Download or read book Warranty and Preventive Maintenance for Remanufactured Products written by Ammar Y. Alqahtani and published by CRC Press. This book was released on 2018-12-12 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exponential increase in the development of technology coupled with the customers’ immense desire to possess the newest technological products makes for truncated product lifespans, which instigates a substantial upsurge in their rate of disposal. Attempts have been made to establish specialized product recovery facilities with the intention of diminishing the volume of accumulated waste delivered to landfills using product recovery procedure such as remanufacturing. The economic benefits produced by remanufacturing also portray the role of product recovery in a more attractive light. The quality of a remanufactured product is uncertain for some consumers. Therefore, these consumers possess insecurities in deciding whether or not the remanufactured products will render the same expected performance. This ambiguity regarding a remanufactured product could possibly result in the consumer deciding against its purchase. With such consumer apprehension, remanufacturers often seek market mechanisms that provide reassurance as to the stable durability that these products still maintain. One strategy that the remanufacturers often use is the utilization of the premise of offering product warranties with preventive maintenance on their products. This book is concerned with the practice and theory of warranty management and preventive maintenance, particularly in relation to remanufactured products’ warranties. Models developed in this book can be used for making the right decisions in offering renewable, nonrenewable, one and two dimensional warranty policies, and for managerial decision in considering maintenance contracts or outsourcing maintenance for remanufactured components and products. Features Discusses a variety of warranty policies and preventive maintenance of remanufactured products (first book to do so) Presents mathematical models and applications for warranty policies using examples and simulation results Considers cost and optimization problems from the remanufacturer's and buyer's points of views Provides a foundation for academicians interested in building models in the area of warranty and preventive maintenance analysis of remanufactured products Offers the essential methodology needed by practitioners involved with warranty and preventive maintenance analysis, along with extensive references for further research

Download or read book The Circular Economy and Its Implications on Sustainability and the Green Supply Chain written by Akkucuk, Ulas and published by IGI Global. This book was released on 2019-01-18 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the modern world, solid and liquid waste deposits are mounting due to increasing populations and wealth. Businesses are therefore being put under pressure to pay attention to the environmental and resource consequences of the products they produce and the services they deliver. The Circular Economy and Its Implications on Sustainability and the Green Supply Chain is a collection of innovative research on methods of extending biological cycles found in nature to technological cycles where goods, when disposed properly, are converted into new products in an environmentally efficient way. It examines current research on how to deal with the waste resulting from human activities, the relationship between environmental and human health, and international legislation on waste management. This book is ideally designed for economists, managers, practitioners, academicians, researchers, and students.

Download or read book Remanufactured Goods written by United States International Trade Commis and published by CreateSpace. This book was released on 2015-04-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an industrial process that restores end-of-life goods to their original working condition. This report provides an overview of U.S. remanufactured goods industries and markets, estimates U.S. trade in remanufactured goods, and examines major factors that affected U.S. sales, trade, and investment during 2009-11. The United States is the largest remanufacturer in the world, and between 2009 and 2011, the value of U.S. remanufactured production grew by 15 percent to at least $43.0 billion, supporting 180,000 full-time U.S. jobs. The remanufacturing-intensive sectors that account for the majority of remanufacturing activity in the United States include aerospace, consumer products, electrical apparatus, heavy-duty and off-road equipment, information technology products, locomotives, machinery, medical devices, motor vehicle parts, office furniture, restaurant equipment, and retreaded tires. U.S. exports of remanufactured goods totaled $11.7 billion in 2011; almost 40 percent of the total went to free trade agreement partners. Foreign remanufacturers that have invested in the United States account for about one-sixth of U.S. trade in remanufactured goods and cores (the used or discarded component that is remanufactured). Although the United States and Europe currently account for the bulk of remanufacturing activities and associated trade, other countries are developing their own remanufacturing industries. In foreign markets, regulatory barriers, import bans, and the lack of a common definition of remanufactured goods limit trade in remanufactured goods and cores.

Download or read book Remanufacturing in the Circular Economy written by Nabil Nasr and published by John Wiley & Sons. This book was released on 2019-10-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic growth and rising levels of consumption in developing and developed countries has been observed as being deeply coupled with natural resource usage and material consumption. The increasing need for natural resources has raised concerns regarding issues such as resource scarcity, undesirable environmental impacts due to material extraction, primary production, and suboptimal product disposal, and social or political tensions. Product End-of-Life (EoL) options, such as reusing or recycling, attempt to limit or reduce the amount of waste sent to a landfill, providing strategic means to decouple the link between economic growth and resource usage. These EoL options have the potential to close material loops, further utilizing wastes as resources, reducing environmental impacts, conserving natural resources, reducing material prices, and providing job opportunities in developing countries. Remanufacturing, on the other hand, is a unique EoL option due to increasing the number of life cycles of a product before final disposal. First, recurring environmental benefits, such as emission and raw material extraction avoidance are obtained with each additional product life cycle. Second, individual resource efficiency yields increase through product remanufacture. Resource efficiency or, using more with less will continue to compound with each additional life cycle. Third, recirculating products decreases the demand and dependency for primary resource production, further closing the material loop and creating a more circular economy. In addition, remanufacturing can initiate more preferable EoL options such as recovery, recycling, and waste reduction. While remanufacturing offers numerous benefits, there is significant lack of literature and books covering the fundamentals of operations, technologies and business models. The proposed book will provide in-depth coverage of remanufacturing fundamentals and its strong link to circular economy and resource efficiency.

Download or read book BDEDM 2023 written by Misra Anuranjan and published by European Alliance for Innovation. This book was released on 2023-06-13 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 2nd International Conference on Big Data Economy and Digital Management (BDEDM 2023) supported by University Malaysia Sabah, Malaysia, held on 6th–8th January 2023 in Changsha, China (virtual conference). The immediate purpose of this Conference was to bring together experienced as well as young scientists who are interested in working actively on various aspects of Big Data Economy and Digital Management. The keynote speeches addressed major theoretical issues, current and forthcoming observational data as well as upcoming ideas in both theoretical and observational sectors. Keeping in mind the “academic exchange first” approach, the lectures were arranged in such a way that the young researchers had ample scope to interact with the stalwarts who are internationally leading experts in their respective fields of research. The major topics covered in the Conference are: Big Data in Enterprise Performance Management, Enterprise Management Modernization, Intelligent Management System, Performance Evaluation and Modeling Applications, Enterprise Technology Innovation, etc.

Download or read book Warranty and Preventive Maintenance for Remanufactured Products written by Ammar Y. Alqahtani and published by CRC Press. This book was released on 2018-12-12 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exponential increase in the development of technology coupled with the customers’ immense desire to possess the newest technological products makes for truncated product lifespans, which instigates a substantial upsurge in their rate of disposal. Attempts have been made to establish specialized product recovery facilities with the intention of diminishing the volume of accumulated waste delivered to landfills using product recovery procedure such as remanufacturing. The economic benefits produced by remanufacturing also portray the role of product recovery in a more attractive light. The quality of a remanufactured product is uncertain for some consumers. Therefore, these consumers possess insecurities in deciding whether or not the remanufactured products will render the same expected performance. This ambiguity regarding a remanufactured product could possibly result in the consumer deciding against its purchase. With such consumer apprehension, remanufacturers often seek market mechanisms that provide reassurance as to the stable durability that these products still maintain. One strategy that the remanufacturers often use is the utilization of the premise of offering product warranties with preventive maintenance on their products. This book is concerned with the practice and theory of warranty management and preventive maintenance, particularly in relation to remanufactured products’ warranties. Models developed in this book can be used for making the right decisions in offering renewable, nonrenewable, one and two dimensional warranty policies, and for managerial decision in considering maintenance contracts or outsourcing maintenance for remanufactured components and products. Features Discusses a variety of warranty policies and preventive maintenance of remanufactured products (first book to do so) Presents mathematical models and applications for warranty policies using examples and simulation results Considers cost and optimization problems from the remanufacturer's and buyer's points of views Provides a foundation for academicians interested in building models in the area of warranty and preventive maintenance analysis of remanufactured products Offers the essential methodology needed by practitioners involved with warranty and preventive maintenance analysis, along with extensive references for further research

Download or read book Remanufacturing Modeling and Analysis written by Mehmet Ali Ilgin and published by CRC Press. This book was released on 2016-04-19 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: New, Now, Next. Consumers' ever growing appetite to acquire new products and their short courtship with them has kept manufacturers busy not only expending resources at an alarming rate, but also depleting these resources and giving rise to waste and pollution at a correspondingly increasing and disturbing rate. Traditional manufacturing methods th

Download or read book Three Weeks to eBay Profits Third Edition written by Skip McGrath and published by Union Square & Co.. This book was released on 2013-09-03 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its release, Skip McGraths classic guide to eBay® has been a bestseller—and this completely updated edition will help you navigate the popular websites sweeping rule changes. It covers all the revised features, from the new Top Rated Seller designation to the widespread integration of services such as Paypal and automated UPS/USPS shipping. Sellers will make more money than ever!

Download or read book Computational Intelligence in Remanufacturing written by Xing, Bo and published by IGI Global. This book was released on 2013-12-31 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: In attempts to reduce greenhouse gas emissions, many alternatives to manufacturing have been recommended from a number of international organizations. Although challenges will arise, remanufacturing has the ability to transform ecological and business value. Computational Intelligence in Remanufacturing introduces various computational intelligence techniques that are applied to remanufacturing-related issues, results, and lessons from specific applications while highlighting future development and research. This book is an essential reference for students, researchers, and practitioners in mechanical, industrial, and electrical engineering.

Download or read book Headwinds of Opportunity written by Tim Lindsey and published by Routledge. This book was released on 2017-07-31 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Silver Axiom Business Book Award in the category of Sustainability. Headwinds of Opportunity goes beyond philosophical and academic discussion of business sustainability to offer strategic guidance regarding how to make all types of organizations function more sustainably while simultaneously improving their competitiveness. It differs from other books in that it approaches sustainability as an innovation – an innovative way of conducting business. The book is informed by time-tested principles of innovation diffusion that can be effectively applied to drive change. It places considerable emphasis on the "how-to" aspects of sustainability improvement and how they can be used to increase effectiveness.

Download or read book EcoDesign and Sustainability I written by Yusuke Kishita and published by Springer Nature. This book was released on 2020-11-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights cutting-edge ecodesign research, covering product and service design, smart manufacturing, and social perspectives in ecodesign. Featuring selected papers presented at EcoDesign 2019: 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, it also includes diverse, interdisciplinary approaches to foster ecodesign research and activities. In the context of Sustainable Development Goals (SDGs), it addresses the need for the manufacturing industry to design innovations for sustainable value creation, taking into account technological developments, legislation, and consumer lifestyles. Further, the book discusses the concept of circular economy, which originated in Europe and aims to increase resource efficiency by shifting away from the linear economy. Focusing on product life cycle design and management, smart manufacturing, circular economy, and business strategies, and providing useful approaches and solutions to these emerging concepts, this book is intended for both researchers and practitioners working in the broad field of ecodesign and sustainability.

Download or read book President Obama s Trade Policy Agenda written by United States. Congress. House. Committee on Ways and Means and published by . This book was released on 2011 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Circular Economy for the Management of Operations written by Anil Kumar and published by CRC Press. This book was released on 2020-12-15 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular-Economy is a new concept in operations management. Its goal is to redefine growth, focusing on positive benefits arising for society as a whole out of efficiencies such as designing waste out the operations process. This book will help practitioners use the proper strategy for effective adoption of Circular practices to use in their organization. Features: Provides a complete understanding of Circular-Economy practices Offers advanced mathematical models to help industry management adopt the correct practices Presents a deep understanding of cross-functional and customer-focused design thinking Covers how to develop sustainable practices in all types of activities within operations management. Circular Economy for the Management of Operations will be of interest to practitioners and researchers in engineering as well as business management

Download or read book Blackstone s EU Treaties and Legislation written by Nigel Foster and published by Oxford University Press. This book was released on 2023 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Celebrating over 30 years as the market-leading series, Blackstone's Statutes have an unrivalled tradition of trust and quality. With arock-solid reputation for accuracy, reliability, and authority, they remain first-choice for students and lecturers, providing a carefulselection of all the up-to-date legislation needed for exams and course use.

Download or read book Glocalized Solutions for Sustainability in Manufacturing written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-19 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.

Download or read book Core EU Legislation 2022 23 written by Paul Drury and published by Bloomsbury Publishing. This book was released on 2022-08-11 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well-selected and authoritative, Hart Core Statutes provide the key materials needed by students in a format that is clear, compact and very easy to use. They are ideal for use in exams.

Download or read book The United States Mexico Canada Agreement USMCA written by Leslie Alan Glick and published by Kluwer Law International B.V.. This book was released on 2020-10-19 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: On July 1, 2020, after much expectation and delay, the new United States-Mexico-Canada Agreement (USMCA)—a greatly revised version of the North American Free Trade Agreement (NAFTA) of 1994—came into effect. This timely book by the author of the preeminent guide to NAFTA and an active participant and private sector advocate in the USMCA negotiation and legislative process provides a chapter-by-chapter analysis of the new agreement, clearly describing what has changed from the earlier agreement and what is new. After a concise but expertly calibrated summary of NAFTA, the author proceeds systematically through a practical analysis of each USMCA provision, emphasizing such crucial new elements as the following: new rules on intellectual property rights; stricter rules of origin within the automotive industry; major reforms in Mexican labor laws and their enforceability; opening of Canada’s agricultural and dairy sector to more U.S. competition; entirely new chapter on digital trade; new dispute mechanisms; requirement of an increased minimum wage in auto plants; and a new chapter on environmental standards. Changes in such important aspects of trade as textiles and apparel, ownership of hydrocarbons, cross-border trade in services, and anticorruption measures are also fully described. The USMCA is a response to a United States initiative to renegotiate NAFTA. As a key regional trade agreement with vast global ramifications, familiarity with its content and rules is essential for all business, legal, policymaking, and academic parties concerned with international trade. This useful practical guide will be a welcome addition to private and corporate libraries, including corporate counsel, customs brokers, freight forwarders, logistics and import-export managers, government officials, and academics who need a thorough understanding of the new agreement.