Download or read book Remanufacturing and Advanced Machining Processes for New Materials and Components written by Е.S. Gevorkyan and published by Taylor & Francis. This book was released on 2022-03-22 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing and Advanced Machining Processes for Materials and Components presents current and emerging techniques for machining of new materials and restoration of components, as well as surface engineering methods aimed at prolonging the life of industrial systems. It examines contemporary machining processes for new materials, methods of protection and restoration of components, and smart machining processes. • Details a variety of advanced machining processes, new materials joining techniques, and methods to increase machining accuracy • Presents innovative methods for protection and restoration of components primarily from the perspective of remanufacturing and protective surface engineering • Discusses smart machining processes, including computer-integrated manufacturing and rapid prototyping, and smart materials • Provides a comprehensive summary of state-of-the-art in every section and a description of manufacturing methods • Describes the applications in recovery and enhancing purposes and identifies contemporary trends in industrial practice, emphasizing resource savings and performance prolongation for components and engineering systems The book is aimed at a range of readers, including graduate-level students, researchers, and engineers in mechanical, materials, and manufacturing engineering, especially those focused on resource savings, renovation, and failure prevention of components in engineering systems.

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2008-01-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials updates our knowledge on the metal cutting processes in relation to theory and industrial practice. In particular, many topics reflect recent developments, e.g. modern tool materials, computational machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, and generation and modelling of surface integrity. This book addresses the present state and future development of machining technologies. It provides a comprehensive description of metal cutting theory, experimental and modelling techniques along with basic machining processes and their effective use in a wide range of manufacturing applications. Topics covered include fundamental physical phenomena and methods for their evaluation, available technology of machining processes for specific classes of materials and surface integrity. The book also provides strategies for optimalization techniques and assessment of machinability. Moreover, it describes topics not currently covered in other sources, such as high performance and multitasking (complete) machining with a high potential for increasing productivity, and virtual and e-machining. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks but also new potential (emerging) applications such as micro- and nanotechnology. Many practical examples of modern machining technology Applicable for various technical, engineering and scientific levels Collects together 20 years of research in the field and related technical information

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Novel Processes for Advanced Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2013-12-25 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Standing Committee on Defense Materials Manufacturing and Infrastructure (the DMMI standing committee) of the National Materials and Manufacturing Board of the National Research Council (NRC) held a workshop on December 5 and 6, 2012, to discuss new and novel processes in industrial modernization. The participants of the workshop provided their individual opinions but no recommendations were developed as a result of the workshop. The workshop focused on Additive manufacturing, electromagnetic field manipulation of materials, and design of materials. Additive manufacturing is the process of making three-dimensional objects from a digital description or file. The workshop addresses different aspects of additive manufacturing including surface finish and access to manufacturing capabilities and resources. Electromagnetic field manipulation of materials is the use of electric and/or magnetic fields to change the mechanical or functional properties of a material or for the purposes of sintering. The workshop examined research prioritization in this area as well as other objectives. "Design of materials" refers to the application of computational and analytic methods to materials to obtain a desired material characteristic; the workshop features a discussion on materials genomics in this area and more. Novel Processes for Advanced Manufacture: Summary of a Workshop presents a summarization of the key points of this workshop and includes outlines of the open discussions on each area.

Download or read book Advanced Analysis of Nontraditional Machining written by Hong Hocheng and published by Springer Science & Business Media. This book was released on 2012-12-12 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nontraditional machining utilizes thermal, chemical, electrical, mechanical and optimal sources of energy to bind, form and cut materials. Advanced Analysis of Nontraditional Machining explains in-depth how each of these advanced machining processes work, their machining system components, and process variables and industrial applications, thereby offering advanced knowledge and scientific insight. This book also documents the latest and frequently cited research results of a few key nonconventional machining processes for the most concerned topics in industrial applications, such as laser machining, electrical discharge machining, electropolishing of die and mold, and wafer processing for integrated circuit manufacturing.

Download or read book Fundamentals of Machining Processes written by Hassan Abdel-Gawad El-Hofy and published by CRC Press. This book was released on 2013-08-06 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, this second edition of Fundamentals of Machining Processes: Conventional and Nonconventional Processes covers the fundamentals machining by cutting, abrasion, erosion, and combined processes. The new edition has been expanded with two additional chapters covering the concept of machinability and the roadmap for selecting machining processes that meet required design specification. See What’s New in the Second Edition: Explanation of the definition of the relative machinability index and how the machinability is judged Important factors affecting the machinability ratings Machinability ratings of common engineering materials by conventional and nonconventional methods. Factors to be considered when selecting a machining process that meets the design specifications, including part features, materials, product accuracy, surface texture, surface integrity, cost, environmental impacts, and the process and the machine selected capabilities Introduction to new Magnetic Field Assisted Finishing Processes Written by an expert with 37 years of experience in research and teaching machining and related topics, this covers machining processes that range from basic conventional metal cutting, abrasive machining to the most advanced nonconventional and micromachining processes. The author presents the principles and theories of material removal and applications for conventional and nonconventional machining processes, discusses the role of machining variables in the technological characteristics of each process, and provides treatment of current technologies in high speed machining and micromachining. The treatment of the different subjects has been developed from basic principles and does not require the knowledge of advanced mathematics as a prerequisite. A fundamental textbook for undergraduate students, this book contains machining data, solved examples, and review questions which are useful for students and manufacturing engineers.

Download or read book Materials and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2019-06-05 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the materials and traditional processes involved in the manufacturing industry. It discusses the properties and application of different engineering materials as well as the performance of failure tests. The book lists both destructible and non-destructible processes in detail. The design associated with each manufacturing processes, such Casting, Forming, Welding and Machining, are also covered.

Download or read book Advanced Manufacturing Technologies written by Kapil Gupta and published by Springer. This book was released on 2017-04-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Advanced Machining and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2018-04-17 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development. The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.

Download or read book Fundamentals of Machining Processes written by Hassan El-Hofy and published by CRC Press. This book was released on 2018-10-31 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an expert with over 40 years of experience in research and teaching machining and related topics, this new edition textbook presents the principles and theories of material removal and applications for conventional, nonconventional and hybrid machining processes. The new edition is ideal for undergraduate students in production, materials, industrial, mechatronics, marine, mechanical, and manufacturing engineering programs, and also useful for graduate programs related to higher-level machining topics, as well as professional engineers and technicians. All chapters are updated, with additional chapters covering new topics of composite machining, vibration assisted machining and mass finishing operations. Features Presents a wide spectrum of metal cutting, abrasive machining, nonconventional and hybrid machining processes Analyzes the chip formation in machining by cutting and abrasion processes as well as the material removal mechanisms in the nonconventional and the hybrid processes Explains the role of each process variables on its behavior and technological characteristics in terms of material removal, product accuracy and surface quality Portrays the theoretical and empirical formula for removal rates and surface finish in different processes as well as very useful technical data that help in solving and analysis of day-to-day shop floor problems that face manufacturing engineers Clarifies the machinability concept and introduces the general guidelines for machining process selection

Download or read book Remanufacturing in the Circular Economy written by Nabil Nasr and published by John Wiley & Sons. This book was released on 2019-10-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic growth and rising levels of consumption in developing and developed countries has been observed as being deeply coupled with natural resource usage and material consumption. The increasing need for natural resources has raised concerns regarding issues such as resource scarcity, undesirable environmental impacts due to material extraction, primary production, and suboptimal product disposal, and social or political tensions. Product End-of-Life (EoL) options, such as reusing or recycling, attempt to limit or reduce the amount of waste sent to a landfill, providing strategic means to decouple the link between economic growth and resource usage. These EoL options have the potential to close material loops, further utilizing wastes as resources, reducing environmental impacts, conserving natural resources, reducing material prices, and providing job opportunities in developing countries. Remanufacturing, on the other hand, is a unique EoL option due to increasing the number of life cycles of a product before final disposal. First, recurring environmental benefits, such as emission and raw material extraction avoidance are obtained with each additional product life cycle. Second, individual resource efficiency yields increase through product remanufacture. Resource efficiency or, using more with less will continue to compound with each additional life cycle. Third, recirculating products decreases the demand and dependency for primary resource production, further closing the material loop and creating a more circular economy. In addition, remanufacturing can initiate more preferable EoL options such as recovery, recycling, and waste reduction. While remanufacturing offers numerous benefits, there is significant lack of literature and books covering the fundamentals of operations, technologies and business models. The proposed book will provide in-depth coverage of remanufacturing fundamentals and its strong link to circular economy and resource efficiency.

Download or read book Advanced Manufacturing Technologies written by Gopal Prasad Sinha and published by Allied Publishers. This book was released on 2007 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed papers presented at the conference organized by Central Mechanical Engineering Research Institute.

Download or read book Advanced Machining Processes written by Prof. Vijay Kumar Jain and published by Allied Publishers. This book was released on 2009 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Machining Processes written by Hassan Abdel-Gawad El-Hofy and published by McGraw Hill Professional. This book was released on 2005-03-22 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s stringent design requirements and difficult-to-machine materials such as tough super alloys, ceramics, and composites, have made traditional machining processes costly and obsolete. As a result, manufacturers and machine design engineers are turning to advance machining processes. These machining processes utilizes electrical, chemical, and optimal sources of energy to bind, form and cut materials. El-Hofy rigorously explains how each of these advanced machining process work, their machining system components, process variables and industrial applications, making this book the perfect guide for anyone designing, researching or converting to a more advance machining process.

Download or read book CNC Machining Precision Process and Tools Explained written by M. Sheen and published by Power Publishing. This book was released on 2024-06-09 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you're a seasoned machinist or an enthusiastic beginner, understanding the nuances of CNC machining is crucial. "CNC Machining: Precision, Process, and Tools Explained" is your ultimate guide to navigating this intricate world. Are you struggling with complex programming? Frustrated with machine setup issues? Or simply eager to elevate your machining skills? This book addresses all these challenges and more, providing you with the knowledge and confidence to excel. About This Book Comprehensive Overview: Dive into the foundational principles of CNC machining, from basic concepts to advanced techniques. This book covers everything you need to know about the process, ensuring you have a strong grasp on the essentials. Detailed Tool Guides: Explore an in-depth look at the various tools used in CNC machining. Understand their functions, applications, and how to select the right tool for every job, boosting your efficiency and productivity. Troubleshooting Tips: Gain insights into common issues faced during CNC machining and how to resolve them quickly. This book equips you with practical solutions to keep your operations running smoothly. Advanced Techniques: Push your skills further with advanced programming and machining techniques. Discover how to optimize your processes for faster production times and higher quality results. Case Studies and Real-World Examples: Benefit from real-world case studies and examples that illustrate key concepts and best practices. Learn from the successes and challenges of industry professionals. Future Trends and Innovations: Stay ahead of the curve with a look at the future of CNC machining. Explore emerging technologies and trends that are shaping the industry and how you can leverage them to stay competitive. Ready to take your CNC machining expertise to the next level? "CNC Machining: Precision, Process, and Tools Explained" is your gateway to mastering this dynamic field. Don't miss out on the opportunity to enhance your skills and achieve exceptional results. Get your copy today and start your journey to CNC machining excellence!

Download or read book Proceedings of 3rd International Conference and Exhibition on Automobile Engineering 2017 written by ConferenceSeries and published by ConferenceSeries. This book was released on with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: September 28-29, 2017 Berlin, Germany Key Topics : Automotive Engine, Automotive Vehicles and Design Technology, Fuel Economy, Alternate Energy Sources, Automotive Electronics, Vehicular Automation and Automatic Driving, Tire Science and Technology, Braking System, Automotive Safety, Automotive Cyber Security, Automotive Testing, Automotive Industry, Noise, Vibration and Harshness (NVH) in Automobiles, Automotive Ergonomics, Automobile Pollution and Control Management, Emerging Trends in Automotive Engineering,