and published by . This book was released on 2009 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Web GIS written by Pinde Fu and published by Esri Press. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a balance of principles, concepts, and techniques to guide readers toward an understanding of how the World Wide Web can expand and modernize the way you use GIS technology.-- [book cover]
Download or read book Elements of Photogrammetry with Application in GIS Fourth Edition written by Paul R. Wolf and published by McGraw Hill Professional. This book was released on 2013-10-22 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to photogrammetry--fully updated Thoroughly revised to cover the latest technological advances in the field, Elements of Photogrammetry with Applications in GIS, Fourth Edition, provides complete details on the foundational principles of photogrammetry as well as important advanced concepts. Significant changes in the instruments and procedures used in modern photogrammetry, including laser scanning, are discussed. Example problems clarify computational procedures and extensive photographs and diagrams illustrate the material presented in this comprehensive resource. Coverage includes: Principles of photography and imaging Cameras and other imaging devices Image measurements and refinements Object space coordinate systems Vertical photographs Stereoscopic viewing Stereoscopic parallax Stereoscopic plotting instruments Laser scanning systems Elementary methods of planimetric mapping for GIS Titled and oblique photographs Introduction to analytical photogrammetry Topographic mapping and spatial data collection Fundamental principles of digital image processing Photogrammetric applications in GIS Control for aerial photogrammetry Aerotriangulation Project planning Terrestrial and close-range photogrammetry
Download or read book Geocomputation with R written by Robin Lovelace and published by CRC Press. This book was released on 2019-03-22 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geocomputation with R is for people who want to analyze, visualize and model geographic data with open source software. It is based on R, a statistical programming language that has powerful data processing, visualization, and geospatial capabilities. The book equips you with the knowledge and skills to tackle a wide range of issues manifested in geographic data, including those with scientific, societal, and environmental implications. This book will interest people from many backgrounds, especially Geographic Information Systems (GIS) users interested in applying their domain-specific knowledge in a powerful open source language for data science, and R users interested in extending their skills to handle spatial data. The book is divided into three parts: (I) Foundations, aimed at getting you up-to-speed with geographic data in R, (II) extensions, which covers advanced techniques, and (III) applications to real-world problems. The chapters cover progressively more advanced topics, with early chapters providing strong foundations on which the later chapters build. Part I describes the nature of spatial datasets in R and methods for manipulating them. It also covers geographic data import/export and transforming coordinate reference systems. Part II represents methods that build on these foundations. It covers advanced map making (including web mapping), "bridges" to GIS, sharing reproducible code, and how to do cross-validation in the presence of spatial autocorrelation. Part III applies the knowledge gained to tackle real-world problems, including representing and modeling transport systems, finding optimal locations for stores or services, and ecological modeling. Exercises at the end of each chapter give you the skills needed to tackle a range of geospatial problems. Solutions for each chapter and supplementary materials providing extended examples are available at https://geocompr.github.io/geocompkg/articles/. Dr. Robin Lovelace is a University Academic Fellow at the University of Leeds, where he has taught R for geographic research over many years, with a focus on transport systems. Dr. Jakub Nowosad is an Assistant Professor in the Department of Geoinformation at the Adam Mickiewicz University in Poznan, where his focus is on the analysis of large datasets to understand environmental processes. Dr. Jannes Muenchow is a Postdoctoral Researcher in the GIScience Department at the University of Jena, where he develops and teaches a range of geographic methods, with a focus on ecological modeling, statistical geocomputing, and predictive mapping. All three are active developers and work on a number of R packages, including stplanr, sabre, and RQGIS.
